• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1961-1971
• /
• 2006

A soft recovery system (SRS) is a device that stops a high speed projectile without damaging the projectile. The SRS is necessary to verify the shock resistant requirements of microelectronics and electro-optic sensors in smart munitions, where the projectiles experience over 20,000 g acceleration inside the barrel. In this study, a computer code for the performance evaluation of a SRS based on ballistic compression decelerator concept has been developed. It consists of a time accurate compressible one-dimensional Euler code with use of deforming grid and a projectile motion analysis code. The Euler code employs Roe's approximate Riemann solver with a total variation diminishing (TVD) method. A fully implicit dual time stepping method is used to advance the solution in time. In addition, the geometric conservation law (GCL) is applied to predict the solutions accurately on the deforming mesh. The equation of motion for the projectile is solved with the four-stage Runge-Kutta time integration method. A small scale SRS to catch a 20 mm bullet fired at 500 m/s within 1,600 g-limit has been designed with the proposed method.

• 한국항공우주학회지
• /
• 제49권11호
• /
• pp.909-917
• /
• 2021

본 연구에서는 스크램제트 제어모델 정립을 위한 1차원 연소기 해석 솔버가 구축되었다. 유체에 대한 지배방정식 및 아레니우스 식 기반의 연소모델, 연료분사모델이 솔버 내에 구현되었으며, 해석이 수행되었다. 솔버의 검증을 위하여 0차원 점화지연 문제 및 1차원 스크램제트 연소해석 문제가 도입되었으며, 현 솔버가 선행 문헌의 결과들을 성공적으로 재현해 내고 있음을 확인하였다. 이어서 아음속 조건에서의 해석을 위한 램제트 해석 알고리즘이 구축되었으며, 열질식 위치를 통해 램제트 조건에서 연소기 입구 마하수를 확정하는 해석이 수행되었다. 램조건에서 PCST (precombustion shock train) 해석을 위한 모델이 도입되었으며, 천이구간 해석을 위한 알고리즘이 도입되었다. 또한 코드 내 램모드 해석의 적절성을 판단하기 위해 격리부 내 의사충격파 길이를 통해 불시동 발생 여부가 분석되었다.

• 한국전산유체공학회지
• /
• 제13권2호
• /
• pp.27-41
• /
• 2008

An unstructured hybrid mesh flow solver has been developed for the simulation of three-dimensional steady and unsteady incompressible flow fields. The incompressible Navier-Stokes equations with an artificial compressibility method were discretized by using a node-based finite-volume method. For the unsteady time-accurate computation, a dual-time stepping method was adopted to satisfy a divergence-free flow field at each physical time step. An implicit time integration method with local time stepping was implemented to accelerate the convergence in the pseudo-time sub-iteration procedure. The one-equation Spalart-Allmaras turbulence model has been adopted to solve high-Reynolds number flow fields. The flow solver was parallelized to minimize the CPU time and to overcome the computational overhead. This method has been applied to calculate steady and unsteady flow fields around submarine configurations and a 3-D infinite cylinder. Validations were made by comparing the predicted results with those of experiments or other numerical results. It was demonstrated that the present method is efficient and robust for the prediction of steady and unsteady incompressible flow fields.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.69-78
• /
• 2009

Cavitating flow simulation is of practical importance for many hydraulic engineering systems, such as pump, turbine, nozzle, injector, etc. In the present work, a solver for cavitating flow has been developed and applied to simulate the flows past axisymmetric cylinders. Governing equations are the two-phase Navier-Stokes equations, comprised of continuity equation of liquid and vapor phase. The momentum equation is in the mixture phase. The solver employed an implicit, dual time, preconditioned algorithm in curvilinear coordinates. Computations were carried out for three axisymmetric cylinders: hemispherical, ogive, and caliber-0 forebody shape. Then, the present calculations were compared with experiments and other numerical results to validate the present solver. Also, the code has shown its capability to accurately simulate the re-entrant jet phenomena and ventilated cavitation. Hence, it has been found that the present numerical code has successfully accounted for cavitating flows past axisymmetric cylinders.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.677-690
• /
• 2022

