• 제목/요약/키워드: Dual Field

검색결과 637건 처리시간 0.022초

전계방출광원용 듀얼 에미터 특성 연구 (The dual emitter structure for field emission light source)

  • 김광복;이선희;박호섭;양동욱;김대준
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.151-154
    • /
    • 2008
  • The field emission lamps have the advantages to their cold cathode-characteristic and the eco-friendly, We realized that the dual emitter system showed very simple structure which gate and cathode electrodes are formed on the same glass surface. In this paper, we reported the properties of dual emitters depended on variation of gate width and spacing for optimum panel structure. In combination of dual emitter structure and bi-polar driving, electron beam spreads more than normal gate structure or diode structure, and emission uniformity increased in dual emitter structure at 5"-diagonal.

  • PDF

Total Skin Electron Beam을 이용한 급성 골수성 백혈병 환자 치료에 대한 연구 (Study of Acute Myelocytic Leukemia Patient Treatment That Used Total Skin Electron Beam)

  • 이상율;강민규;김성규
    • 한국의학물리학회지:의학물리
    • /
    • 제20권3호
    • /
    • pp.152-158
    • /
    • 2009
  • 선형 가속기의 Total Skin Electron Beam Therapy (TSEBT)는 유용하게 사용 되어왔으며, 2에서 9 MeV 에너지 영역의 전자는 mycosis fungoides와 cutaneous lymphomas와 같은 신체의 큰 부분을 덮는 표면상의 병변 치료에 사용 되어져 왔다. 본 연구에서는 Stanford technique로 환자를 치료 하였으며, Stanford technique는 선형 가속기로 전자 빔을 수평 방향으로 조사하여 서 있는 환자의 주위에 $60^{\circ}$로 위치한 6개의 조사면(anterior, posterior, 그리고 4개의 obliques)으로 치료하는 TSEBT의 표준이 되는 방법이다. 각 조사면은 수평으로 하고 적절한 각도에 점을 맞춘 두 개 성분의 빔으로 이루어져있다. 치료시간을 짧게 하기 위해 환자는 하루에 세 개의 이중 조사면으로 치료한다. 첫째 날에는 anterior로 하나의 이중 조사면, posterior에서 두 개의 이중 조사면 그리고 그 다음날에 posterior에서 하나의 이중 조사면 그리고 anterior 경사에서 두 개의 이중 조사면으로 치료한다. 따라서 6개의 이중 조사면의 완전한 주기는 2일로 완성된다. 환자를 치료하기 전 먼저 선량 측정을 하기 위해 원통형 아크릴 팬텀을 제작하여 그 사이 선량계 필름을 삽입하고 환자가 치료 받는 6개 조사면 방향으로 조사를 한 후 선량 분포를 알아보았다. 그런 후 Rando 팬텀을 사용하여 열형광선량계(thermoluminescent dosimetry : TLD)를 앞 가슴, 좌우 옆구리, 등에 부착한 후 6개 조사면 방향으로 방사선을 조사한 후 선량을 측정 하였다.

  • PDF

이중계자를 갖는 10 MW급 전초전도 동기 발전기의 교류손실 해석 (AC Loss Analysis of 10 MW Class Fully High Temperature Superconducting Synchronous Generators with Dual Field Windings)

  • 박상호;이명희;이세연;양형석;김우석;이지광;최경달
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제6권4호
    • /
    • pp.467-472
    • /
    • 2020
  • The superconducting synchronous generator is one of the breakthrough elements for direct-drive wind turbines because it is light and small. Normally the superconducting one has copper armature windings in the stator and superconducting field windings on the rotor. The high resistance of the armature can make large copper losses, comparing with the conventional generators with a gear box. One of the solutions for the large copper losses could be a fully superconducting generator. But the high magnetic fields from the superconducting field windings on the rotor also make high perpendicular magnetic fields on the superconducting tapes in the armature windings. We have proposed a fully superconducting synchronous generator with dual field windings. It could immensely decrease the circumferential component of the magnetic field from the field windings at the armature windings. In this paper, we conceptually designed 3 types of superconducting synchronous generators. The first one is the fully superconducting one with conventional structure, which has superconducting armature windings in the stator and superconducting field windings on the rotor. The second one is the one with dual superconducting field windings and superconducting armature windings between them. The last one is the same as the third one except the structure of the armature. If the concentrated armature windings are superconducting ones with cryostats, then they cannot be installed within the span of 2 poles. So, we adopted 3 phases windings within 4 poles system. It makes more AC losses but can be manufactured really.

