• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.1-9
• /
• 2016

본 연구는 PPI Scop 레이더 장치에서 수신된 정보신호 중 영상신호 분리와 합성과정을 거쳐 영상신호 생성, 심볼생성, 양성 잔상 신호 생성 결합 처리 과정을 거쳐 레이더 정보 분석용 화면에서 운영자의 판별 용이성, 가독성 향상과 더불어 운영 편리성을 획기적으로 향상시킬 수 있는 기술적 구현방안에 대하여 2가지 형태로 연구하였다. 첫째, FPGA기반 고속 프로세스 정보처리 연산시스템으로 구성된 하드웨어 자원을 이용하여 시스템의 고속화 안정성을 갖추도록 하였다. 둘째, 소프트웨어 자원인 함수곡선 알고리즘과 지능화된 알고리즘을 연계 구현하여 레이더 정보, 분석 시스템에서 필요한 제약요건을 충족할 수 있도록 연구하였다. 기존의 레이더 시스템에서 구현이 불가능 하였던 프레임 단위 영상데이터 분석을 위해 영상캡처와 저장, 레이더 정보 표출 영상을 MPEG4 동영상으로 저장을 할 수 있도록 하였다. 연구의 핵심은 영상 양성 처리 함수곡선 알고리즘을 통해 육안판별에서 관찰 목표물, 특정 감시 대상물체 정보를 강조, 지연표출 및 색상 표현도 할 수 있도록 하였다. 고속 FPGA기반에 탑재된 ARM Processor Support in Pro ASIC3 적용하여 지능화된 알고리을 부분적으로 탑재시켜 시스템의 신뢰성과 효율 제고로 운영자 정보판독 가독성 향상은 물론 최적화된 고해상도 영상, 고속의 정보 분석 및 다양한 정보 표출을 유지할 수 있도록 구현하였다.

• Journal of Power Electronics
• /
• 제4권3호
• /
• pp.138-151
• /
• 2004

In this paper, a constant frequency phase shifting PWM-controlled voltage source full bridge-type series load resonant high-frequency inverter using the $4^{th}$ generation IGBT power modules is presented for innovative consumer electromagnetic induction heating applications, such as a hot water producer, steamer and super heated steamer. The bridge arm side link passive capacitive snubbers in parallel with each power semiconductor device and AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is evaluated and discussed on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency inverter topology, what is called, DE class type, including the variable-power variable-frequency regulation function can expand zero voltage soft switching commutation area even under low output power setting ranges, which is more suitable and acceptable for newly developed induction heated dual pack fluid heaters. Furthermore, even the lower output power regulation mode of this high-frequency load resonant tank inverter circuit is verified so that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.904-911
• /
• 2011

본 논문에서는 도파관 여파기 설계에 유용한 이중 공진 구조를 제안하였다. 본 구조는 리지가 있는 원형 개구와 네 개의 팔(arm)을 갖는 사각형 도체 패치가 결합된 아이리스 형태로서 한 개의 통과 대역과 그 양쪽에 두개의 저지 대역이 동시에 나타나는 이중 공진 특성을 갖는다. 이러한 공진 특성은 LC-병렬 공진 회로와 직렬 공진 회로가 결합된 등가 회로를 통하여 잘 설명되고, 구조의 파라미터를 조정하여 쉽게 조절할 수 있다. 실제 구조는 마이크로스트립을 에칭하여 도파관의 단면에 삽입하기 쉬운 아이리스 형태로 구현되었다. WR-90 규격의 도파관 및 어댑터, VNA를 사용하여 이 공진 구조의 투과 특성을 측정하였다. 제안된 구조의 이중 공진 특성은 도파관 여파기 설계 및 스커트 특성 개선에 유용할 것으로 기대된다.

• Physical Therapy Rehabilitation Science
• /
• 제6권2호
• /
• pp.65-70
• /
• 2017

Objective: The purpose of this study was to examine the intertester reliability and validity of four nonradiologic measurements of thoracic spine rotation in healthy adults. Design: Descriptive laboratory study. Methods: This study was conducted on 20 male and 20 female university students aged between 19 and 26. To measure thoracic rotation, a goniometer, a bubble inclinometer, a dual inclinometer, and a smartphone application-clinometer were used. The measurement was performed twice for each device and the same measurement was performed by two examiners. The measurements were performed in the lumbar locked position. The arm in the direction of rotation was taken back and placed onto the back of the lumbar region. With right and left trunk rotation, the head was rotated together but remained in the center line so that the axial rotation was maintained. Both examiners performed the measuring procedures and directly handled the measuring instrument. All measurement results were recorded by the recorder. Results: The range of motion (ROM) of thoracic rotation in lumbar locked position for all four devices was 47 degrees. The intra-rater reliability estimates ranged from 0.738 to 0.906 (p<0.05). The inter-rater reliability estimates ranged from 0.736 to 0.853 (p<0.05). The goniometer, bubble inclinometer, dual inclinometer, and smartphone clinometer showed high validity (p<0.05). This result indicates that all four devices may be used by the same examiner and by other examiners obtaining follow-up measurement. Conclusions: The use of the goniometer, bubble inclinometer, dual inclinometer, and smartphone clinometer for measurements in the lumbar locked posture are reliable and valid nonradiologic measures of thoracic rotational ROM in healthy adults.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.774-777
• /
• 2005

