• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.21-29
• /
• 2012

A dual loop waste heat recovery system with Rankine steam cycles for the improvement of fuel efficiency of gasoline vehicles has been investigated. A high temperature loop (HT loop) only recovers the heat of the exhaust gas. A low temperature loop (LT loop) recovers the residual heat from the HT loop, the coolant heat and the remaining exhaust gas heat. The two separate loops are coupled with a heat exchanger. This paper has dealt with a layout of the dual loop system, the review of the working fluids, and the design of the cycle. The design point and the target heat recovery of the HT boiler, a core part of a HT loop, have been presented. The prototype of the HT boiler was evaluated by experiment. For the performance evaluation of the HT boiler, inlet temperature of the HT boiler working fluid was set equal to the temperature degree of sub-cool of $5^{\circ}C$ at the condensing pressure. The exit condition was the degree of super-heat set at $5^{\circ}C$. The characteristics of the HT boiler such as heat recovery and pressure drops of fluids were evaluated with varying flow rates and inlet temperatures of exhaust gas under various evaporating pressure conditions.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.899-909
• /
• 2015

A dual-input boost-buck converter with coupled inductors (DIBBC-CI) is proposed as a thermoelectric generator (TEG) power conditioner with a wide input voltage range. The DIBBC-CI is built by cascading two boost cells and a buck cell with shared inverse coupled filter inductors. Low current ripple on both sides of the TEG and the battery are achieved. Reduced size and power losses of the filter inductors are benefited from the DC magnetic flux cancellation in the inductor core, leading to high efficiency and high power density. The operational principle, impact of coupled inductors, and design considerations for the proposed converter are analyzed in detail. Distributed maximum power point tracking, battery charging, and output control are implemented using a competitive logic to ensure seamless switching among operational modes. Both the simulation and experimental results verify the feasibility of the proposed topology and control.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.213-220
• /
• 2016

The "China Zun" tower in Beijing will rise to 528 meters in height and will be the tallest building in Beijing once built. Inspired by an ancient Chinese vessel, the "Zun", the plan dimensions reduce gradually from the bottom of the tower to the waist and then expand again as it rises to form an aesthetically beautiful and unique geometry. To satisfy the structural requirement for seismic and wind resistance, the structure is a dual system composed of a perimeter mega structure made of composite mega columns, mega braces, and belt trusses, and a reinforced-concrete core with steel plate-embedded walls. Advanced parametric design technology is applied to find the most efficient outer-perimeter structure system. The seismic design basically follows a mixed empirical and performance-based methodology that was verified by a shaking table test and other specimen lab tests. The tower is now half-way through its construction.

• 한국지구과학회지
• /
• 제28권7호
• /
• pp.838-846
• /
• 2007

미고결, 난투수층 퇴적층 시료의 투수계수와 전기비저항의 측정이 가능한 삼축압력 측정장치를 설계하고 제작하였다. 이 측정장치는 측정셀 전후에 입출력 유량측정시스템이 설치되어 시료의 봉압을 증가시키면서 투수계수와 전기비저항을 동시에 측정할 수 있다. 아치의 법칙과 실험전후의 시료 질량 변화와 부피를 이용하여 공극률을 측정할 수 있다. 실험을 위한 시료는 표준모래와 일라이트 진흙을 성분비율을 다양하게 혼합한 인공시료와 동해 울릉분지에서 채취한 현장시료를 사용하였다. 이들 시료들에 대한 투수계수, 전기비저항을 봉압이 증가함에 따라 측정하고 분석하였다. 봉합이 증가함에 따라서 투수계수와 공극률은 지수적으로 감소하고 전기비저항은 지수적으로 증가한다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2395-2406
• /
• 2023

To study the influence of parameter uncertainty in small pressurized water reactor (SPWR) once-through steam generator (OTSG), the nonlinear mathematical model of the SPWR is firstly established. Including the reactor core model, the OTSG model and the pressurizer model. Secondly, a control strategy that both the reactor core coolant average temperature and the secondary-side outlet pressure of the OTSG are constant is adopted. Then, the uncertainty quantification method is established based on Latin hypercube sampling and statistical method. On this basis, the quantitative platform for parameter uncertainty of the OTSG is developed. Finally, taking the uncertainty in primary-side flowrate of the OTSG as an example, the platform application work is carried out under the variable load in SPWR and step disturbance of secondary-side flowrate of the OTSG. The results show that the maximum uncertainty in the critical output parameters is acceptable for SPWR.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.66-72
• /
• 2008