Leakage Magnetic Field Suppression Using Dual-Transmitter Topology in EV Wireless Charging

  • Zhu, Guodong;Gao, Dawei;Lin, Shulin
    • Journal of Power Electronics
    • /
    • 제19권3호
    • /
    • pp.625-636
    • /
    • 2019
  • This paper proposes an active leakage magnetic field (LMF) suppression scheme, which uses the dual-transmitter (DT) topology, for EV wireless charging systems (EVWCS). The two transmitter coils are coplanar, concentric and driven by separate inverters. The LMF components generated by the three coils cancel each other out to reduce the total field strength. This paper gives a detailed theoretical analysis on the operating principles of the proposed scheme. Finite element analysis is used to simulate the LMF distribution patterns. Experimental results show that when there is no coil misalignment, 97% of the LMF strength can be suppressed in a 1kW prototype. These results also show that the impact on efficiency is small. The trade-off between LMF suppression and efficiency is revealed, and a control strategy to balance these two objectives is presented.

The Novel Efficient Dual-field FIPS Modular Multiplication

  • Zhang, Tingting;Zhu, Junru;Liu, Yang;Chen, Fulong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권2호
    • /
    • pp.738-756
    • /
    • 2020
  • The modular multiplication is the key module of public-key cryptosystems such as RSA (Rivest-Shamir-Adleman) and ECC (Elliptic Curve Cryptography). However, the efficiency of the modular multiplication, especially the modular square, is very low. In order to reduce their operation cycles and power consumption, and improve the efficiency of the public-key cryptosystems, a dual-field efficient FIPS (Finely Integrated Product Scanning) modular multiplication algorithm is proposed. The algorithm makes a full use of the correlation of the data in the case of equal operands so as to avoid some redundant operations. The experimental results show that the operation speed of the modular square is increased by 23.8% compared to the traditional algorithm after the multiplication and addition operations are reduced about (s2 - s) / 2, and the read operations are reduced about s2 - s, where s = n / 32 for n-bit operands. In addition, since the algorithm supports the length scalable and dual-field modular multiplication, distinct applications focused on performance or cost could be satisfied by adjusting the relevant parameters.

I/Q 변조 풀이 방식의 헤테로다인 간섭계를 이용한 미소 전기장 및 복굴절 측정 (A new, hybrid, heterodyne, fiber-optic electric field sensor scheme and its applications)

  • 윤신영;조규만;이용산
    • 한국광학회지
    • /
    • 제8권2호
    • /
    • pp.161-164
    • /
    • 1997
  • 편광유지 광섬유를 이용한 주파수가 안정화된, 두 개의 서로 수직으로 편광된 종모우드를 갖는 He-Ne레이저 빛을 LoTa $O_{3}$ 위상변조기로 구성된 센서부(sensor head)로 전달해 줌으로써 원격에서 전기장을 측정할 수 있는 hybrid, heterodyne 간섭식 센서를 구성하였다. In/quadrature-phase위상변조풀이 방식을 이용하여 전기광학 효과에 의해 서로 수직으로 편광된 두 모우드 사이에 유도된 위상차이를 측정함으로써 항상 높은 검지율을 유지할 수 있는 전기장 센서를 구성하고, 이를 이용하여 광학 물질에 유도된 복굴절도 측정을 할 수 있었다.

