• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.262-266
• /
• 2002

본 연구에서는 가상환경 및 시뮬레이션에서 활용이 가능한 인체 모델을 개발하였다. 한국인 인체 측정 자료를 바탕으로 각 지체에 대한 기구학적 특성치와 상관관계를 얻고 인체 모델을 구성하였다. 인체 모델은 17개의 독립된 지체들로 구분되며 조인트로 연결된다. 구성된 모델은 가상환경의 신 그래프(scene graph)상에 자료화되고 DCS를 이용하여 애니메이션이 가능하도록 하였다. Madymo를 이용하여 차량 운전자의 전방 충돌 및 범퍼 통과시 지체의 거동을 해석하고 그 결과 값을 변환하여 OpenGL Performer 라이브러리를 통해 가상 공간에 가시화하였다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1137-1142
• /
• 2008

In this paper, an effect on power conversion unit in high-speed railway vehicle by loss of contact between a catenary system and pantograph suppling electrical power to high-speed railway vehicle are investigated. One of the most important needs accompanied by increasing the speed of high-speed railway vehicle is reduced that arc phenomenon by loss of contact brings out EMI. in case of high-speed railway vehicle using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI, dummy signal injection etc usually occur. To analysis the effect on loss of contact, it is necessary electrical modeling system between the contact line and the pantograph according to the loss of contact. Therefore analytical model of a contact line and a pantograph is constructed to simulate the behaviour of loss of contact. The reliability of the modeling system is verified by simulation implementation on kinds of loss of contact.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.161-169
• /
• 2005

Neck injuries sustained during low speed rear impact are the most commonly sustained traffic injury. Therefore, the analysis of neck injury mechanisms and methods for mitigating and reducing neck injuries during low speed rear impact are a very important issue in the vehicle safety field. In order to find a method to absorb the shock that is transmitted to the occupant, the response of frontal and rear dummy due to the motion of the struck vehicle and the rotational angular displacements of dummies' necks during rear impact at 12km/h speed were investigated using a Working Model 2D. The results suggest that the shock absorption system should be equipped in the bottom of the seat of the vehicle to reduce shock and mitigate neck injury to the occupants.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.57-64
• /
• 2011

Vibrations on the floor in a car are transmitted to the foot, hip, and back from the seat. Human body recognizes these vibrations, but the sensitivity for each vibration is different. To evaluate these vibrations, RMS(root mean square) of accelerations, VDV(vibration does value) are commonly used. The ride comfort evaluation is usually carried out by experiments of real cars which are expensive. The purpose of this paper is to briefly review the status of several ride vibration standards and criteria having relevance to construction machinery vehicles and to suggest recommendations for the effective use of such criteria in vehicle / component development.

• Communications for Statistical Applications and Methods
• /
• v.26 no.4
• /
• pp.359-370
• /
• 2019

Grouping structures in covariates are often ignored in regression models. Recent statistical developments considering grouping structure shows clear advantages; however, reflecting the grouping structure on the quantile regression model has been relatively rare in the literature. Treating the grouping structure is usually conducted by employing a group penalty. In this work, we explore the idea of group penalty to the quantile regression models. The grouping structure is assumed to be known, which is commonly true for some cases. For example, group of dummy variables transformed from one categorical variable can be regarded as one group of covariates. We examine the group quantile regression models via two real data analyses and simulation studies that reveal the beneficial performance of group quantile regression models to the non-group version methods if there exists grouping structures among variables.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.3
• /
• pp.701-710
• /
• 2016

The purpose of this paper is to build a model of packet amount of Naver mobile portal. We collected 2004 cases by measuring the sixth per access from September, 2012 to October, 2015. We use regression model with autoregressive errors, in which predictors incorporated into the model were replication, date, time, week, month. It has been found the model which errors follow AR(36), based on AIC and adjusted $R^2$. We found some characteristics from our model as follows. In addition to model building, we also have discussed some meaningful features yielded from the selected model in this paper. Considering the importance of this topic, continuous researches are needed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.84-92
• /
• 2005

This paper is concerned with optimum design of a center-pillar assembly induced by the high-speed side impact of the vehicle. In order to simulate deformation behavior of the center-pillar assembly, simplified finite element model of the center-pillar and a moving deformable barrier are developed based on results of the crash analysis of a full vehicle model. In optimization of the deformation shape of the center-pillar, S-shaped deformation is targeted to guarantee reduction of the injury level of a driver dummy in the crash test. Tailor-welded blanks are adopted in the simplified center-pillar model to control the deformation shape of the center-pillar assembly. The thickness of each part which constitutes the simplified model is selected as a design parameter. The thickness of parts which have significant effect on the deformation mechanism are selected as design parameters with sensitivity analysis based on the design of experiment technique. The objective function is constructed so as to minimize the weight and lead to an S-mode deformation shape. The result shows that the simplified model can be utilized effectively for optimum design of the center-pillar members with remarkable saving of computing time.

• Journal of Information Management
• /
• v.41 no.2
• /
• pp.111-131
• /
• 2010

This paper examines the levels and influence factors on efficiency of public libraries in metropolitan cities. For this purpose, In the first stage, the efficiency score analysis of 129 sample public libraries has been undertaken. In the second stage, the efficiency scores obtained from the first stage are regressed on environmental factors. The result of this study shows that : (1) main source of technical inefficiency is pure technical inefficiency rather than scale inefficiency; (2) it is positive effect environmental factors on the efficiency that the population, the dummy variable of capital area.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1009-1014
• /
• 2007

To improve passenger safety, seatbelt systems with pre-tensioner that tightens seatbelt webbing using explosives just before collision are widely adopted. Even though seatbelt must not be unlatched without passenger's operation, release of a buckle due to explosion of pre-tensioner takes place in some situations resulting in serious injury to passengers. To prevent the unintended unlocking, a pendulum like part called anti-g mass is attached to the buckle to block displacement of release button. In this study, the unlocking conditions of anti-g buckle when pre-tensioner explodes has been theoretically investigated. Through multibody model of the seatbelt system incorporating every detailed part of the buckle, dynamic analysis of the seatbelt system with pre-tensioner has been performed including the driver's body model that interacts with seatbelt system. The simulations results has been validated through actual sled test with driver dummy and the seatbelt system.

• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.11-15
• /
• 2016

FE analyses for weldment of ship structure are required for various reasons such as stress concentration for bead tow, residual stress and distortion after welding, and hydrogen diffusion for prediction of low temperature crack. These analyses should be done by solid element modeling, but most of ship structures are modeled by shell element. If we are able to make solid element in the shell element FE modeling it is easily to solve the requirement for solid elements in weld analysis of large ship structures. As the nodes of solid element cannot take moments from nodes of shell element, these two kinds of element cannot be used in one model by conventional modeling. The PSCM (Perpendicular shell coupling method) can connect shell to solid. This method uses dummy perpendicular shell element for transferring moment from shell to solid. The target of this study is to develop a FE pre-processing system applicable at welding at ship structure by using PSCM. We also suggested glue-contact technique for controlling element numbers and element qualities and applied it between PSCM and solid element in automatic pre-processing system. The FE weldment modeling through developed pre-processing system will have rational stiffness of adjacent regions. Then FE results can be more reliable when turn-over of ship-block with semi-welded state or ECA (Engineering critical assessment) of weldment in a ship-block are analyzed.