• 동아시아식생활학회지
• /
• 제25권1호
• /
• pp.111-120
• /
• 2015

This study was conducted to evaluate the effects of Sunsik prepared by steaming -drying cycles- on blood glucose and inflammatory markers in high fat diet-induced obese rats. The experimental animals were divided into five groups and subjected to diets for 8 weeks; normal diet (control), high fat diet (HF), and high fat diet+10% supplementation of Sunsik (1HF, 3HF, 7HF, 9HF). The results showed body weight, food efficiency ratio, blood glucose and insulin levels of high fat diet groups were significantly higher than those of the control group. Increased glucose levels by high fat diet were reduced to normal levels by the four Sunsik supplementations. Insulin resistance (HOMA-IR) of the HF group was significantly higher than those of the control group, whereas supplementation with the four types of Sunsik reduced insulin resistance to similar levels as the control group. Increased insulin secretion and leptin levels of high fat diet-induced obese rats were significantly reduced by supplementation with the four types of Sunsik. C-reactive protein (CRP) of inflammation related components was significantly higher than the control group. However, increased CRP concentration by high fat diet was significantly reduced by supplementation with Sunsik.

• Composites Research
• /
• 제24권5호
• /
• pp.17-22
• /
• 2011

최근 투명전극으로 주로 사용되고 있는 ITO 재료를 대체하가 위해 CNT를 이용한 투명전극의 활용 연구가 활발히 진행되고 있다. 본 연구에서는 건조온도에 따라 CNT와 ITO의 응집이 일어나는 정도가 달라진다는 점을 이용하여 표면을 조절하여 CNT 및 ITO가 코팅된 폴리에틸렌 테레프탈레이트 (PET)를 제조하였다. CNT를 ITO를 대신할 투명전극으로의 활용 가능성을 평가하면서, 표면의 물성 변화를 유도 하기 위해 코팅 후 건조온도를 $20^{\circ}C$, $80^{\circ}C$, 그리고 $120^{\circ}C$ 3단계로 나누어 표면을 관찰하였다. 전기저항측정법을 활용하여 재료의 내구성 및 전기적 물성을 평가함으로써 제조한 투명전극의 특성을 평가하였다. 전자현미경을 이용하여 건조온도에 따른 표면 변화를 관찰하였고, UV-스펙트럼을 통해 건조온도가 증가함에 따라 투과도가 변화하는 것을 확인하였다. 나노입자의 코팅 표면 조절에 따른 전기적 물성 변화를 확인하기 위해 순환전압전류법을 이용 하였다. CNT 코팅 표면의 내구성이 ITO 코팅 표면의 내구성보다 우수함을 알았다. 그리고, 건조온도가 높을수록 나노입자들의 응집이 크게 증가 하여 내구성이 우수한 코팅 표면을 만들며, 이에 따른 전기적 물성의 향상도 확인하였다.

• 한국재난정보학회 논문집
• /
• 제9권4호
• /
• pp.493-502
• /
• 2013

이 연구의 목적은 낙동강에 대규모로 부존되어 있는 세사를 콘크리트 잔골재로서 적극적으로 활용하기 위하여 이를 사용한 콘크리트의 건조수축 및 내구성을 평가하는 것이다. 이를 위하여 낙동강 본류의 중 하류에서 하천세사를 채취한 후 강도수준에 따라 콘크리트 배합실험을 수행하였다. 그 결과로부터 압축강도와 시멘트-물비의 상관식을 도출한 후 하천세사 종류별로 설계기준강도 35MPa에 대해서 콘크리트 공시체를 제작하여 이들의 건조수축과 동결융해 및 탄산화 저항성과 같은 내구성을 평가하였다. 그 결과, 하천세사를 사용한 콘크리트의 내구성은 기준모래를 사용한 콘크리트의 경우와 유사한 것으로 나타났으나, 하천세사의 건조수축은 조립률이 작은 경우 기준모래를 사용한 콘크리트보다 비교적 큰 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.60-66
• /
• 2019

콘크리트의 낮은 인장강도 및 균열제어 능력 등의 약한 재료성질을 개선하기 위하여 수년간 하이브리드 섬유보강 콘크리트에 관한 많은 연구가 진행되어 왔다. 그러나 비정질 강섬유와 유기섬유를 이용한 하이브리드 섬유보강 콘크리트에 관한 연구는 이루어지지 않은 실정이다. 따라서, 본 연구의 목적은 비정질 강섬유와 유기섬유로서 폴리아미드 섬유를 이용한 하이브리드 섬유보강 콘크리트의 압축강도, 장기 건조수축 및 내동해성을 평가하는 것이다. 이를 위하여 목표 압축강도 40 및 60 MPa 각각에 대해서 하이브리드 섬유 혼입률을 전체 체적비로 1.0%로 설정하여 비정질 강섬유와 폴리아미드 섬유를 이용한 하이브리드 섬유보강 콘크리트를 제작하였다. 제작된 하이브리드 섬유보강 콘크리트의 장기 건조수축 및 내동해성을 평가한 결과, 재령 365일 및 730일에서의 장기 길이변화율은 플레인 콘크리트보다 각각30%, 25% 이상 감소된 것으로 나타났으며, 동결융해 300 사이클 후의 내구성 지수는 90% 이상으로, 내동해성이 있는 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.53-63
• /
• 1979