In this paper, a constant frequency phase shifting PWM controlled voltage source full bridge-type series load resonant high-frequency inverter using the IGBT power modules is presented for innovative consumer electromagnetic induction heating applications such as a hot water producer, steamer and super heated steamer. The full bridge arm side link passive quasi-resonant capacitor snubbers in parallel with the each power semiconductor device and high frequency AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is discussed and evaluated on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency soft switching PWM inverter topology, what is called class DE type. including the variable-power variable-frequency(VPVF) regulation function can expand zero voltage soft switching commutation range even under low output power setting ranges, which is more suitable and acceptable for induction heated dual packs fluid heater developed newly for consumer power utilizations. Furthermore, even in the lower output power regulation mode of this high-frequency load resonant tank high frequency inverter circuit it is verified that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.231-236
• /
• 2019

Background/Objectives: This paper proposes a dual mode feedback-controlled cycling system for children with spastic cerebral palsy to rehabilitate upper extremities. Repetitive upper limb exercise in this therapy aims to both reduce and analyze the abnormal torque patterns of arm movements in three- dimensional space. Methods/Statistical analysis: We designed an exercycle robot which consists of a BLDC motor, a torque sensor, a bevel gear and bearings. Mechanical structures are customized for children of age between 7~13 years old and induces reaching and pulling task in a symmetric circulation. The shafts and external frames were designed and printed using 3D printer. While the child performs active/passive exercise, angular position, angular velocity, and relative torque of the pedal shaft are measured and displayed in real time. Findings: Experiment was designed to observe the features of a cerebral palsy child's exercise. Two children with bilateral spastic cerebral palsy participated in the experiment and conducted an active exercise at normal speed for 3 sets, 15 seconds for each. As the pedal reached 90 degrees and 270 degrees, the subject showed minimum torque, in which the child showed difficulty in the pulling task of the cycle. The passive exercise assisted the child to maintain a relatively constant torque while visually observing the movement patterns. Using two types of exercise enabled the child to overcome the abnormal torque measured in the active data by performing the passive exercise. Thus, this system has advantage not only in allowing the child to perform the difficult task, which may contribute in improving the muscle strength and endurance and reducing the spasticity but also provide customizable system according to the child's motion characteristic. Improvements/Applications: Further study is needed to observe how passive exercise influences the movement characteristics of an active motion and how customized experiment settings can optimize the effect of pediatric rehabilitation for spastic cerebral palsy.

• 대한임베디드공학회논문지
• /
• 제10권4호
• /
• pp.233-239
• /
• 2015

This paper describes a method that is integrated trace for real-time virtualization environment. This method has solved the problem that the performance trace may not be able to analyze integrated method between heterogeneous operating systems which is consists of real-time operating systems and general-purpose operating system. In order to solve this problem, we have attempted to reuse the performance analysis function in general-purpose operating system, thereby real-time operating systems can be analyzed along with general-operating system. Furthermore, we have implemented a prototype based on ARM Cortex-A15 dual-core processor. By using this integrated trace method, real-time system developers can be improved productivity and reliability of results on real-time virtualization environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1650-1654
• /
• 2004

This paper presents how it is effective to use many features for improving the speed and the accuracy of the visual servo systems. Some rank conditions which relate the image Jacobian and the control performance are derived. It is also proven that the accuracy is improved by increasing the number of features. Effectiveness of the redundant features is evaluated by the smallest singular value of the image Jacobian which is closely related to the accuracy with respect to the world coordinate system. Usefulness of the redundant features is verified by the real time experiments on a Dual-Arm Robot manipulator made in Samsung Electronic Co. Ltd.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.184-189
• /
• 2002

Collision free task planning for dual-arm robot which perform many subtasks in a common work space can be achieved in two steps : path planning and trajectory planning. Path planning finds the order of tasks for each robot to minimize path lengths as well as to avoid collision with static obstacles. A trajectory planning strategy is to let each robot move along its path as fast as possible and delay one robot at its initial position or reduce speed at the middle of its path to avoid collision with the other robot.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.267-272
• /
• 2015

Active noise control (ANC) is a method of cancelling a noise signal in an acoustic cavity by generating an appropriate anti-noise signal via canceling loudspeakers. The continuous progress of ANC involves the development of improved adaptive signal processing algorithms, transducers, and DSP hardware. In this paper, the convergence behavior and the stability of the FxLMS algorithm in ANC systems with real-time implementation is proposed. Specially, The advanced DSP H/W with dual core(DSP+ARM) and API(application programming interface) S/W programming was developed to improve the real-time implementation performance under the FxLMS algorithms of input noise such as road noise environment. The experimental results are found to be in good agreement with the theoretical predictions.