본 연구에서는 대심도 지하역사에서 화재가 발생할 시 급/배기 팬의 동작 유무에 따른 승강장에서의 열 및 연기의 거시적인 거동을 화재시뮬레이션을 통하여 분석하였다. 시뮬레이션 분석결과를 토대로 현재 설치된 급/배기 팬에 대한 제연/배연능력에 대하여 고찰하였다. 본 연구의 대상은 숭실대 입구 역사(7호선, 도시철도공사운영)이며, 숭실대 역사의 승강장은 길이 165m, 폭 23.5m, 깊이 47m 이다. 본 연구에서 전산수치해석을 위한 모델은 선로부 지하터널를 감안하여 전후 각 100m를 추가하였다. 따라서 모델링의 크기는 길이 365m, 폭23.5m, 깊이 47m 이다. 격자는 육면체 정렬격자계를 사용하였으며, 격자의 수는 대략 10,000,000 개가 사용되었다. 빠른 수치전산처리를 위하여, 병렬처리기법을 적용하였다. 본 전산수치해석에 사용된 CPU자원에 Intel 3.0GHZ Dual CPU 6개(core 12개)가 사용되었다.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1250-1256
• /
• 2017

In this research, a high-performance ultrasonic positioning system is proposed to track the positions of an indoor mobile object. Composed of an ultrasonic sender (mobile object) and a receiver (anchor), the system employs three ultrasonic time-off-flights (TOFs) and trilateration to estimate the positions of the object with an accuracy of sub-centimeter. On the other hand, because ultrasonic waves are interfered by temperature, wind and various obstacles obstructing the propagation while propagating in air, ultrasonic pulse debounce technique and Kalman filter were applied to TOF and position calculation, respectively, to compensate for the interference and to obtain more accurate moving object position. To perform tasks in real time, ultrasonic signals are processed full-digitally with a Zynq SoC, and as a software design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams. And, a hardware/software co-design is implemented, where the digital circuit portion is designed in the Zynq's fpga and the software portion is c-coded in the Zynq's processors by using the baremetal multiprocessing scheme in which the c-codes are distributed to dual-core processors, cpu0 and cpu1. To verify the usefulness of the proposed system, experiments were performed and the results were analyzed, and it was confirmed that the moving object could be tracked with accuracy of sub-cm.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.274-281
• /
• 2010

본 논문에서는 반도체 플라즈마 식각 시스템의 균일도 향상을 위한 CCP와 ICP 결합 임피던스정합 장치를 제안한다. 이중주파수 전원공급 장치는 CCP와 ICP로 구성되어 있고 첫 번째 구성은 고집적화를 위해 페라이트 코어를 사용한 유도 결합 플라즈마(ICP : Inductively Coupled Plasma)방식이며, 두 번째 구성은 셀 전체의 균일도 향상을 위한 용량 결합 플라즈마(CCP : Capacitively Coupled Plasma)방식이다. 제안된 시스템은 반도체 장비 산업에서 요구되는 높은 생산성을 실현할 수 있다. 본 논문에서는 제안된 시스템의 타당성을 검증하기 위해 CCP와 ICP 결합 임피던스정합 장치를 제작하였고, 이론적 분석과 27.12MHz 와 400kHz의 조건에서 시뮬레이션 및 실험을 진행하였다

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.267-272
• /
• 2015

Active noise control (ANC) is a method of cancelling a noise signal in an acoustic cavity by generating an appropriate anti-noise signal via canceling loudspeakers. The continuous progress of ANC involves the development of improved adaptive signal processing algorithms, transducers, and DSP hardware. In this paper, the convergence behavior and the stability of the FxLMS algorithm in ANC systems with real-time implementation is proposed. Specially, The advanced DSP H/W with dual core(DSP+ARM) and API(application programming interface) S/W programming was developed to improve the real-time implementation performance under the FxLMS algorithms of input noise such as road noise environment. The experimental results are found to be in good agreement with the theoretical predictions.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.43-45
• /
• 2012

This paper is based on embedding the biometrics techniques on GPU for better computational efficiency and fast matching process using the parallel nature of the GPU processors to compare thousands of images for fingerprint recognition in a fraction of a second. In this paper we worked on GPU (INVIDIA GeForce GTX 260 with compute capability 1.3 and dual core-2-dou processor) for fingerprint matching and found that the efficiency is better than the results with related work already done on CMOS, CPU, ARM9, MATLAB Neural Networks etc which shows the better performance of our system in terms of computational time. The features matching process proposed for fingerprint recognition and the verification procedure is done on 5,000 images which are available online in the databases FVC2000, 2002, 2004 [1].