• Korean Journal of Health Education and Promotion
• /
• v.14 no.1
• /
• pp.147-160
• /
• 1997

Nowadays according to the complexity of our daily life due to the development of industry and transportation various kinds of injuries happen. Since 1993 the death rate among 5-14 age children by injuries amount to about 57%. Furthermore, the injury of children can give a direct damage to their own family and it can also bring a serious loss to the country as well as the community where they live in accord with degree of an injury. From this reason, the importance of safety education has been increasing. In this study, it is aimed to clarify the effect of injury preventive behaviors on injury incidence of the 6th grade students in the elementary school. This study is accomplished by the survey sampled from 9 elementary schools in seoul, each of which belong to different district. The survey took for 15 days from the date of september 10th 1996 to september 25th 1996 and the results were as follows; 1. For demographic characteristic, sexual distribution was 48.7% of male students and 47.1% of female students. The required time from home to school was 10-19 minutes(51.8%), and the most way of their going to school is to walk(89.7%). Mothers who graduated from high school were 46.6% and 49.4% of fathers were above university graduated level. The most vocation of mothers was housewife as 56.7%. 2. The results of analysis on the injury rates, 75.8% of children experienced more than one injury and the most was play injury. With regards to sites where injuries happened, the room, the kitchen, and the living room in the house ranked first(38.3%) and then injuries at school such as on the playground, in the classroom, and on the stairs was 34.1%. 3. Considering the rate of injury incidence in accordance with demographic characteristics, male students experienced more injuries than female students(p〈0.05). For the way from home to school, children who went to school by bicycle experienced the most injuries and then on foot, by bus in order of which differences were statistically significant(p〈0.05). 4. From the comparison of parents' safety education practice and the injury incidence, the less often parents practice safety education, the more often children experience injuries(p〈0.05). 5. The results of analysis on the effect of injury preventive behaviors on accidents children who didn't act injury preventive behaviors experienced much more injuries than those who did injury preventive behaviors of which differences were statistically significant(p〈0.01). 6. From the results of analysis of factors effecting on the elementary school children's injuries, children without injury preventive behaviors had more effect on accidents than those who had injury preventive behaviors as odds ratio 2.06(p〈0.01), and the odds ratio of male students compared with female students was 1.47(p〈0.05).

• Journal of agricultural medicine and community health
• /
• v.8 no.1
• /
• pp.28-34
• /
• 1983

In spite of the world-wide increase of incidence of pesticide poisoning due to greater use of pesticides, the epidemiological study of pesticide poisoning in Korea has been grossly neglected. The author gained access to the medical records for two year period (1981 through 1982) from local clinics, hospitals and health centers of Kyungpook area to investigate the status of the pesticide poisoning. During these two years, there were 1,618 cases of documented pesticide poisoning, of which in 1981 were 765 and in 1982 were 853. Those in the twenties decade of age was the most frequent and the male(70%) was more liable than the female (30%). In view of manner of poisoning, occupational poisoning was 27.8%, accidental 5.6%, and suicidal 66.6%. There are three distinct groups which make up the large majority of both fatal and nonfatal cases; young children who accidentally ingest pesticides, young to middle age adult who are occupationally poisoned, and middle age to older adults who suicidally ingest pesticides. The seasonal distribution of these poisonings disclosed the peak month to be July, with August next, followed by June and September. Only 11% of cases occurred during the three-month winter season of December to February. Thus pesticide caused poison- ing was primarily a summer and early fall occurrence. During these two years, average of 67 cases of poisoning was observed monthly. Of the pesticide poisoning documented, 49% were treated with poisoning patients from local clinic and 43% from hospital. The case fatality rate of occupational poisoning was 0.9%, accidental 5.6% and suicidal 20.3%. The mean overall case fatality rate was 14.1%. Annual incidence of pesticide poisoning was 25.4 per 100,000 population in the study area. There is a nationwide need for more reliable date on pesticide poisoning. This need can only grow more acute with the passage of time because of the increasing importance of pesticides as a cause of morbidity and mortality.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.177-182
• /
• 2011

The objective of this study was to examine the effect of HACCP implementation on the medicine use, antibiotic utilization in each feeding stage and productivity of large scale swine farms (over 5,000 pigs) in Korea. Data were collected from ten swine farms before and after implementation of a HACCP system. Total number of piglets, number of initial weaning piglets, number of weaning piglets, survival rate of piglets, date of weaning piglets, number of piglets per sow per year and price for medicine used per month on HACCP implemented swine farms had a tendency to increase without any significant difference. However, parturition rate, market pig per sow per year, number of antibiotic used and farm number of feeds containing antibiotics at fattening stage added at the swine farm were significantly increased after HACCP implementation (p<0.05). Due to increase in the feed cost recently, production cost for shipment in HACCP system implemented swine farms had increased in this study. In conclusion, our results indicated that the implementation of HACCP system might have many effects including reduction of medical expenses and improvement of productivity of the pig farms.

