• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.623-624
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.400-403
• /
• 2002

This paper presents a shearographic technique for measuring in-plane strains. During the measurement, the test object is illuminated alternately with two laser beams, symmetrically with respect to the viewing direction. Employing a phase shift technique, the phase distributions due to object deformation for each beam are obtained separately. The difference of the two phase distributions depicts the derivative of in-plane surface displacements. The technique is equivalent to a system of many strain gages.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.251-254
• /
• 2003

In recent years, shearogrpahy has significantly improved capabilities In the areas of unbend and separation detection in tires. Although shearography has many advantages fur qualitative evaluation, the technique remains the problem of quantitative analysis of inside defects, because shearography needs several effective factors including the amount of shearing, shearine direction and induced load, which exist as barrier for the quantitative analysis of inside defects. Since the factors are highly dependent on inspectors skill and also affect the in-situ workability. The factors were optimized and the size of cracks inside of pipeline and tire has been quantitatively determined.

• 한국광학회지
• /
• 제16권3호
• /
• pp.239-247
• /
• 2005

본 연구에서는 물체의 내부 결함 측정을 위해서 레이저 스페클에 바탕을 둔 dual-beam shearography 기술을 이용하였다. 층 밀림을 만들기 위해서는 여러 가지 간섭계 중에서 마이켈슨 층 밀림 간섭계를 사용하였다. 열전도도가 낮은 아크릴 판 내부에 인위적인 결함을 만들어서 시료로 사용하였다. 시료에 레이저 beam을 조사하여 산란된 빛을 마이켈슨 층 밀림 간섭계를 통하여 스페클 간섭무의를 얻었으며, 위상이동기술을 통하여 위상도를 얻었다. 단일 beam을 시료에 조사할 경우, 물체의 변형의 in-plane과 out-of-plane 성분이 혼합된 상태로 측정되기 때문에 결함에 대한 정확한 분석이 불가능하다. 따라서 두 성분을 분리하기 위해서 dual-beam shearography 기술을 도입하였다. 내부 결함이 있는 시료에 이중 beam을 조사하여 변형 전의 간섭 스페클을 얻고, 약간의 전기 열을 가하여 미세한 변형을 가한 후의 간섭스페클을 얻은 후 의 위상도를 얻은 후 LS filtering과 unwrapping 처리를 통하여 내부 결함 부위를 쉽게 알아볼 수 있도록 하였을 뿐 아니라, 외력에 의한 물체의 미세 변형에 따른 결함 부위에서의 in-plane과 out-of-plane 변형성분의 위상도와 대략적인 변형 정도를 알아낼 수 있었다. 전기 열에 의한 내부결함이 있는 아크릴 판의 변형은 주로 z 방향(out-of-plane)으로 일어났으며 이것은 낮은 열전도도 때문이라는 예측과 잘 일치하였다.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.55-61
• /
• 2009

The wall thinning defect of nuclear power pipe is mainly occurred by the affect of the flow accelerated corrosion (FAC) of fluid. This type of defect becomes the cause of damage or destruction of in carbon steel pipes. Therefore, it is very important to measure defect which is existed not only on the welding part but also on the whole field of pipe. This study use dual-beam Shearography, which can measure the out-of-plane deformation and the in-plane deformation by using another illuminated laser beam and simple image processing technique. And this study proposes Infrared thermography, which is a two-dimensional non-contact nondestructive evaluation that can detect internal defects from the thermal distribution by the inspection of infrared light radiated from the object surface. In this paper, defect of nuclear power pipe were, measured using dual-beam shearography and infrared thermography, quantitatively evaluated by the analysis of phase map and thermal image pattern.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.39-48
• /
• 2021

In this paper, an in-plane deformation measuring system using a dual-beam shear interferometer was constructed to measure the in-plane deformation of the measuring object. The in-plane deformation of the object was quantitatively measured according to the load and surface treatment conditions of the object. We also verified the reliability of the proposed technique by simultaneously performing the technique with an electronic speckle pattern interferometry system (ESPI), which is another laser application measurement technology. Digital shearography directly measures the deformation gradient or strain components and has the advantages of being full-field, noncontact, highly sensitive, and robust. It offers a much higher measurement sensitivity compared with noncoherent measurement methods and is more robust and applicable to in-field tests.