• Electronics and Telecommunications Trends
• /
• v.13 no.5 s.53
• /
• pp.53-64
• /
• 1998

본 고에서는 한파장 폐루프 공진기의 기본특성과 이를 활용한 이중모드 필터 구조 및 필터의 주요특징을 기술하였다. 또한 독립적인 직교공진모드를 이용한 폐루프 공진기의 특성과 공진기의 크기를 소형화 하는 기법 및 소형화 된 공진기의 공진조건 등을 기술하였고, 소형화 된 공진기를 이용한 듀플렉서의 응용 예 등에 대해 기술하였다. 폐루프 공진기를 이용한 이중모드필터 등은 마이크로 스트립 형태로 구현이 가능하기 때문에 MIC 또는 MMIC 등에 적합한 구조이며, 능동소자 등의 삽입이 가능하기 때문에 능동필터, VCO, 튜닝필터 등의 구현이 가능하고 소형의 듀플렉서 설계가 가능하기 때문에 향후 마이크로파 부품분야에서 기대되는 부품이라 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1778-1780
• /
• 1996

In this paper, we describe the partial discharge measurement with measuring impedance to have two wide frequency band transformers(filters) in the oil-paper and air insulation. The measuring impedance consists of high and low limiting frequency transformers. This measuring impedance could be measured the partial discharge current wave. We have the results that the amplitude partial discharge pulse ratio of low limiting frequency tranformer to high limiting frequency one is varied in the condition(in oil-paper insulation and air) to generate partial discharge.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.427-432
• /
• 2012

In this paper, we have designed and fabricated 7-bands (GSM 850/900, DCS/PCS, and UMTS 3 bands) LTCC front end module (FEM) embedded LPF (low pass filter) to efficiently eliminate harmonics generated in TX path. The proposed FEM is composed of flip-chip typed CMOS SP9T switch to select transceiver signals, dual type SAW filters to receive Rx signals, and 0603 size chip components for the antenna matching and ESD protection. The whole size of FEM is $4.5{\times}3.2{\times}1.2mm^3$. The insertion loss of Tx and Rx ports are measured at 1.7 dB and 4.8 dB, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.227-232
• /
• 2014

A highly efficient MOSFET inverter for single-phase grid-connected photovoltaic power generation systems is presented in this paper. It is a full-MOSFET version of the conventional transformerless full-bridge inverter with dual L-C filters using unipolar PWM. The key idea lies on smart pre switching(SPS), which can make the large switching loss due to a poor reverse recovery of the MOSFET's body diode reduced dramatically. The validity of the proposed inverter is verified by experiment.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.14-18
• /
• 2000

We have investigated gain flattening of EDFA systems with or without a gain equalizer for WDM long-haul transmission using a re-circulating EDFA loop. Without a gain equalizer, gain variation as small as 2.9 dB was achieved over the 10-nm band of a 100 cascaded EDFA system by the inversion principle. With a gain equalizer based on all-fiber acousto-optic tunable filters, two different config-urations of EDFAs were tested. For a single-stage EDFA scheme, the 21-nm band has shown 3.8 dB of gain variation at 17.4 ∼ 20.3 dB of OSNRs after the 100the stage of EDFAs. For a dual-stage EDFA scheme, a wider bandwidth of 34 nm has shown 3.6-dB variation after 40 cascaded EDFAs.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.101-115
• /
• 2018