• Research in Plant Disease
• /
• v.28 no.3
• /
• pp.143-151
• /
• 2022

In order to investigate the cause of wilting symptoms in red pepper field of Korea, the frequency of occurrence of red peppers showing wilting symptoms was investigated in pepper cultivation fields in Goesan, Chungcheongbuk-do for 5 years from 2010 to 2014. There was a difference in the frequency of wilting symptoms depending on the year of investigation, but the frequency of occurrence increased as the investigation period passed from June and July to August. During this period, Ralstonia solanacearum causing the bacterial wilt was isolated at a rate four times higher than Phytophthora capsica causing the Phytophthora late blight. In wilted peppers collected in Goesan of Chungbuk and Andong of Gyeongbuk in 2013 and 2014, R. solanacearum and P. capsici were isolated from 20.3% and 3.8% of the total fields, respectively. In the year with a high rate of wilting symptoms, the average temperature was high, and the disease occurrence date of the bacterial wilt, estimated with disease forecasting model, was also fast. The inconsistency between the number of days at risk of Phytophthora late blight and the frequency of occurrence of wither symptoms is thought to be due to the generalization of the use of cultivars resistant to the Phytophthora late blight in the pepper field. In our study, the wilting symptoms were caused by the bacterial wilt caused by R. solanacearum rather than the Phytophthora late blight caused by P. capsica, which is possibly caused by increasing cultivation of pepper varieties resistant to the Phytophthora late blight in the field.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.283-291
• /
• 2010

In this review, the studies on the electrochemical properties of $TiO_2$ nanotube as an anode material of lithium-ion battery, which was prepared by an alkaline hydrothermal reaction and anneling process, were investigated andanalyzed in terms of charge-dischage characteristics. Up to date, a maximum discharge capacity of $338mAh\;g^{-1}$(x=1.01) was achieved by the nanotube with $TiO_2(B)$ phase, whereas the theoretical capacity of $TiO_2$ anode was $335mAh\;g^{-1}$(x=1) in the basis of $Li_xTiO_2$ as a product of electrochemical reaction between $TiO_2$ and lithium. This was due to fast lithium transport by a shortened diffusion path provided by controlling the nanostructure of $TiO_2$, because the self-diffusion of lithium was slow in a basis of its activation energy as 0.48 eV. Due to an excellent ion storage capabilities in both the surface and the bulk phase, the $TiO_2$ nanotube could be a promising active material as both an anode of lithium-ion battery and an electrode of capacitor with high-rate performances.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.553-581
• /
• 2022

Shortly after tunnel boring machine (TBM) was introduced in the tunneling industry, the use of TBM has surprisingly increased worldwide due to its performance together with the benefit of being safely and environmentally friendly. One of the main cost items in the TBM tunneling in rock and soil is changing damaged or worn cutters. It is because that the cutter change is a time-consuming and costly activity that can significantly reduce the TBM utilization and advance rate and has a major effect on the total time and cost of TBM tunneling projects. Therefore, the importance of accurately evaluating the cutter life can never be overemphasized. However, the prediction of cutter wear in soil, rock including mixed face is very complex and not yet fully clarified, subsequently keeping engineers busy around the world. Various prediction models for cutter wear have been developed and introduced, but these models almost usually produce highly variable results due to inherent uncertainties in the models. In this study, a case study of design and construction of disc cutter change is introduced and analyzed, rather than proposing a prediction model of cutter wear. As the disc cutter is strongly affected by the geological condition, TBM machine characteristic and operation, authors believe it is very hard to suggest a generalized prediction model given the uncertainties and limitations therefore it would be more practical to analyze a real case and provide a detailed discussion of the difference between prediction and result for the cutter change. By doing so, up-to-date idea about planning and execution of cutter change in practice can be promoted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.1
• /
• pp.55-65
• /
• 1999

