• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.112-119
• /
• 2006

This paper is concerned with the light-weight design of a center-pillar assembly for the high-speed side impact of vehicle using advanced high strength steels(AHSS). Steel industries continuously promote the ULSAB-AVC project for applying AHSS to structural parts as an alternative way to improve the crashworthiness and the fuel efficiency because it has the superior strength compared to the conventional steel. In order to simulate deformation behavior of the center-pillar assembly, a simplified center-pillar model is developed and parts of that are subdivided employing tailor-welded blanks(TWB) in order to control the deformation shape of the center-pillar assembly. The thickness of each part which constitutes the simplified model is selected as a design parameter. Factorial design is carried out aiming at the application and configuration of AHSS to simplified side-impact analysis because it needs tremendous computing time to consider all combinations of parts. In optimization of the center-pillar, S-shaped deformation is targeted to guarantee the reduction of the injury level of a driver dummy in the crash test. The objective function is constructed so as to minimize the weight and lead to S-shape deformation mode. Optimization also includes the weight reduction comparing with the case using conventional steels. The result shows that the AHSS can be utilized effectively for minimization of the vehicle weight and induction of S-shaped deformation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.798-804
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847 mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software Is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the ND spring. And then, the results of the modal testing are compared with those of the FE analysis. The natural frequencies as well as the mode shapes obtained by the experiment have a greater similarity to the results by the contact model than the previous beam-spring model. In audition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed : one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former Finally, the vibration displacements are measured in the range of 0.l12∼0.214 mm for the excitation force of 0.25∼0.75 N.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.127-135
• /
• 2009

Most traffic information that drivers receive while driving are stored in their short-term memory and disappear within a few seconds. Contemporary modeling approaches using a dummy variable can't fully explain this phenomenon. As such, this study proposes to use utility functions of real-time in-vehicle traffic safety information (IVTSI), analyzing its safety impacts based on empirical data from an on-site driving experiment at signalized intersection approach with a limited visibility. For this, a driving stability evaluation model is developed based on driver's driving speed choice, applying an ordered probit model. To estimate the specified utility functions, the model simultaneously accounts for various factors, such as traffic operation, geometry, road environment, and driver's characteristics. The results show three significant facts. First, a normal density function (exponential function) is appropriate to explain the utility of IVTSI proposed under study over time. Second, the IVTSI remains in driver's short-term memory for up to nearly 22 second after provision, decreasing over time. Three, IVTSI provision appears more important than the geometry factor but less than the traffic operation factor.

• Journal of Korea Port Economic Association
• /
• v.30 no.2
• /
• pp.133-143
• /
• 2014

The paper uses a panel gravity model to analyse the determinants of export via Gwangyang port for the period from 2000-2012. The gravity model includes export via Gwangyang port, GDP and population of trading partners, the distances between Korea and its partners, and Korea-ASEAN FTA dummy. Hausman test shows up which one is exactly appropriate between random effect estimation and fixed effect estimation to use panel dataset. It depends on whether or not existence or nonexistence of the correlation between unobserved omitted factors and variables. Fixed effect estimation is suitable for this paper by the rejection of null hypothesis. An Empirical analysis of this paper shows GDP influences positive effects and distance influences negative effects to Gwangyang port trading partners. In addition, the results strongly supported the effects of Korea-ASEAN FTA on the growth of Gwangyang port export.

• Journal of Korea Trade
• /
• v.25 no.3
• /
• pp.48-64
• /
• 2021

Purpose - This study examined the effect of tariff cuts on productivity in Korea's manufacturing industries and the effect of initial productivity level before tariff cuts on productivity improvement after tariff cuts. We also attempted to identify whether import-driven or export-driven factors are more important for productivity improvement, especially in low productivity industries. Design/methodology - Since tariff reduction is a policy decision that can affect cross-industry, its impact is spread across all industries beyond the scope of a single firm through the input and output network of industry structure. Accordingly, we proposed a new method to measure the change in productivity to reflect the impact of tariff cuts across industries. Through an Armington CGE analysis, changes in endogenous variables can be directly measured after the exogenous shock of tariff reduction, and the amount of movements in productivity triggered by tariff cuts can also be calculated. We can thus assess the effectiveness of exogenous policy, such as tariff cuts, through the difference between the benchmark and counterfactual values of endogenous variables. Findings - This study confirmed that tariff reduction positively affected productivity improvement in Korea's manufacturing industries. It also confirmed that productivity gains occur in Korea's leading export industries. Finally, greater productivity gains were recorded in the group with additional high-export-share or high-import-share conditions for low productivity industries. These results are, in a limited sense, consistent with the existing studies that emphasize the importance of exports and imports on productivity improvement, especially for low productivity industries. Originality/value - The results of our experiments are different from those of non-CGE studies, which measure the industry-level change in productivity with dummy coefficients, in terms of directly calculating the amount of change in productivity. In addition, we propose that the Armington CGE model is more appropriate than the Melitz CGE model to directly measure the productivity after tariff cuts. This is because the Melitz CGE model assumes the given specific productivity density, which does not change after an overall drop of tariffs. To the best of our knowledge, this approach to directly calculating productivity by reflecting the impact of tariff reduction across industries through CGE analysis, is unprecedented in this literature.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.6
• /
• pp.111-122
• /
• 2016

