• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.39-44
• /
• 2007

This rafer explains a durability test of a large train car body made of carbon/epoxy composite material. The composite car body with the length of 23m was manufactured as a sandwich structure composed of an aluminum honeycomb core and CF1263 woven fabric carbon/epoxy faces. In order to evaluate durability of the composite car body, it was excited by two 500kN capacity hydraulic actuators installed underneath the body bolster. The natural frequency of the composite car body under full weight condition was found to be 4.33Hz. Based on this result, the excitation frequency and displacement of 5Hz and ${\pm}1.0mm$, respectively, were used as inputs for the durability test. The test was conducted for $2{\times}10^6$ cycles. During the test, the nondestructive tests using X-ray radiography and dye penetration method was performed to determine the presence of the cracks. Upon completion of the test, no cracks were found.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.139-144
• /
• 2020

Recently, the electronic equipment industry has become active due to the continuous increase in portable storage media with high-speed information communication, and in particular, the production of SSD(Solid State Drives) for miniaturization of mobile devices and high-speed information communication has increased rapidly. When the SSD is ejecting in the SSD test gender, the necessary ejecting force must be kept constant to have a lifespan applicable to the test device. When the ejecting force increased, it leads to wear of the link for ejecting, which causes a problem in that repeated durability decreases and the ejecting of the SSD becomes impossible. In this paper, the repeated durability test analysis according to the material and the reducing ejecting force design were performed to increase the life of the test gender for SSD inspection. The wear level of the pusher head and ejector was analyzed through repeated durability tests according to the material of the pusher head. The validity of the design was verified through the ejecting force test and repeated durability test of the Test gender, which was designed by carrying out the design to reduce the size and ejecting force of the test gender.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.117-125
• /
• 2004

본 논문에서는 기체 구조건전성 기준서 (MIL-HDBK-1530B) 및 기체 구조건전성 프로그램 (ASIP)에 의거하여 고등 훈련기 (T-50)의 구조건전성평가와 양산 결정자료 획득을 위한 전기체 내구성시험 기법 개발에 대하여 기술하였다. 전기체 부유식 시험조립 기법, 시험하중 최적화 모사 기법, 시험부가 장치 설계 시법, 시험조립 기법, 및 설치 기법, 시험안전장치 설계 및 운용 기법 및 전기체 내구성시험 수행 결과를 수록하였다. 1배 수명 전기체 내구성시험을 성공적으로 수행함으로써 시험기법의 타당성을 입증하였다.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.109-113
• /
• 2003

Concrete and shotcrete should withstand the conditions for which they have been designed, without deterioration, over a period of years. But connote and shotcrete are being deteriorated according to aging by internal and external causes. Recently, many studies on the durability of concrete have been conducted But the durability of shotcrete is rarely studied. So, in this study, chloride ion penetration test freeze and thaw test neutralization test were conducted to examine the durability characteristics of shotcrete with several accelerator and chemical admixture types. These results indicate that shotcrete with allah free accelerator and with superplasticizer are durable. Therefore, the present study provides a fm base to make high performance shotcrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.419-424
• /
• 2000

The primary objectives of this study are to investigate the properties of strength and durability of recycled aggregate concrete was added polypropylene as variables and to fabricate fine concrete in some conditions. The variables are substitution ratios of recycled aggregate(0, 30, 50, 100%) and additions of polypropylene(0, 0.2, 0.5, 1.0%). Compressive strength test to investigate strength properties and freeze-thawing test and drying shrinkage test to durability properties were done. As the result of this study, When variables are substitution ratio(30%) of recycled aggregated and addition(0.5%) of polypropylene, fine concrete was fabricated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1549-1554
• /
• 2008

In this paper, The evaluation of durability of the PC Panel lining for tunnel structure was examined through the rapid test by carbonation and freezing and thawing. Also for the purpose of improvement of durability. Namely, the durable characteristics of PC Panel lining by carbonation and freezing and thawing, was evaluated by rapid test and long-term field exposure test and main influence factors were derived. As a result of test, Correlation of accelerating test in deterioration chamber and long-term field exposure test, it will be expected that the proposed correlation well to the prediction of life expectancy of structure and is contributed greatly in the future.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3889-3894
• /
• 2012

국내 여객을 취급하는 철도역사의 승강장은 간선철도노선의 저상승강장(500mm)과 광역전철구간의 고상승강장(1135mm)으로 구분 운용되고 있다. 저상승강장 전용 중 고속 열차가 수도권 전철구간(고상승강장)과 본선구간(저상승강장)에서 혼용 운영될 경우를 대비하고 안전운전 및 승객편의를 함께 고려하기 위해 저상 고상 승강장 겸용 승강시스템의 개발은 필수적이다. 한편 현재 개발 중인 시스템(스텝)에 대한 국내의 내구성 및 신뢰성 시험 기준은 존재하지 않는다. 따라서 본 연구에서는 저상/고상 승강장 겸용 텔레스코픽 슬라이드방식 승강문 스텝의 개발을 위한 연구 일환으로서, VPD관점에서 내구성 해석을 수행하고 신뢰성 보증시험에 준한 무고장 시험시간동안 실물 리그시험을 통하여 이의 내구성 기준 및 보증수명을 검토하였다.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.57-64
• /
• 2011

In general, the durability performance of a large-sized military truck has been checked through a field durability test which required many man-hours and costs. To reduce these expenses, the durability analysis using a VTL(Virtual Test Lab) at an initial design stage was introduced recently. In this paper, the VTL with a multi-post testrig template for a large-sized truck was developed to compute the load histories transferred to cabin and chassis frame. The VTL consisted of trimmed FE models of cabin, chassis frame, and deck, dynamic models of front and rear suspensions, and a 8-post testrig template. The basic characteristics of the VTL were correlated with experimental results which had been extracted from actual driving test, modal test, and static weight test. The fatigue analysis using MSM(Modal Superposition Method) was applied to evaluate the durability performance of a large-sized military truck. From a series of analytic methods, it is shown that the fatigue analysis process using the VTL could be a useful tool to estimate the fatigue lives and weak areas of a large-sized military truck.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.70-76
• /
• 2022

In this paper, we develops an unmanned test system for the purpose of realizing an actual forklift-based test-bed for the operation durability of the forklift mast. First, two robot actuators were applied to the lever to replace lever manipulation of the operator. For detecting the height of the fork and the tilt angle of the mast, the laser displacement sensor and the inclinometer were installed to the forklift. Next, the embedded control system was used to control the robot actuator with reference to test mode. Experimental evaluation verified that developed test system was effective and practical for the viewpoint of the repeatability of the test mode.