Actuator disk method 기반의 유동 해석자를 이용하여 수직 이착륙 복합형 비행체 중 하나인 이중 덕트 팬 항공기에 대한 공력해석을 수행하고 관련 지면 효과를 분석하였다. 회전 격자 기법을 이용한 해석결과와의 비교를 통해, 지면 효과 분석을 위한 해석자의 특성과 정확도를 함께 평가하였다. 지면과의 거리에 따른 공력 성능과 유동장 특성을 분석하였다. 지면과의 거리가 가까울수록 팬 추력은 증가하지만, 덕트, 동체, 날개의 수직력 감소로 인한 총 수직력 및 제자리 비행 효율의 저하를 확인하였다. 동체 하부의 유동장 분석으로부터 팬 후류와 지면 간의 상호작용에 의해 발생하는 지면 와류와 분수 유동을 확인하고, 이들이 비행체 공력 성능에 미치는 영향을 분석하였다. 속도 프로파일 비교/검토를 통해 비행체로부터의 거리와 방향에 따른 기체 주변 아웃워시의 강도와 특성을 분석하였다. 또한 콜렉티브 피치각에 따른 지면 효과의 영향을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.289-292
• /
• 2008

Highly over-expanded nozzle of the rocket engines will be excited by non-axial forces due to flow separation at sea level operations. Since rocket engines are designed to produce axial thrust to power the vehicle, non-axial static and/or dynamic forces are not desirable. Several engine failures were attributed to the side loads. Present work investigate the unsteady flow in an over-expanded rocket nozzle in order to estimate side load during a shutdown/starting. Numerical computations has been carried out with density based solver on multi-block structured grid. Present solver is explicit in time and unsteady time step is calculated using dual time step approach. AUSMDV is considered as a numerical scheme for the flux calculations. One equation Spalart-Allmaras turbulence model is selected. Results presented here is for two nozzle pressure ratio i.e. 100 and 20. At 100 NPR, restricted shock separation (RSS) pattern is observed while, 20 NPR shows free shock separation (FSS) pattern. Side load is observed during the transition of separation pattern at different NPR.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.614-617
• /
• 2008

An unstructured hybrid mesh flow solver has been developed for the simulations of three dimensional steady and unsteady incompressible flow fields. The incompressible Navier-Stokes equations with an artificial compressibility method were discretized by using a node-based finite-volume method. For the unsteady time-accurate computation, a dual-time stepping method was adopted to satisfy a divergence free flow field at each physical time step. The one equation Spalart-Allmaras turbulence model has been adopted to solve the high-Reynolds number flow fields. This method has been applied to calculate the steady flow fields around submarine configurations and unsteady flow fields around a 3-D infinite cylinder.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.130-133
• /
• 2007

A two-phase method in CFD has been developed and is applied to model the cavitation flow. The governing equation system is two-phase Navier-Stokes equation, comprised of the mixture mass, momentum and liquid-phase mass equation. It employs an implicite, dual time, preconditioned algorithm using finite difference scheme in curvilineal coordinates and Chien ${\kappa}-{\varepsilon}$ turbulence equation. The experimental cavitating flows around ogive-cylinder and venturi type objects are employed to test the solver. To prove the capabilities of the solver, several three-dimentional examples are presented.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.52-61
• /
• 2004

In the present study, a solution algorithm for the computation of unsteady flows on unstructured meshes is presented. Dual time stepping is incorporated to achieve the second-order temporal accuracy while reducing errors associated with linearization and factorization. This allows any time step size, which is suitable for considering physical phenomena of interest. The Gauss-Seidel scheme is used to solve the linear system of equations. A special treatment based on spring analogy is made to handle meshes with high aspect-ratio cells. The present method was validated by comparing the results with experimental data and those obtained from rigid motion.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.59-62
• /
• 2002

In the present study, solution algorithms for the computation of unsteady flows on an unstructured mesh are presented. Dual time stepping is incorporated to achieve the 2-nd order temporal accuracy while reducing the linearization and the factorization errors associated with a linear solver. Hence, any time step can be used by only considering physical phenomena. Gauss-Seidel scheme is used to solve linear system of equations. Rigid motion and spring analogy method fur moving mesh are all considered and compared. Special treatments of spring analogy for high aspect ratio cells are presented. Finally, numerical results for oscillating wing are compared with experimental data.