• 제목/요약/키워드: Drying rate

검색결과 956건 처리시간 0.027초

공극률과 건조율을 이용한 다공질 사암의 투과도 추정방법 제안 (A Suggested Method for Predicting Permeability of Porous Sandstone Using Porosity and Drying Rate)

  • 고은지;김진후
    • 지구물리와물리탐사
    • /
    • 제17권3호
    • /
    • pp.121-128
    • /
    • 2014
  • 투과도는 다공질 암석 내에서 유체의 유동 특성을 나타내는 중요한 매개변수로서 일반적으로 코어 시료의 유체 유동실험을 통해 산출된다. 하지만, 유체 유동실험을 위해서는 별도의 실험장치가 필요하며, 투과도가 낮을 경우 많은 시간이 소요될 수 있다. 본 연구에서는 일련의 투과도 측정 실험 없이 시료의 건조과정만으로 투과도를 도출하기 위해 유체투과도, 공극률, 건조율간의 상관관게를 분석하였다. 공극률은 표면건조 포화시료를 건조시키면서 무게 변화를 연속적으로 측정하는 건조 모니터링 방법을 이용하여 산출하였으며, 건조율은 물 포화율에 따른 시료의 무게 변화율로부터 구했다. 70 ~ 670 mD의 투과도를 보이는 6개의 베레아 사암을 이용해 회귀분석한 결과 공극률 및 건조율로부터 다공성 사암의 투과도를 예측할 수 있는 새로운 경험식을 도출하였다.

식품의 건조 및 수축특성에 관한 연구 - 2. 다시마의 건조 및 수축특성에 영향을 미치는 인자 - (Drying and Shrinking Characteristics of Food 2. Influencing Factors in Drying and Shrinking Characteristics of Sea Tange)

  • 조덕제;허종화;정수열
    • 한국수산과학회지
    • /
    • 제21권1호
    • /
    • pp.16-20
    • /
    • 1988
  • 다시마의 건조와 수축특성을 알기위한 기초자료를 얻고자 건조중인 다시마의 건조 및 수축특성에 미치는 채취부위, 공기의 온도, 상대습도 및 풍속의 영향에 관하여 실험한 결과를 요약하면 다음과 같다. 1) 다시마의 열풍건조과정은 항률건조 기간이 없이 바로 감률건조기가 나타났으며 이것은 다시 감률건조 1단계 및 2단계로 구분되었다. 2) 두께가 얇은 선단부가 기부보다 수축이 더 많이 되었으며 공기의 온도 $50^{\circ}C$, 상대습도 $30\%$, 유속 0.4m/s의 일정한 건조 조건하에서 다시마의 선단부, 중간부 및 기부를 120분까지 건조하였을 경우 수축율은 각각 $57.5\%,\;54.0\%,\;42.7\%$이었다. 3) 상대습도가 낮은것은 높은것에 비해 건조속도 및 수축속도는 빨랐으나 함수률 $20\%$까지 건조하였을 경우 수축율은 오히려 상대습도가 높은것이 증가하였다.

  • PDF

원적외선과 열풍 건조조건에 따른 오징어의 건조특성 (Drying Characteristics of Squids According to Far Infrared and Heated Air Drying Conditions)

  • 강태환;홍현기;전홍영;한충수
    • Journal of Biosystems Engineering
    • /
    • 제36권2호
    • /
    • pp.109-115
    • /
    • 2011
  • Drying characteristics of squids under two dry conditions were investigated using far infrared and heated air. Dry temperatures of 40, 50 and $60^{\circ}C$ with air speed of 0.6, 0.8 and 1.2 m/s were used for evaluating far infrared squid drying. Heated air squid drying at 40 and $50^{\circ}C$ with air speed of 0.8 m/s was used as a control treatment. The two drying were evaluated in terms of drying rate, color, TBA value, aerobic bacteria, cutting shear, penetration strength, and energy consumption. The drying rate of far infrared drying was relatively faster than that of heated air drying. The drying time of far infrared drying was reduced as the drying temperature increased. The color difference of far infrared dried squids was from 18.81 to 22.85, and heated air dried squid had the color different from 23.94 to 24.09. Far infrared dried squid had relatively smaller TBA values that indicate a level of rancidity. The aerobic bacteria of heated air dried squid increased from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g before and after drying, respectively. Far infrared dried squid had relatively smaller increase (from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g). The cutting shear and penetration strength for far infrared dried squids was relatively lower. In addition, far infrared squid drying consumed relatively less energy compared to heated air drying.

