Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Strength Property and Durability on Automotive Front Bumper Guard by Configuration

형상 별 자동차 프런트 범퍼 가드에 대한 강도 특성 및 내구성 연구

  • Han, Moon-Sik (Department of Mechanical & Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National UNIV.)
  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2018.03.31
  • Accepted : 2018.04.20
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The automotive front bumper guard is the most important part of the vehicle for protecting the life of driver when a traffic accident happens. In order to ensure safe driving, this part must possess sufficient strength and durability. This study was carried out with structural and fatigue analyses by designing front bumper guard models. After the lowest value for maximum total deformation and equivalent stress was found through structural analysis and the highest value for fatigue life was found for all three models, it was shown that the type C front bumper guard model was the most suitable for application to a real car. The strength property and durability of the optimum design were determined through this study's results.

Keywords

References

  1. Ku, H. K., Kim, J. W., Won, C. and Song, J. I., "Optimization and Structure Analysis of Brake Disc for Free-fall Winch," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
  2. Jeong, J., Kwon, S. J., Chu, B. and Park, J., "Unified-type Design and Structural Analysis for Mecanum Wheel Performance Improvement," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 117-123, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.117
  3. Cho, J. U. and Han, M. S., "Structural Analysis on Door Hinge of Car," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 33-39, 2010.
  4. Choi, D. S., "Structural Analysis and Design of Small Wind Turbine Blade," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 85-91, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.085
  5. Jang, S. C., "Flow and Structural Analysis at Welding Fume of Automatic Gantry Robot : CFD/CAE and Automatic Convergence Study," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 158-163, 2012.
  6. Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., "Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
  7. Ha, J. S. and Lee, G. M., "A Study on Structure and Vibration Analysis of an Air Suspension Seat," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 47-54, 2017.
  8. Park, Y. C., Park, H. S. and Kim, S. P., "Analysis method on Structural Safety Evaluation of Butterfly Valve of Piping for LNG carrier," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 4, pp. 76-81, 2008.
  9. Park, S. J., Lee, C. M., Kim, W. and Byun, S. S., "A Study on Structural Analysis of Intergrated Machining Center," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 1, pp. 49-54, 2010.
  10. Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., "Structural analysis of a planetary gear carrier in the slewing reducer for tower crane," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.001