There have been many reports to date regarding the role of GnRH as a local regulatory factor of ovarian function as studies of human and rat ovaries revealed GnRH and its receptor. In recent studies it has been shown that GnRH directly causes apoptosis in the granulosa cells of the rat ovary, and such results leads to the suggestion that the use of GnRH agonist for more stable long term ovarian hyperstimulation in human IVF-ET programs causes granulosa cell apoptosis which may lead to follicular atresia. Therefore this study attempts to determine if granulosa-luteal cell apoptosis occurs in patients during IVF-ET programs in which GnRH agonist is employed for ovarian hyperstimulation. The quality of oocyte-cumulus complexes obtained during ovum pickup procedures were assessed morphologically and then the fertilization rate and developmental rate was determined. Apoptotic cells among the granulosa-luteal cells obtained during the same procedure were observed after staining with Hematoxylin-eosin. The fragmentation degree of DNA extracted from granulosa-luteal cells was determined and comparatively analyzed. There was no difference in the average age of the patients, the number of oocytes retrieved, and fertilization and developmental rates between the FSH/hMG group and GnRH-long group. There was also no difference in the apoptosis rate and pyknosis rate in the granulosa-luteal cells between the two groups. However, when the oocyte-cumulus complexes were morphoogically divided into the healthy group and atretic group without regard for the method of hyperstimulation, the results showed that the number of oocytes obtained averaged $11.09{\pm}8.75\;and\;10.33{\pm}4.53$ per cycle, respectively, showing no significant difference, but the fertilization rate (77.05%, 56.99%, respectively, p<0.01) and developmental rate (65.96%, 41.51%, respectively, p<0.01) was significantly increased in the healthy group when compared to the atretic group. The degree of apoptosis in the granulosa-luteal cells showed that in the healthy group it was 2.25% which was not significantly different from the atretic group (2.77%), but the pyknosis rate in the atretic group (27.81%) was significantly higher compared to the healthy group (11.35%, p<0.01). The quantity of DNA fragmentation in the FSH/hMG group was 32.22%, while in the GnRH-long group it was 34.27%, showing no significant difference. On the other hand the degree of DNA fragmentation was 39.05% and 11.83% in the healthy group and atretic group, respectively, showing significantly higher increase in the atretic group (p<0.01). The above results suggest that death of granulosa-luteal cells according to the state of the oocyte-cumulus complex is more related to pyknosis rather than apoptosis. Also, the GnRH agonist used in ovarian hyperstimulation does not seem to directly affect the apoptosis of retrieved oocytes and granulosa-luteal cells, and which is thought to be due to the suppression of the apoptogenic effect of GnRH agonist as a result of the high doses of FSH administered.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.1-15
• /
• 1989

The seventeen barnyardgrass [Echinochloa crus-galli (L.) Beauv.] accessions, which were collected national-widely in 1986 and selected two times through 1987, were experimented at 1988. To identify the ecological properties of the collected accessions of native barnyardgrass species as a weed, the experiment was conducted with Wagner pots in size of I/500a and under PE film house. 1. Accessions were classified into 5 specific groups in plant type properties by use of data from plant height, number of maximum tillers, erectness, culm length and panicle type, among others. 2. As for species identification, they were clustered into 3 similar groups and 2 individual species by use of data from color, first-glumer type, and erectness. 3. Four groups were identified for elongational properties by plant height of 22 days old seedling, length of culm, panical, leaf length and width, and inter-node and spikelet, among others. 4. Properties on quanititative growth were classified into 4 groups and 1 individual accession corresponding to differential plant height of 22 days old seedling, length of culm, panical, inter-node, leaf-sheath, spikelet, first-glumes length, grain, number of tillers, spike, and grain weight. 5. Due to different daily increasing rate in seedling height, dry weight, number of tillers and ratio in dry weight to plant height, the growth rate properties were clustered into 4 groups and one individual accession. 6. Properties on seedling growth were classified into 4 groups by use of differential date in length and width of first-leaf, plant height, number of tillers, and dry weight of young and medium aged seedling. 7. Responding to heading date, the accessions were classified into 3 groups : temperative sensitive, medium, and short-day length sensitive types, respectively. 8. By integrating of all quanititative and attributable characters, the seventeen accessions were clustered into 4 groups and 2 individual accessions.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1757-1766
• /
• 2021

The green coverage ratio is the ratio of the land area to green coverage area, and it is used as a practical urban greening index. The green coverage ratio is calculated based on the land cover map, but low spatial resolution and inconsistent production cycle of land cover map make it difficult to calculate the correct green coverage area and analyze the precise green coverage. Therefore, this study proposes a new method to calculate green coverage area using aerial images and deep neural networks. Green coverage ratio can be quickly calculated using manned aerial images acquired by local governments, but precise analysis is difficult because components of image such as acquisition date, resolution, and sensors cannot be selected and modified. This limitation can be supplemented by using an unmanned aerial vehicle that can mount various sensors and acquire high-resolution images due to low-altitude flight. In this study, we proposed a method to calculate green coverage ratio from manned or unmanned aerial images, and experimentally verified the proposed method. Aerial images enable precise analysis by high resolution and relatively constant cycles, and deep learning can automatically detect green coverage area in aerial images. Local governments acquire manned aerial images for various purposes every year and we can utilize them to calculate green coverage ratio quickly. However, acquired manned aerial images may be difficult to accurately analyze because details such as acquisition date, resolution, and sensors cannot be selected. These limitations can be supplemented by using unmanned aerial vehicles that can mount various sensors and acquire high-resolution images due to low-altitude flight. Accordingly, the green coverage ratio was calculated from the two aerial images, and as a result, it could be calculated with high accuracy from all green types. However, the green coverage ratio calculated from manned aerial images had limitations in complex environments. The unmanned aerial images used to compensate for this were able to calculate a high accuracy of green coverage ratio even in complex environments, and more precise green area detection was possible through additional band images. In the future, it is expected that the rust rate can be calculated effectively by using the newly acquired unmanned aerial imagery supplementary to the existing manned aerial imagery.