건조 공정 중 요소 수지 성형재료의 경화 특성에 대한 물질전달 효과 (The Effect of Mass Transfer on the Cure Properties of the Urea Resin Moulding Compounds Under the Drying Process)

  • 김상렬;최일곤;김병철
    • Korean Chemical Engineering Research
    • /
    • 제40권6호
    • /
    • pp.681-686
    • /
    • 2002
  • 산업 현장에서 이론적인 건조방법이 실제와는 차이가 많고 또한 배기가스의 재순환이 폐열을 이용하는 목적으로 열원의 절감에는 경제적이지만 이들 파라미터에 따른 요소수지 성형화에 미치는 영향을 연구한바가 없다. 따라서 요소 수지 성형재료의 경화 특성을 건조와 성형 공정 중의 건조온도와 시간, 배기가스 재 순환률 및 성형온도에 따라 실험하여 다음과 같은 결과를 얻었다. 성형재료의 수분함량은 건조 시간과 건조 온도가 증가함에 감소하고, 건조속도는 배기가스 재 순환률이 증가하면 감소한다. 특히 경화유동도는 배기가스의 재 순환량, 건조온도 및 성형온도가 증가하면 감소한다. 또한 건조온도, 건조시간, 배기가스의 재 순환량 및 성형온도에 따라 수분함량과 경화유동도에 대한 상관식을 구하여 재현성있는 최적의 조건을 구명하였다.

겉보리의 유동층 건조특성에 영향을 미치는 인자 (Influencing Factors in Drying Characteristics of Fluidized Bed Drying of Husked Barley)

  • 김희연;한상배;권용관;이광호;정청송;하상철;김성태;송승구;조재선;허종화
    • 한국식품과학회지
    • /
    • 제33권6호
    • /
    • pp.706-713
    • /
    • 2001
  • 겉보리를 시료로 하여 건조조건을 다르게 하여 유동층 건조특성에 영향을 미치는 외부요인에 대해서 조사한 결과를 요약하면 다음과 같다. 겉보리의 유동층건조는 항률건조기가 없이 감률건조 1단계, 감률건조 2단계의 두 단계로 일어남을 알 수 있었다. 또한 건조속도상수는 충전량이 적을수록, 공기속도가 클수록, 공기온도가 높을수록, 상대습도가 낮을수록 컸으며, 감율건조단계에서 건조속도상수는 Arrhenius형의 plot에서 좋은 직선관계를 나타내어 이 단계가 활성화 과정임을 알 수 있으며, 감률건조 제1단계의 활성화 에너지는 1,100cal/gmol, 감률건조 제2단계의 활성화 에너지는 1,600cal/gmol을 각각 나타내었다.

  • PDF

Gel-Casting으로 제조한 알루미나 성형체의 건조와 미세구조 (Microstructures and Drying of the Alumina Green Body by the Gel-Casting Method)

  • 오창준;이홍림
    • 한국세라믹학회지
    • /
    • 제31권12호
    • /
    • pp.1467-1474
    • /
    • 1994
  • The effects of the dispersion, drying, and binder burning-out on the green-microstructures of gelcasted alumina were studied. The slip consisting of 55 vol% alumina powder and 5 wt% organic materials was well-dispersed by adding 0.28 wt% polyelectrolyte polymer. Green bodies were dried at >85% relative humidity at room temperature. Green-microstructures were observed to be depended on the heating rate during binder burnout. Constant drying rate was not observed in drying process of gelcasted alumina. Sintered body showed its relative density higher than 99% when it was sintered at 1$600^{\circ}C$ for 2 hours.

