• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.605-614
• /
• 2010

Conventional rolling (symmetric) and differential speed rolling (DSR) were both applied to AA1050 sheets at various velocity ratios, from 1 to 2 between the top and bottom rolls. An electron backscatter diffraction (EBSD) technique was used to measure texture inhomogeneity through the thickness direction. After the annealing process, the annealing texture of the DSR processed sheets was different from that of conventionally rolled sheets. The velocity ratio between the top and bottom rolls affected the texture inhomogeneity and macroscopic plastic strain ratio of the AA1050 sheets. A prediction for the macroscopic plastic strain ratio of AA1050 sheets was carried out using a visco-plastic self-consistent (VPSC) polycrystal model. The strain ratio directionality that was predicted using the VPSC polycrystal model was in good agreement with experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.57-58
• /
• 2006

The effects of lowering ECAP temperature during ECAP process and Post-ECAP annealing on microstructure, texture and mechanical properties of the AZ31 alloys have been investigated in the present study. The as-extruded materials were ECAP processed to 2 passes at 553K prior to subsequent pressing up to 6 passes at 523K or 493K. When this method of lowering ECAP temperature during ECAP was used, the rods could be successfully deformed up to 6 passes without any surface cracking. Grain refinement during ECAP process at 553K might have helped the material to endure further straining at lower deformation temperatures probably by increasing the strain accommodation effect by grain boundary sliding, causing stress relaxation. Texture modification during ECAP has a great influence on the strength of Mg alloys because HCP metals have limited number of slip systems. As slip is most prone to take place on basal planes in Mg at room temperature, the rotation of high fraction of basal planes to the directions favorable for slip as in ECAP decreases the yield stress appreciably. The strength of AZ31 Mg alloys increases with decrease of grain size if the texture is constant though ECAP deformation history is different. A standard positive strength dependence on the grain size for Mg alloys with the similar texture (Fig. 1) supports that the softening of ECAPed Mg alloys (a negative slope) typically observed despite the significant grain refinement is due to the texture modification where the rotation of basal planes occurs towards the orientation for easier slip. It could be predicted that if the original fiber texture is restored after ECAP treatment yielding marked grain refinement, yield stress as high as 500 MPa will be obtained at the grain size of ${\sim}1{\mu}m$. Differential speed rolling (DSR) with a high speed ratio between the upper and lower rolls was applied to alter the microstructure and texture of the AZ31 sheets. Significant grain refinement took place during the rolling owing to introduction of large shear deformation. Grain size as small as $1.4{\mu}m$ could be obtained at 423K after DSR. There was a good correlation between the (0002) pole intensity and tensile elongation. This result indicates that tensile ductility improvement in the asymmetrically rolled AZ31 Mg alloys is closely related to the weakening of basal texture during DSR. Further basal texture weakening occurred during annealing after DSR. According to Hall-Petch relation shown in Fig. 1, the strength of the asymmetrically rolled AZ31 is lower than that of the symmetrically rolled one when compared at the same grain size. This result was attributed to weakening of fiber texture during DSR. The DSRed AZ31, however, shows higher strength than the ECAPed AZ31 where texture has been completely replaced by a new texture associated with high Schmid factors.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.101-107
• /
• 2011

The background noises and distortions by channel are major factors that disturb the practical use of speech recognition. Usually, noise reduce the performance of speech recognition system DSR(Distributed Speech Recognition) based speech recognition also bas difficulty of improving performance for this reason. Therefore, to improve DSR-based speech recognition under noisy environment, this paper proposes a method which detects accurate speech region to extract accurate features. The proposed method distinguish speech and noise by using entropy and detection of spectral energy of speech. The speech detection by the spectral energy of speech shows good performance under relatively high SNR(SNR 15dB). But when the noise environment varies, the threshold between speech and noise also varies, and speech detection performance reduces under low SNR(SNR 0dB) environment. The proposed method uses the spectral entropy and harmonics of speech for better speech detection. Also, the performance of AFE is increased by precise speech detections. According to the result of experiment, the proposed method shows better recognition performance under noise environment.

• CELLMED
• /
• v.8 no.2
• /
• pp.10.1-10.2
• /
• 2018

The aims of this article is to examine that Daegeum Sanjo Rhythm (DSR) compare with Jinyang-jangdan and Jajinmori-jangdan on music therapy. Daegeum has the largest range of notes in wind instruments through Korean music. Jangdan is the essential element of rhythm in Korean music. Just as human body sound and resonant with their rhyme and meters, jangdan has its own rhythms of physical structures and sequence and repeat. Jinyang-jangdan, which is close to western minor code, expresses heartbreaking grief and great mourning feeling, so it makes one feel the catharsis through that rhythm. Jinyang-jangdan of daegeum music may be slow, but it can be sublimated into grim music for human. So, people overcome the sadness through grim music. On the other hand, jajinmori-jangdan gives charm and gaiety to people and to everything. So, it is exciting that it's often performed in festival and parade. Rhythmical music is a tool to improve the well-being of humanity and increase our life choices. Therefore, music therapy surely needs both influences of daegeum sanjo music regardless of the rhythm. Because, daegeum sanjo music is nature-friendly music of the rhythm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.207-215
• /
• 2004