Support and efforts are being strengthened at the national level for entrepreneurial activities that are expected to revitalize our economy. Generally, according to the previous studies, it is known that entrepreneurship positively affects economic growth and the reduction of unemployment rate through employment creation. The analysis of the impact of entrepreneurial activities on economic growth and job creation is mainly based on national comparative analysis. In this paper, however, the impact of start-up activities in the Busan metropolitan city on regional economic growth and employment improvement. In this study, the dummy variables were assigned to firms within three years, five years, and ten years after start-up according to the period since the start-up of the firm. As a result of the empirical analysis, the value of dummy variable of the start - up firms was found to be significant in the analysis of the sales growth rate as the dependent variable according to the preceding study by Evans(1987). Therefore, it can be seen that the growth rate of the start - up company is higher than that of the other companies and it is positive for the regional economic growth. In addition, the coefficient of the dummy variable decreases from the enterprise analysis to the latter within three years, five years, and ten years after the start-up, and confirms that the coefficient of the firm's start-up years has a negative value. I could see more clearly. On the other hand, in the analysis of the effect of start-up firms on unemployment rate reduction, the growth rate of regular workers was higher than that of other firms. This suggests that it positively affects the reduction of the unemployment rate in the region. In addition, in the dynamic analysis using the Almon estimation formula and the Koyck model, the effect of log-transformed net start-up firms on the growth rate of new workers is very significant. As a result of the above model, It is reaffirmed that start-up activity has a positive effect on employment growth.

• Journal of Labour Economics
• /
• v.23 no.2
• /
• pp.127-151
• /
• 2000

The empirical study that used the logit model and the Heckman's selection bias model based upon 'Korea Labor & Income Panel Study' shows that the experience of job training has a positive effect on the probability of employment, as well as on the wage increase. The analysis also sheds light on the effect on employment with wage workers who experienced job training. When the discouraged unemployed are not classified as labor force participants, that is the unemployed, and the industrial dummy variables are excluded, logit estimation shows that training program in the public sector, not in the private sector, significantly increases their employment probability. However when these same workers are classified as the unemployed and the industrial dummies are included, logit estimation shows that public and private training programs has no effect on their employability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.905-910
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the fm spring. And then, the result of the FE analysis is compared with that of the modal test. The natural frequencies as well as the mode shapes calculated by the proposed contact models have a greater similarity to the test results than those by the previous beam-spring model. In addition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed; one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former. Finally, the vibration displacements are measured in the range of 0.112-0.214mm for the excitation force of 0.25-0.75 N.

• The Journal of Fisheries Business Administration
• /
• v.44 no.2
• /
• pp.19-33
• /
• 2013

China is the world's largest producer of aquatic products and its fishery sector is comprised primarily of aquaculture facilities, both fresh and seawater, and a much smaller wild catch component. The expansion of the aquaculture sector continues to boost China's aquatic output. The increase is attributable to several factors. Among them rapidly growing domestic demand is no doubt one of the most important reasons. Rapid economic growth and rising disposable income are influencing domestic consumption and the economic recovery of major import markets is further stimulating consumption of China's aquatic products. This paper tries to examine the status, trend and reasons of consumption of aquatic products in China. Based on the analysis on the consumption of aquatic products and its change, this paper utilizes panel regression model to estimate the affecting factors of aquatic products consumption in China. By using panel data between 1997 and 2010, the results indicate that income, urbanization, aging and dummy variable have positive effects and fish price index has negative effect on China's aquatic products consumption as predicted. However, effects of meat consumption and education on fishery consumption are totally opposite with our predictions. In other words, it turns out that meat consumption has positive effect on fish consumption while education turns out to have negative effect. Finally the member of household does not show any significant effect on consumption of aquatic products in China.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.531-542
• /
• 2002

As most of metadata have been handled on restricted applications, we need a same metadata in order to represent a same video data. However, these metadata make problems that the same video data should be supported by the same metadata. Therefore, in this paper, we extend the Dublin core elements to support the metadata which can solve the problems. The proposed video data representation is managed by the extended metadata of Doblin core model, by using the information of structure, content and manipulation of video data. The thirteen temporal relationship operators are reduced to the six temporal relationship operators by using a dummy shot temporal transformation relationship. The reduced six temporal relationship operators through excluding reverse temporal relationship not only maintain a consistency of representation between a metadata and a video data, but also transform n-ary temporal relationship to binary relationship on shots. We show that the proposed metadata model can be applied to representing and retrieving on various applications as equivalent as the same structure.