• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.53-66
• /
• 1987

Korean red pine (Pinus densiflora S. et. Z.) and pitch pine(Pinus rigida Mill) $5{\times}10cm$ dimension lumber were dried in a kiln providing a cross-circulation velocity of 5 m/sec at dry-and wet-bulb temperatures of 116 and $71^{\circ}C$, followed by 3 hours at 91 and $85^{\circ}C$. Compared to dimension lumber dried lumber were as follows. 1. To dry to 10 percent moisture content, the high-temperatures schedule of Korean red pine and pitch pine lumber took less than one seventh the time required by the conventional kiln drying schedule. 2. High-temperature drying rate and conventional drying rate to 10 percent moisture content of Korean red pine lumber were 2.75 and 0.35%/hr, and those of pitch pine lumber were 3.38 and 0.46%/hr respectively. 3. Compared to lumber of both species on conventional schedule, moisture gradient of high-temperature lumber was greater. 4. Compared to lumber on conventional schedule, maximum surface checking of high-temperature lumber of both species was severer, and maximum end checking of high-temperature lumber of both species was similar to that of lumber on conventional schedule. 5. Compard to lumber on conventional schedule, Korean red pine lumber dried at high temperature showed more honeycombing, but pitch pine lumber dried at high-temperature showed significantly slighter honeycombing. 6. Compared to lumber on conventional schedule, the high-temperature lumber showed less warping lumber of both species. 7. Collapse and casehardening of Korean red pine and pitch pine lumber on both scheules were slight.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.67-74
• /
• 1997

A relationship between drying resistance and moisture content was found for 24, 27 and 30mm thick boards, and 45, 51 and 57mm thick dimensions of Japanese larch. Dahurian larch and radiata pine in order to modify the kiln schedule by using time schedules. The amount of drying resistance for Dahurian larch lumber was the highest, and radiata pine lumber was the lowest, on the basis of the same moisture content range. Drying resistance increased curvilinearly as moisture content decreased, and was higher for thicker lumber than for thinner lumber, at a given moisture content. Combined drying resistance for the three board thicknesses and the three dimension thicknesses showed a comparatively strong for radiata pine and a Japanese larch, while a weak correlation for Dahurian larch as a function of two independent variables, thickness and moisture content of lumber, respectively.

• Journal of Forest and Environmental Science
• /
• 제12권1호
• /
• pp.1-12
• /
• 1996

강원도산(江原道産) 참나무과(科) 4수종(樹種)의 건조특성(乾操特性)을 파악코져 $100^{\circ}C$에서 급속건조(急速乾操)를 실시하여 건조중(乾操中) 함수율(含水率)과 건조경과(乾操經過), 초기할열(初期割裂)(목구할열(木口割裂)과 표면할열(表面割裂)), 찌그러짐, 내부할열(內部割裂) 등의 건조결함(乾操缺陷)을 조사하여 추정건조(推定乾操)스케쥴을 작성한 결과(結果)는 다음과 같다. 건조시간별(乾操時間別) 건조중(乾操中) 함수율(含水率)은 초기함수율(初期含水率)이 높은 판재일수록 급속(急速)한 곡선적(曲線的) 감소(減少)를 나타내었고 건조소요시간(乾操所要時間)은 두께가 두꺼울수록, 초기함수율(初期含水率)이 높을수록, 건조중(乾操中) 함수율(含水率) 변화( 變化)가 느린 수종(樹種)일수록 길었다. 또한, 두께가 두꺼울수록 할열(割裂)의 발생량(發生量)이 증가하므로 건조초기(乾操初期)의 조건(條件)을 완화하게 해야 함을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.9-15
• /
• 2001

침엽수 4수종(소나무, 잣나무, 낙엽송, 웨스턴 햄록)의 가열판 압체식 진공건조에서 소요되는 비에너지 곡선은 함수율 감소에 따라 서서히 증가, 거의 일정, 급속 증가 등 3단계의 증가 패턴을 나타내었고, 제재두께별 계산된 비에너지는 3cm 제재 0.483, 5cm 제재 0.649, 7cm 제재 0.814, 9cm 제재 0.977 및 11cm 제재 1.138kWh/kg로서 두께가 증가함에 따라 거의 직선적으로 증가하였고, 강한 건조스케줄을 적용한 비에너지는 약한 건조스케줄의 것보다 적었으며, 가열판 진공건조의 평균 비에너지는 0.712kWh/kg으로서 다른 건조법의 것보다 적었다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.11-16
• /
• 2007