The knowlege of thermal properties of rough rice has become of greate importance to the analysis of heat and mass transfer phenomenon in rice drying and storage process. Some information is available on the thermal properties of rough rice in foreign countries but is not available for these properties in Korea. A fundamental study was made to determine the thermal conductivity and thermal diffusivity of rough rice with line source method and to select current and resistance suitable for these properties from investigating the effect of current and resistance of heating wire on the temperature rise. The result of this study may be summarized as follows ; 1. Even through the power per unit length of heating wires is about the same, the tendency of temperature rise showed a little difference among them , and the suitable range of it for thermal properties was found to be 3.56-5.37w/m. 2. the most desirable resistance and current of heating wire was 18.40 ohm/m, 0.44 amperes among three kinds of heating wires and currents, respectively. because it took 13 minutes or so for the heating wire to reach equilibrium temperature. 3. The thermal conductivity of rough rice was 0.120-0.130 w/m$ ^\circ C$. and thermal diffusivity of it was $5.8210 $\times10^{-8} -9.7529 $\times10^{-8} m^2 /s.$ 4.The thermal conductivity showed a little difference in variation with resistance of heating wire but the variation of current of heating wire at the same resistance did not affect the thermal conductivity , and the thermal diffusivity was not affected by the variation of resistance and current.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.29-32
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. The purpose of this study is to investigate quality of recycled fine aggregate manufactured by drying manufacturing system which is the manufacture method of high duality recycled fine aggregate, and to analyze on thehardened and durability properties of recycled concrete using it. Therefore it is to present the fundamental data for application and utilization of recycled concrete. The results of this study are as follows; Quality of recycled fine aggregate by drying manufacturing system is improved, and compressive strength, carbonation depth and chloride ion penetration depth of recycled concrete using high quality recycled fine aggregate are similar to those of normal concrete using natural and crashed sand. But, resistance to $H_{2}SO_{4}$ show decreased somewhat.

• The Korean Journal of Ecology
• /
• 제24권4호
• /
• pp.223-226
• /
• 2001

The leaf water relations and photosynthetic rate during acute soil drying were compared in potgrown grapevine cultivars, Vitis vinifera cv. Chardonnay and V. vinifera cv. Riesling. Leaf water potential in Riesling decreased significantly from day 2 after water had been withheld, while in Chardonnay leaf water potential for the water-stressed plants was almost identical with that in well watered plants during the first 4 days. Higher stomatal conductance and photosynthetic rate in Chardonnay than Riesling were observed until day 3 after withholding water. Photosynthetic rate in water-stressed Chardonnay was not different from that in control plants until day 3 after withholding water, while that in water-stressed Riesling was reduced markedly from day 2. In Riesling, osmotic potential at turgor loss point was not changed irrespective of watering conditions. However, in Chardonnay osmotic potential at turgor loss point decreased more in the water stressed conditions than in well watered conditions. The osmotic adjustment in Chardonnay under water stress conditions must contribute to the maintenance of higher stomatal conductance and photosynthetic rate than those in Riesling for a significant period of the drying process. Though difference in stomatal conductance between the two cultivars was shown in the process of soil drying, stomatal conductance of both cultivars responded to vapor pressure difference between leaf and ambient air, rather than soil water status and leaf water potential.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.161-166
• /
• 1998

The main object of this study is to examine the basic properties of fresh concrete as well as hardened concrete using several types of cement such as ordinary portland cement, sulphate resisting portland cement, blast furnace slag cement, ternary blended cement. In addition, effects of each cement on the durability including drying shrinkage, freeze-thawing resistance, resistance of chloride ion penetration, carbonation of concrete were investigated. As the results of this study, it was proved that most of the properties of concrete using each cement were similar, but there were some differences in bleeding, setting time, resistance of chloride ion penetration and carbonation.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.41-48
• /
• 2000

This study is to investigate for the frost resistance of high-strength concrete using finely ground granulated blast-furnace slag with experimental parameters, such as water/binder ratio, replacement proportion of granulated blast-furnace slag, air content and methods of curing. The high-strength concrete using granulated blast-furnace slag is effective to resist frost and decrease scaling. The more increasable replacement proportion of granulated blast-furnace slag is, the better the effect is. The high-strength concrete using granulated blast-furnace slag needs hydrating adequately to prevent deterioration by drying in the early curing period. The micro structure of high-strength concrete, increased to the pore number with diameter of 0.03~0.1mm, is changed by using granulated blast-furnace slag, but is presented differently according to water/binder ration and replacement proportion of granulated blast-furnace slag.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.