• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.561-565
• /
• 2014

Thermoelectric materials have been the topic of intensive research due to their unique dual capability of directly converting heat into electricity or electrical power into cooling or heating. Bismuth telluride ($Bi_2Te_3$) is the best-known commercially used thermoelectric material in the bulk form for cooling and power generation applications In this work we focus on the large scale synthesis of nanostructured undoped bulk nanostructured $Bi_2Te_3$ materials by employing a novel bottom-up solution-based chemical approach. Spark plasma sintering has been employed for compaction and sintering of $Bi_2Te_3$ nanopowders, resulting in relative density of $g{\cdot}cm^{-3}$ while preserving the nanostructure. The average grain size of the final compacts was obtained as 200 nm after sintering. An improved NS bulk undoped $Bi_2Te_3$ is achieved with sintered at $400^{\circ}C$ for 4 min holding time.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.155-160
• /
• 2003

본 논문에서는 동공 검출을 이용한 얼굴 검출 방법을 제안하고자 한다. 동공검출기는 눈의 역반사 특성을 이용한 능동적 조명을 사용하여 검출을 용이하도록 하였고. 제안된 방법의 검출 범위는 소형컴퓨터나 무인정보 단말기 등의 활용에 적합하도록 하였다. 동공 후보 영역을 계산하여 검출한 후, 학습 규칙을 사용하여 얼굴에 대응하는 두 개의 지점을 선택하도록 하였다. 얼굴 검출 성능을 증명하기 위하여, 얼굴의 최대 돌출 부위를 지정 할 수 있는 이중 모드의 얼굴 추적 장치를 개발하였다. 추정치와 복합 얼굴 검출기의 측정치를 결합하여 특징 관계를 추적함으로 처리의 안정성을 높였으며 또한, 실시간으로 서보의 제어 장치를 원격 조정하여 항상 카메라가 이미지의 중앙을 추적하도록 함으로서 얼굴의 위치를 추정할 수 있도록 하였다.

• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.481-486
• /
• 2010

ENIG (electroless Ni immersion gold) is one of surface finishing which has been most widely used in fine pitch SMT (surface mount technology) and BGA (ball grid array) packaging process. The reliability for package bondability is mainly affected by interfacial reaction between solder and surface finishing. Since the behavior of IMC (intermetallic compound), or the interfacial reaction between Ni and solder, affects to some product reliabilities such as solderability and bondability, understanding behavior of IMC should be important issue. Thus, we studied the properties of ENIG with P contents (9 wt% and 13 wt%), where the P contents is one of main factors in formation of IMC layer. The effect of P content was discussed using the results obtained from FE-SEM(field-emission scanning electron microscope), EPMA(electron probe micro analyzer), EDS(energy dispersive spectroscopy) and Dual-FIB(focused ion beam). Especially, we observed needle type irregular IMC layer with decreasing Ni contents under high P contents (13 wt%). Also, we found how IMC layer affects to bondability with forming continuous Kirkendall voids and thick P-rich layer.

• 수산해양기술연구
• /
• 제53권1호
• /
• pp.77-88
• /
• 2017

The concern on the greenhouse gas emissions is increasing globally. Especially, the greenhouse gas emission from fisheries is an important issue due to Cancun Agreements Mexico in 1992 and the Kyoto protocol in 2005. Furthermore, the Korean government has a plan to reduce the GHG emissions as 5.2% compared to the BAU in fisheries until 2020. However, the investigation on the GHG emissions from Korean fisheries has not been executed much. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is needed as the first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from the major coastal fisheries such as coastal gillnet fishery, coastal dual purpose fishery, coastal pots fishery and coastal small scale stow net fishery. Here, we calculated the GHG emission from the fisheries using the LCA (Life Cycle Assessment) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficients of the fisheries are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for the unit weight of fishes are also calculated with consideration to the different consuming areas. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries.

• 한국콘텐츠학회논문지
• /
• 제14권2호
• /
• pp.172-180
• /
• 2014

본 연구는 문화산업전문회사제도가 지상파방송의 드라마제작에 미친 영향이 무엇인지를 검토하는데 주목적이 있다. 구체적인 연구 문제는 다음과 같다. 첫째, 지상파방송사가 드라마제작에 문전사제도를 적극적으로 도입하게 된 이유는 무엇인가? 둘째, 지상파방송사의 문전사 설립 및 운영 과정에서의 특징은 무엇인가? 셋째, 문전사제도가 지상파방송의 드라마제작시스템에 미친 영향은 무엇인가? 본 연구는 KBS가 문전사를 활용해 제작한 <학교2013>를 분석사례로 선정하였다. 연구 결과 첫째, 지상파방송사는 막대한 제작비를 조달하고 투명하고 효율적으로 관리하기 위해 새로운 문전사 제도를 적극 도입하였다. 둘째, 지상파방송사 문전사(KGCS문전사)의 특징은 모태펀드와 프로젝트 펀드로 나누어진 이중 구조로 설계되어 있다는 것이다. 셋째, 문전사가 지상파방송의 드라마제작에 미친 영향으로는 (1)외부 투자 유치 활성화, (2)제작비 운영의 투명성, (3)자체 기획 활성화, (4)콘텐츠의 안정적 확보, 그리고 (5)수익 다각화 등이었다.