This study was carried out to evaluate the effects of various filter conditions on unconfined aquifer (alluvial aquifer). We made model test device which has filter layer, pumping well and observation well which consist of sand layer and gravel layer to test. Step drawdown test and long term pumping tests were carried out using the device. The permeability characteristics of each test group were confirmed and the optimal yield was calculated. As a result of comparing the optimal yield of double filter and single filter in sand, dual-filter SD-300 was valued at 216.8 % higher final optimal yield than single-filter SS-300. Comparing the dual filter SD-300 and the single filter SS-100 with a thin filter layer, dual-filter SD-300 was valued at 709.2% higher final optimal yield than single-filter SS-300. As a result of analysis of optimal yield change over time, It was confirmed that the ratio of optimal yield of single filter and dual filter increase over time. In order to evaluate the long-term change in water intake efficiency, we considered the point at which the initial optimal yield was reduced by 50%. The dual filter SD-300 is about 351.1% higher than SS-300, which is the same thickness filter, and about 579.0% higher than SS-100. From these results, Assuming that the point at which the initial quantity of water intake is reduced to 50% is the well life, double filters are expected to increase their lifespan by about 3.5 times over single filters of the same thickness and by about 5.8 times over typical single filter. These results can be used to design wells to river bank filtration or filtered seawater. In addition, it is possible to clarify the effect of the double filter through the comparison with the future field test results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.506-512
• /
• 2003

An output multiplexer of manifold type is widely used in a recent satellite transponder f3r its mass and volume reduction. For correct operation, the filter of such a multiplexer must be singly terminated. In this paper, a simple synthesis method of a 6-pole dual-mode singly terminated filter is described. From the transfer function of the filter, network parameters such as in/output terminations and coupling matrix are obtained with the aid of orthogonal projection and plane rotation. The rotation order, pivot, and rotation angle of the plane rotation process are given for easy filter synthesis. Two different-structure filters are taken into consideration and the network parameters of each filter have been obtained from the same transfer function. The method described in this paper can be applied to the other degree singly terminated filter.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.115-123
• /
• 1998

The semi-volatile fraction of cigarette mainstream smoke contains the most important aroma and taste that enhance smoke flavor. The components in mainstream smoke were analysed for commercially available cigarettes. To compare the semi-volatile components delivered from mainstream smoke of domestic cigarette with imported cigarette, we analyzed three types of filter cigarettes such as cellulose acetate mono filter, carbon dual filter and slim filter cigarette. Mainstream smoke was collected with a combination of Cambridge filter pad and liquid trap containing a small amount of acetone cooled by dry ice-methanol. We have identified 43 components from mainstream smoke by GC and GC/MS and found that benzene, toluene, 4-hydroxy-4-methyl-2-pentanone, 5-methyl-2-furaldehyde, acetic acids nicotine and triacetin were the main peaks in mainstream smoke. Also we have compared the relative amounts of semi-volatile compounds delivered from the domestic and imported cigarettes with three different filters. From the results of this study, the relative amounts of limonene, acetic acid, 5-methyl-Lfuraldehyde delivered from the imported cigarettes were generally higher than those of the domestic one's.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1813-1820
• /
• 2016

Dual-mode photovoltaic power system should be capable of operating in grid-connected (GC) and stand-alone (SA) modes for distributed generation. Under different working modes, the optimal parameters of inverter output filters vary. Inverters commonly operate in GC mode, and thus, a small capacitance is beneficial to the GC topology for achieving a reasonable compromise. A predictive current control scheme is proposed to control the grid current in GC mode and thereby obtain high-performance power. As filter are not optimal under SA mode, a compound control strategy consisting of predictive current control, instantaneous voltage control, and repetitive control is proposed to achieve low total harmonic distortion and improve the output voltage spectrum. The seamless transfer between GC mode and SA mode is illustrated in detail. Finally, the simulation and experimental results of a 4 kVA prototype demonstrate the effectiveness of the proposed control strategy.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.141-149
• /
• 2010

It is essential to find oscillating angles and periods in a seaway when designing and manufacturing stabilizers. It is difficult to find oscillating angles and periods in high speed turning and they vary with ship speed and wave heading angles, therefore, proper algorithm to measure oscillating periods in a seaway. In the present study, three kinds of algorithms are developed to measure oscillating angles periods in a seaway. Dual axis tilt sensor of low price is used to measure oscillating angles, and the effect of lateral accelerations on tilt sensor have been reduced by the fusion algorithm using the gyro sensor signals. Analog and digital filters are applied to minimize the noise of the signals. Three kinds of algorithms, zero crossing, peak to peak and moving zero crossing algorithm, are developed to measure oscillating periods in a seaway. It is found that the moving zero algorithm showed the best results in the sea trials.