• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.672-677
• /
• 2004

In this paper, a new dual-rate digital control technique for the Takagi-Sugeno (T-S) fuzzy system is suggested. The proposed method takes account of the stabilizablity of the discrete-time T-S fuzzy system at the fast-rate sampling points. Our main idea is to utilize the lifted control input. The proposed approach is to obtain the dual-rate discrete-time T-S fuzzy system by discretizing the overall dynamics of the T-S fuzzy system with the lifted control, and then to derive the sufficient conditions for the stabilization in the sense of the Lyapunov asymptotic stability for this system. An example is provided for showing the feasibility of the proposed discretization method.

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.259-266
• /
• 2006

A dual-channel glass coil sampling technique was used to measure hourly formaldehyde concentration in the ambient air. The dual-channel coil sampling assembly consists of three parts; an all-pyrex 28-turn coil made of 0.2-cm internal diameter glass tubing for gas-liquid contact and scrubbing of soluble gases, an inlet section upstream of the coil for introducing sample air and scrubbing solution, and a widened glass section downstream of the coil for gas-liquid separation. The scrubbing solution used was a dilute aqueous DNPH (dinitrophenylhydrazine) solution. Hourly concentration of formaldehyde was determined at a Gwangju semi-urban site during two intensive studies between September and October using the dual channel glass-coil/DNPH sampling technique and HPLC (High Performance Liquid Chromatography) analysis. The mean concentration was 1.7($0.4{\sim}4.7$) and 3.0($0.5{\sim}19.1$) ppbv for the September and October intensives, respectively, which are considerably low, compared to those measured in polluted urban areas around the world including several urban areas of Korea. The diurnal variation showed significant increase of formaldehyde in the daytime suggesting the dominance of formation of formaldehyde due to photochemical oxidation of methane and other hydrocarbons. An increase in the formaldehyde sometimes in the night might be due to an increase in primary source, i.e. traffic emissions. It was also found that rapid increase in formaldehyde levels from 3.0 to 19.1 ppbv in the afternoon on October 20 was due to plumes from burning of agricultural wastes such as rice straw and stubble. It is expected from the measurement data that the constructed dual-channel glass coil sampling system can be utilized for measuring atmospheric concentration of the formaldehyde with high time resolution.

• 디지털산업정보학회논문지
• /
• 제7권4호
• /
• pp.119-131
• /
• 2011

In this paper, we explore the application of 2-D dual-tree discrete wavelet transform (DDWT), which is a directional and redundant transform, for image coding. DDWT main property is a more computationally efficient approach to shift invariance. Also, the DDWT gives much better directional selectivity when filtering multidimensional signals. The dual-tree DWT of a signal is implemented using two critically-sampled DWTs in parallel on the same data. The transform is 2-times expansive because for an N-point signal it gives 2N DWT coefficients. If the filters are designed is a specific way, then the sub-band signals of the upper DWT can be interpreted as the real part of a complex wavelet transform, and sub-band signals of the lower DWT can be interpreted as the imaginary part. The quincunx lattice is a sampling method in image processing. It treats the different directions more homogeneously than the separable two dimensional schemes. Quincunx lattice yields a non separable 2D-wavelet transform, which is also symmetric in both horizontal and vertical direction. And non-separable wavelet transformation can generate sub-images of multiple degrees rotated versions. Therefore, non-separable image processing using DDWT services good performance.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 추계 학술발표회 논문집
• /
• pp.79-84
• /
• 2005

The growing number of households with only cellular phones and no landline telephones, is decreasing the coverage of the landline frame. Dual frame sample designs are considered which draw phone numbers from the landline and the cellular number frame. Cellular phones may be used as personal or household devices. Weighting strategies appropriate to compensate for unequal probabilities in selecting dual frame samples are proposed. Also, some current issues are discussed.

• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.465-471
• /
• 2023

본 논문은 CMOS Image Sensor(CIS)에 사용되는 single-slope ADC(SS-ADC)의 노이즈와 출력의 지연을 개선한 비교기 구조를 제안한다. 노이즈와 출력의 지연 특성을 개선하기 위해 비교기의 첫 번째 단의 출력 노드와 두 번째 단의 출력 노드 사이에 커패시터를 삽입하여 miller effect를 이용한 비교기 구조를 설계하였다. 제안하는 비교기 구조는 작은 capacitor를 이용하여 노이즈와 출력의 지연 및 layout 면적을 개선하였다. Single slop ADC에서 사용되는 CDS 카운터는 T-filp flop과 bitwise inversion 회로를 사용하여 설계하였고 전력 소모와 속도가 개선되었다. 또한 single slop ADC는 analog correlated double sampling(CDS)와 digital CDS를 함께 동작하는 dual CDS를 수행한다. Dual CDS를 수행함으로써 fixed pattern noise(FPN), reset noise, ADC error를 줄여 이미지 품질이 향상된다. 제안하는 comparator 구조가 사용된 single-slope ADC는 0.18㎛ CMOS 공정으로 설계되었다.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1448-1455
• /
• 2008

본 논문은 대부분의 Linux 운영체제에서 지원해 주는 System V의 IPC 중 하나인 Shared Memory를 Dual Core 시스템 상에서 동작하도록 설계한다. Linux에서 사용되는 Shared Memory는 동일한 메모리 영역에 여러 개의 프로세스가 접근할 수 있도록 해 주는 기술이 다. 본 논문에서는 Shared Memory의 큰 두 갈래 중 커널 단계에서 처리되는 SVR(System V Release) 형식의 Shared Memory를 다룬다. 본 논문에서는 리눅스 운영체제의 공유 메모리 기능을 Dual Core 시스템에서 동작하도록 설계한다. 본 논문에서 제안하는 Dual Core 시스템에서 공유 메모리 기능 설계 방안은 듀얼 코어를 활용하여 기존의 단일 처리기 시스템에서보다 성능을 향상시킬 수 있도록 한다. 공유 메모리를 이용한 프로세스의 동작이 별개의 CPU에서 동작되도록 함으로써 성능 향상을 꾀한다.

• Journal of information and communication convergence engineering
• /
• 제2권4호
• /
• pp.205-208
• /
• 2004

In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital IF techniques, polyphase analysis filter bank as channelizer. Also, Remez exchange algorithm is employed in the realization of the digital filter in the polyphase analysis filter bank. For performance analysis of dual-band CDMA system, we consider power loss of IF signal after passing through channel and the filter. Also, the performance for different sampling rates is analyzed.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.129-132
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.457-461
• /
• 1988

In this study an one-board micom controlled precision temperature control system has been developed. The digital temperature control system is consisted of an one-board micom as digital controller, a 12-bit A/D and D/A converter, a power amplifier, a NTC thermister, a preamplfier and a heat chamber. An operating control program for the control system was written in Z80 machine language. A Dual-PID predictor control algorithm was proposed. Experments were conducted with different sampling time and limitted error value. As a result, the temperature in a heat chamber can be well controlled within +- 0.2 .deg.C when the sampling time was applied to 10 sec and the limitted error value +- 0.5 .deg.C under the dual-PID predictor control algorithm. By means of one-board micom overall system has been reduced in size and volume, thus the system becomes compact and less expensive.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.45-50
• /
• 2008

The Fourier-Mellin transform is the theoretical basis for the translation, rotation, and scale invariance of an image. However, its implementation requires a log-polar map of the original image, which requires logarithmic sampling of a radial variable in that image. This means that the mapping process is accompanied by considerable loss of data. To solve this problem, we propose a dual log-polar map that uses both a forward image map and a reverse image map simultaneously. Data loss due to the forward map sub-sampling can be offset by the reverse map. This is the first step in creating an invertible log-polar map. Experimental results have demonstrated the effectiveness of the proposed scheme.