• 한국미생물·생명공학회지
• /
• 제46권3호
• /
• pp.244-252
• /
• 2018

Protein disulfide isomerase A3 (PDIA3) is a major member of the protein disulfide isomerase (PDI) family. PDI proteins commonly reside in the endoplasmic reticulum and mediate important thiol-disulfide interchanges during post-translational protein folding. Unlike other PDI family members, PDIA3 is ubiquitous in various organ systems. However, its physiological activity varies in other tissues. PDIA3 has been associated with cancer, airway inflammation, neurodegenerative diseases, and metabolic diseases. However, the mechanisms of the association of PDIA3 with these pathological conditions remain unclear. Recombinant PDIA3 (rPDIA3) is needed to clarify the interactions between PDIA3 and certain physiological phenomena. In the present study, we aimed to produce highly purified rPDIA3 for use in pathological experiments. We expressed rPDIA3 with a histidine-enriched elongated peptide tag in Escherichia coli and obtained rPDIA3 at 97.8% purity using consecutive His-tag and reverse-phase chromatography. Elongated peptide tags screened from artificially designated library had dual functions for protein expression and simple purification.

• 한국콘텐츠학회논문지
• /
• 제7권9호
• /
• pp.156-166
• /
• 2007

기존의 재무적 성과 측정 방법은 IT 투자의 가시적 효과를 설명할 수 없기 때문에 IT 투자 성과를 산정하는데 만족스러운 결과를 보여주지 못하고 있다. 정보시스템 분야에서 IT 성과를 산정하기 위한 보다 더 포괄적이고 비 재무적 방법에 대한 요구가 커지고 있다. 본 연구는 가치 사슬 내의 본원적 활동들에 미치는 IT 효과를 평가하기 위해서 프로세스 중심의 효과 측정 방법을 개발하였다. 본 연구에서 제안한 방법은 IT에 대한 기업 목표와 전략적 조정을 IT 효과 측정의 핵심 측정 변수로 사용하였다. 국내의 137개 기업의 경영진들로부터 수집된 데이터를 통해 IT에 대한 기업 목표에 따라 4 개의 그룹으로 분류할 수 있었다: 무 집중, 운영 집중, 시장 집중, 이중 집중. 실증 분석을 통해 보다 더 집중된 기업의 경영진이 IT투자에 대해서 보다 더 높은 성과를 지각하고 있다는 것을 입증할 수 있었으며, 이는 IT에 대한 기업 목표가 IT 투자 효과의 유용한 지표임을 의미한다. 본 연구는 또한 전략적 조정이 IT 투자 효과를 지각하는데 있어서 긍정적으로 영향을 미치고 있음을 보여주고 있다.

• Journal of Korean Neurosurgical Society
• /
• 제55권6호
• /
• pp.337-342
• /
• 2014

Objective : To determine deformity correction by postural correction and subsequent balloon inflation in acute vertebral compression fractures (OVCFs) and to examine the effect of bone mineral density on deformity correction. Methods : A totol of 50 acute OVCFs received balloon kyphoplasty. Lateral radiographs were taken and analyzed at five different time points : 1) preoperative, 2) after placing the patient in prone hyperextended position, 3) after balloon inflation, 4) after deposition of the cement, and 5) postoperative. All fractures were analyzed for height restoration of anterior (Ha), middle (Hm) and posterior (Hp) vertebra as well as Cobb angle and Kyphotic angle. The bone mineral density (BMD) of lumbar spine was measured by dual-energy X-ray absorptiometry. According to the T-score, the patients were divided into two groups which were osteoporosis group and osteopenia group. Results : Postoperative measurements of Ha, Hm and the Cobb angle demonstrated significant reduction of 4.62 mm, 3.66 mm and $5.34^{\circ}$ compared with the preoperative measurements, respectively (each p<0.05). Postural correction significantly increased Ha by 5.51 mm, Hm by 4.35 mm and improved the Cobb angle by $8.32^{\circ}$ (each p<0.05). Balloon inflation did not demonstrate a significant improvement of Ha, Hm or the Cobb angle compared with baseline prone hyperextended. Postural correction led to greater improvements of Ha, Hm and Cobb angle in osteoporosis group than osteopenia group (each p<0.05). Conclusion : In acute OVCFs, the height restoration was mainly attributed to postural correction rather than deformity correction by balloon inflation. BMD affected deformity correction in the process of postural correction.