본 연구는 통죽의 송풍오븐 건조중 수증기댐 처리가 건조속도 및 할렬과 외주할 예방에 미치는 영향을 조사하였다. 생재에서 함수율 약 7~8%까지 건조되는데 소요되는 시간은 건조스케줄이 과격할수록 적었으며, 건조소요시간은 건조초기의 건조속도에 의해서 크게 좌우되는 것으로 나타났다. 건조중 횡단면적 수축율과 통피층의 두께수축율은 모두 비정상적일 정도로 매우 크게 나타났다. 무처리재의 경우 건조개시 직후 할렬과 외주할이 발생하였으며, 수증기댐 처리재에서는 약 67% 정도의 건조수율을 기대할 수 있었다. 수증기댐 처리재의 외주할은 건조조건 보다는 수증기댐 처리에 의한 횡단면을 통과하는 수분의 증발 차폐정도와 밀접한 관련이 있는 것으로 평가되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.67-81
• /
• 1989

This experiment was carried out to know the mothod of changing the step of moisture content schedule with time in conventional kiln drying. For the purpose of this object. we made drying model by applying the moisture diffusion model by J.FSiau(1984) to average moisture content equation by J.Crank(1956) derived it from Fick's second law. And to verify this method of drying model. 2.5cm-thick boards and 5.0cm-thick dimension lumbers of Pinus densiflora were kiln-dried with the schedule of T11-C3 and T10-C4, respectively. And then the drying rates were investigated and compared with those calculated from drying model. The results obtained were as follows 1. Average drying rate and total drying time of board to dry to 6.5% moisture content were 0.64%/hr and 109hr., and those of dimension lumber to dry to 8.3% moisture content were 0.4%/hr. and 162hr., respectively. 2. The moisture content of shell and core decreased by equalizing treatment and increased by conditioning treatment both on board and dimension lumber. But the moisture gradient was lower after conditioning than after equalizing. 3. As the drying was proceeded, the transverse bound water diffusion coefficient all but linearly decreased, the water vapor diffusion coefficient abruptly curvilinearly increased, while the transverse diffusion coefficient curvilinearly decreased both on board and dimension lumber. But each of diffusion coefficients on board was larger than that on dimension lumber. 4. Compared to experimential drying rate of board. theoretical drying rate was larger at 30.0%-21.8% moisture content range and was similiar at 21.8%-5.4% moisture content. And in case of dimension lumber, the drying rate was similiar at 30.0%-16.1% moisture content range but theoretical drying rate was much lower at 16.1%-8.3% moisture content range. 5. The possibility of adapting this drying model to changing the moisture content schedule step with time was in the range of 21.8%-5.4% moisture content on board. And in the case of dimension lumber that was in the range of 30.0%-16.1% moisture content.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• Journal of the Korean Wood Science and Technology
• /
• 제14권1호
• /
• pp.45-54
• /
• 1986

A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.10-16
• /
• 2018

비목나무는 줄기가 곧고 직경이 40 cm까지 자라지만 아직 미사용되고 있다. 잘 알려지지 않은 수종을 이용하려면 먼저 그 수종의 열기건조스케쥴을 찾아야 한다. 비목나무의 열기건조스케쥴을 테라자와의 오븐급속건조법으로 추정하였으며, 열기건조 실험을 통해 검증하였다. 비목나무의 평균 생재함수율과 평균 생재비중은 각각 72.3%과 0.53이다. 테라자와의 오븐급속건조법을 사용하여 얻은 25 mm 두께 비목나무의 가장 안전한 건조조건은 초기건조온도 $50^{\circ}C$, 초기건습구온도차 $4^{\circ}C$, 말기건조온도 $75^{\circ}C$이다. 이러한 조건에 맞는 미임산물연구소 스케쥴은 T5-D4이다. 추정 열기건조스케쥴 T5-D4와 새로운 개량 열기건조스케쥴 T8-C5로 25 mm 판재를 건조한 결과, 모두 불가피하게 발생한 수심재터짐 이외에는 내부할렬과 틀어짐이 전혀 발생하지 않았다.

• Journal of Korean Biological Nursing Science
• /
• 제13권1호
• /
• pp.8-15
• /
• 2011

Purpose: The purpose of this study was to analyze effects of hand drying methods after hand-washing. Hand drying methods consisted of spontaneous evaporation, paper towel, hand dryer with rubbing, and hand dryer without rubbing. Methods: The research design was a crossover design. The subjects were eighteen university students and randomly assigned in four group. Each group had the schedule of treatment. The schedule tested one drying method per a day and proceeded for 4 days. The data collection was performed from July 27 to July 30, 2010. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Wilcoxon test. Results: There was significant difference between the after CFU between natural dry, paper towel, air dryer with hand rubbing, and air dryer without hand rubbing(p=.006). The after CFUs of paper towel, natural dry and air dryer without hand rubbing groups were statistically less than air dryer with hand rubbing group. Conclusion: It was shown that the paper towel, spontaneous evaporation and without rubbing hand dryer are effective hand drying interventions on reducing CFU on hand. However additional researches with large sample and strict methodology are needed.