There are various characteristics called for in work roll and intermediate rolls for cold rolling mills. Among these characteristics, the two main requirements are to ensure the quality of the rolled products and to reduce roll cost. To achieve these needs, resistance to wear, to thermal shock and to contact fatigue are especially important. This paper describes that new material(named DSR1) for intermediate rolls which greatly increases rolling campaign and improves resistance to wear has been developed. DSR1 was successfully manufactured and has been used in the cold rolling mill. It showed that Trial product was homogenous in hardness distribution and sufficient usable diameter. Also in service test, trial product is much more excellent rolling performance than conventional $5\%Cr$.

• Journal of Chest Surgery
• /
• v.21 no.2
• /
• pp.223-230
• /
• 1988

Emax, end-systolic pressure-volume relationship, has been established as a new concept which can be representative of ventricular contractility itself since 1970s. Comparing to ejection fraction[EF], Emax is independent of preload and afterload. However Emax has not been proved precisely in non-thoracotomized condition because current methods have limitation in measuring ventricular chamber volume accurately in in viva state. The Dynamic Spatial Reconstructor[DSR], high speed computerized tomography, can measure ventricular chamber volume accurately throughout cardiac cycle in non-thoracotomized state. So Emax and EF of the left ventricle was tried to measure precisely in in vivo condition with DSR. Emax was compared to EF to estimate its ability to evaluate ventricular contractility. 5 mongrel dogs, weighing 15-16kg, were used for measuring Emax and EF of the left ventricle in 3 or 4 different loading conditions using DSR. Emax value in 5 dogs was from 2.62 to 10.49. Each dog has one Emax value regardless of loading conditions. However EF in 5 dogs varies depending on loading conditions. The conclusions are that Emax is useful in in viva state and EF varies depending on loading conditions. So Emax should be tried to use in clinical situation rather than EF because it is always representative of contractility itself regardless loading conditions in in viva state.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.259-269
• /
• 2014

After global financial crisis, the ratio of household debt to GDP was decreasing in other advanced countries such as the U.S., and the U.K. and so on. But, in Korea, household debt (of which residential mortgage loan account for a large part) ratio is still increasing. This paper focuses on the scale and characteristics of households in negative housing equity (those are called House-poors in Korea), and also the socio-economic backgrounds of the formation process. In financial perspective, the problem of negative housing equity depends on financial debt repayment capability. We used DSR (Debt Service Ratio) and LTA (Loan to Asset ratio) as financial indicators to evaluate the debt repayment capability. The critical value of DSR is assumed as 40%, and LTA 100%. The socio-economic backgrounds of the House-poors are as follows : increasing households debt dependency, over lending competition of financial institutions and unreasonable loan in household economy, instability of real estate market, week regulation on mortgage loan. Finally, this paper suggests some implications about the range and the target of public intervention.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.509-521
• /
• 2014

In this paper two protocols of Wireless Sensor Networks (WSN) are examined through both a simulation and a case study. The simulation was performed with the optimized network (OPNET) simulator while comparing the performance of the Ad-Hoc on demand Distance Vector (AODV) and the Dynamic Source Routing (DSR) protocols. This is compared and shown with real-world measurement of deflection from eight wireless sensor nodes. The wireless sensor response results were compared with accelerometer sensors for validation purposes. It was found that although the computer simulation suggests the AODV protocol is more accurate, in the case study no distinct difference was found. However, it was shown that AODV is still more beneficial in the field as it has a longer battery life enabling longer surveying times. This is a significant finding as a large factor in determining the use of wireless network sensors as a method of assessing structural response has been their short battery life. Thus if protocols which enhance battery life, such as the AODV protocol, are employed it may be possible in the future to couple wireless networks with solar power extending their monitoring periods.

• Journal of Microbiology
• /
• v.37 no.3
• /
• pp.175-179
• /
• 1999

To elucidate the role of vir-box in the expression of the virE gene, the vir-box was modified by site-directed mutagenesis and tested for ${\beta}$-galactosidase activities. A, C, T T, A, C substitutions at -62, -63, and -65 positions, destroying the 5'-region of the vir-box and A T at position -55, destroying the 3'-region of the vir-box respectively, showed only 17% promoter activity. When the vir-box was modified to contain perfect dyad symmetry structure (DSR) by the substitutions T, G A, T at -60 an d-61 positions, ${\beta}$-glactosidase activity increased 302%. These results indicate that the 5' and 3'-region of vir-box as well as the imperfect DSR of the vir-box itself may play a very important role in the regulation of virE gene expression.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.208-213
• /
• 2003

Recently, a variety of new routing protocols targeted specifically wireless mobile nodes environment have been developed. This paper presents the results of a detailed packet level simulation comparing two multi-hop wireless ad-hoc network routing protocols that cover a range of design choices between DSDV and DSR. And we suggest a performance comparison of network routing protocols through NS-2 simulator.