  • PDF

통기드럼형 의류용 건조기의 성능특성에 관한 실험적 연구 (The experimental study of the performance characteristics of a tumbler type laundry dryer)

  • 장용수;이상원;김수연;정평석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.187-192
    • /
    • 2000
  • The textile which is rotated in the tumbler dryer is dried by the heated air. the energy consumption for drying textile depends on various parameters. The objective of this study is to save the energy and the drying time. One of the various methods for energy saving is EGR(exhaust gas recirculation). We set the drying equipment for this study and perform the experimental study with the changes of the recirculation rate, the input power, and the air mass flow rate. We found the optimal drying conditions.

  • PDF

환경인자를 고려한 건조수축의 예측모델 개발 (Modelling of Drying Shrinkage for Different Environmental Conditions)

  • 한만엽
    • 콘크리트학회지
    • /
    • 제8권1호
    • /
    • pp.111-120
    • /
    • 1996
  • 콘크리트의 건조수축 특성은 콘크리트 구조물의 내구성을 결정하는 대단히 중요한 특성으로서 환경적인 요인에 영향을 많이 받는다. 이 환경적 요인은 온도, 습도, 풍속 등으로 구성되어 있는데 이들 개별적인 인자들은 변화폭이 크로, 콘크리트의 건조에 미치는 영향이 복합적이기 때문에 이들의 영향을 개별적으로 평가하는 것은 큰 의의가 없다. 본 연구에서는 건조수축에 영향을 미치는 환경적인 요인들을 통합하고자 증발속도라는 변수를 도입하였다. 적절한 온도와 습도, 풍속, 콘크리트 온도 등을 선정하여 선정된 환경하에서의 증발속도를 증발속도계로 측정하였으며, 이 결과를 기존의 PCA 도표와 비교 평가하였고, 설정된 조건하에서의 실험을 통하여 콘크리트의 건조수축과 증발속도간의 관계를 규명하였다. 또한 건조수축 실험결과와 이 변수 사이의 관계를 정량화하여 건조수축의 예측에 이용될 수 있는 예측모델식과 도표를 개발하였다.

고감성 의류용 직물의 수분이동특성 -섬유소재와 실 특성 및 실험방법에 따른 수분이동특성- (Moisture Transmission Characteristics of Fabric for High Emotional Garments -Moisture Transmission Characteristics according to Fiber Properties, Yarn Characteristics and Test Method-)

  • 김승진;김현아
    • 한국의류학회지
    • /
    • 제41권1호
    • /
    • pp.28-42
    • /
    • 2017
  • Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

수산식품의 건조방법에 관한 연구 2. 갑오징어의 고정층건조 (Studies on the Drying Methods of Sea Foods 2. Fixed-Bed Drying of Cuttlefish)

  • 허종화
    • 한국수산과학회지
    • /
    • 제15권3호
    • /
    • pp.207-210
    • /
    • 1982
  • 갑오징어 우리나라에서 비교적 맏이 어획되어 대부분 천연건조에 의해 가공되고 있다. 갑오징어의 고정층 건조를 실시하여 건조 속도 및 Shirai식에 의한 건조 속도 상수 (k) 를 구하고, Arrhenius' plot에 의해 온도 의존성을 관찰하여 다음과 같은 결론을 얻었다. 1. 갑오징어의 수분 함량을 $40\%$이하로 낮추는데 본 실험의 경구 4시간이내가 소요되어 고정층 건조방법이 배등의 열풍건조법보다 효과적인 방법으로 판단된다. 2. 시료의 세분화, 껍질 제거, 열풍의 온도 상승 및 방향 조정 등으로 건조시간을 2시간으로 단축할 수 있었다. 3. 본 실험의 결과는 Shirai식과 Arrhenius' law에 잘 적용되었다.

  • PDF