  • PDF

이중 대역 확산기를 이용한 전자파 잔향실 시험 주파수 대역 확장 및 전자기장 균일도 향상에 관한 연구 (Expansion of Test Frequency Band and Improvements of Field Uniformity in a Reverberation Chamber by Using Dual-Band Diffusers)

  • 임욱채;이중근
    • 한국전자파학회논문지
    • /
    • 제17권1호
    • /
    • pp.74-80
    • /
    • 2006
  • 본 논문은 전자파 장해 및 복사 내성 측정의 대용 시험 시설로서 활용될 수 있는 전자파 잔향실의 전자기장 특성에 관한 연구이다. 잔향실 내에는 서로 다른 두 주파수 대역에서도 사용 가능한 이중 대역 확산기(diffuser)가 적용되었고, 이중 대역 확산기는 서로 다른 단일 대 역 Schroeder 방식의 QRD(Quadratic Residue Diffuser)로 합성되었다. 잔향실 내부의 전자기장 분포 해석을 위해서는 FDTD(Finite-Difference Time-Domain) 수치 해석 방식이 이용되었다. 잔향실에 사용된 이중 대역 확산기는 단일 대역 확산기에 비해 시험할 수 있는 주파수 대역 확장 뿐 아니라, 잔향실의 전자기장 균일도, 편파 특성, 전력 효율 및 공차 등의 성능을 향상시켰다. 따라서 이중 대역 확산기를 사용한 잔향실이 단일 대역 확산기를 사용한 잔향실보다 효율적인 시험시설로서 활용될 수 있음을 확인하였다.

초음속 이중 동축 제트유동에서 발생하는 충격파 구조에 관한 연구 (Study of the Shock Structure of Supersonic, Dual, Coaxial, Jets)

  • 이권희;이준희;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.417-422
    • /
    • 2001
  • The shock structure of supersonic, dual, coaxial jet is experimentally investigated. Eight different kinds of coaxial, dual nozzles are employed to observe the major features of the near field shock structure of the supersonic, coaxial, dual jets. Four convergent-divergent supersonic nozzles having the Mach number of 2.0 and 3.0, and are used to compare the coaxial jet flows discharging from two sonic nozzles. The primary pressure ratio is changed in the range between 4.0 and 10.0 and the assistant jet pressure ratio from 1.0 to 4.0. The results obtained show that the impinging angle, nozzle geometry and pressure ratio significantly affect the near field shock structure, Mach disk location and Mach disk diameter. The annular shock system is found depending the assistant and primary jet pressure ratios.

  • PDF

Influence of gravity, locality, and rotation on thermoelastic half-space via dual model

  • Samia M. Said
    • Structural Engineering and Mechanics
    • /
    • 제89권4호
    • /
    • pp.375-381
    • /
    • 2024
  • In this paper, Eringen's nonlocal thermoelasticity is constructed to study wave propagation in a rotating two-temperature thermoelastic half-space. The problem is applied in the context of the dual-phase-lag (Dual) model, coupled theory (CD), and Lord-Shulman (L-S) theory. Using suitable non-dimensional fields, the harmonic wave analysis is used to solve the problem. Comparisons are carried with the numerical values predicted in the absence and presence of the gravity field, a nonlocal parameter as well as rotation. The present study is valuable for the analysis of nonlocal thermoelastic problems under the influence of the gravity field, mechanical force, and rotation.

GF($2^m$) 상의 유한체 승산기 설계 및 비교 (A Design and Comparison of Finite Field Multipliers over GF($2^m$))

  • 김재문;이만영
    • 전자공학회논문지B
    • /
    • 제28B권10호
    • /
    • pp.799-806
    • /
    • 1991
  • Utilizing dual basis, normal basis, and subfield representation, three different finite field multipliers are presented in this paper. First, we propose an extended dual basis multiplier based on Berlekamp's bit-serial multiplication algorithm. Second, a detailed explanation and design of the Massey-Omura multiplier based on a normal basis representation is described. Third, the multiplication algorithm over GF(($2^{n}$) utilizing subfield is proposed. Especially, three different multipliers are designed over the finite field GF(($2^{4}$) and the complexity of each multiplier is compared with that of others. As a result of comparison, we recognize that the extendd dual basis multiplier requires the smallest number of gates, whereas the subfield multiplier, due to its regularity, simplicity, and modularlity, is easier to implement than the others with respect to higher($m{\ge}8$) order and m/2 subfield order.

  • PDF