• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.59-64
• /
• 2001

The effect of major operating parameters in spray drying sorber(=SDS) for automatic control for the simultaneous removal of acidic and organic gaseous pollutants from solid waste incinerator was performed. The field experiment was carried out in pilot scale test for the quantification of major operating parameters of hydrophilic and the hydrophobic pollutants. The removal efficiencies of $SO_2$and HCI in the 5wt% slurry condition were being increased with the increase of the stoichiometric ration which is the molecular ratio of lime to the pollutant concentration, and with the decrease of inflow flue gas temperature in the pilot SDS reactor. The removal efficiency along the height of spray drying sorber was closely related to the temperature profile, and more than 90% of total removal efficiency was achieved in an absorption region. For the removal of acidic gas the optimum operating condition considering the economics and a stable operation is the 5wt% of slurry concentration, 1.2 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. For the organic gases of benzene and toluene the removal efficiencies were 20-60% which is much lower than that of acidic gas. The best removal efficiency was obtained at 1.5 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. The organic\`s removal efficiency along the height of spray drying sorber was quite different from that of acidic gas, that is, more than 60% of the total removal efficiency for benzene and 90% of the total removal for toluene were achieved in the dried adsorption region, which was formed at the lower or exit part of the reactor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.561-567
• /
• 2000

This study was conducted to determine the effect of far infrared-vacuum drying on the quality changes of Pimpinella bracycarpa, such as drying efficiency (weight loss), color differences, browning degrees, rehydration and sensory evaluation. Wehn Pimpinella bracycarpa was dried for designated time at 5$0^{\circ}C$, 6$0^{\circ}C$ and 7$0^{\circ}C$, drying time of far infrared-vacuum drying was decreased more than 17% compared to that of infrared drying. The color changes increased as drying temperature increased and far infrared-vacuum drying made less color changes than infrared drying. Also, the total microbial counts and the number of yeast and mold were gradually reduced as drying temperature increased and drying time was longer, but there was no significant differences in microbial changes among drying methods. The rehydration rates of Pimpinella bracycarpa increased as drying temperature increased and was better at far infrared-vacuum drying than infrared drying. Also, according to the sensory evaluation after rehydration of Pimpinella bracycarpa, the hihger scores were obtained at lower temperature and far infrared-vacuum drying, especially the color was obtained much hihger score in the far infrared-vacuum drying than infrared drying. Thus, the results showed that drying efficiency and stability of rehydration and color changes was increased and the quality deterioration of Pimpinella bracycarpa could be minimized by using far infrared-vacuum drying.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.89-94
• /
• 1998

A field experiment was carried out to determine the effects of chemical drying agents at mowing on the field drying rate of alfalfa (cv. Vernal) and rye (cv. Koolgrazer) for hastening hay manuf8cture. In alfalfa; chemicals ($K_2CO_3$ 2% $K_2CO_3$ 3% $Na_2CO_3$ 2% $CaCO_3$, 2% $K_2CO_3$2% + $Na_2CO_3$, 1% only water spray and control) were treated at early bloom stage in 1995. Chemicals ($K_2CO_3$, 2%, $Na_2CO_3$, 2% $CaCO_3$, 2% and control) were applicated at different harvest stages (early heading, heading and bloom) in rye, 1996. The drying rate of alfalfa by $K_2CO_3$ treatment among chemicals was higher than control, and the duration of field dry was shortened by one day with $K_2CO_3$ application, but there was no difference in drying efficiency between $K_2CO_3$ 2% and $K_2CO_3$ 3%. In rye, however, no moisture reduction by chemicals was observed. The days required for field dry were 6, 4, and 3 days at warly heading heading and bloom stage respectively; regardless of chemical drying agents and conbol. The nutritive value of rye hay with chemicals at baling was very slightly higher than control, but there was no significant difference. Also, no difference of hay quality was found among drying agents. In conclusion, $K_2CO_3$can enhance the field drying rate of alfalfa hay, but the drying efficiency was not high, particularly in rye hay. Harvesting at early heading to heading stage was desirable for manufacture of high quality rye hay.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.258-273
• /
• 2008

For being recent high oil price age, the interest in superheated steam drying technology is increasing as the method to enhance the energy efficiency of drying process consuming a lot of energy. This technology uses the superheated steam as drying medium to dry the materials and has advantages that can save the energy by recycling the evaporated high-temperature steam, enhance the quality of dried products, and minimize the exhaust of environmental pollution materials. In this work, it has been introduced from general drying principle to the principle and related studies of drying technology using superheated steam, using examples of superheated steam with dryer types, and industrial applications.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.385-397
• /
• 2012

Purpose: Drying characteristics of sawdust was studied under batch mode using lab scale microwave dryer. The objective of this study was to investigate the effect of material load and microwave output power on drying characteristics of sawdust. Methods: Material load and microwave output power were varied from 23 to 186 g and 530 to 370 W respectively. Different kinetic models were tested to fit the drying rates of sawdust. Similarly, the activation energy was calculated by employing the Arrhenius equation. Results: The drying efficiency increased considerably, whereas the specific energy consumption significantly decreased with increase in material load and microwave output power. The cumulative energy efficiency increased by 9%, and the specific energy consumption decreased by 8% when the material load was increased from 23 to 186 g. The effective diffusivity increased with decrease in material load and increase in microwave output power. The previously published model gave the best fit for data points with $R^2$ and RMSE values of 0.999 and 0.01, respectively. Conclusions: The data obtained from this study could be used as a basis for modeling of large scale industrial microwave dryers for the pellet production.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.600-605
• /
• 2018

In this study, the combustion characteristics were investigated based on the biodrying solid recovered fuel (SRF) in a 5 Ton/day scale combustion boiler. The composition of the combustion gas containing the biodrying SRF was analyzed, the particulate matter, and its HCl content was determined with the air pollutant process test method. Mass balance, carbon balance, and combustion efficiency were calculated according to the equivalence ratio (ER) method; the energy recovery efficiency of the combustion boiler was also analyzed. The overall combustion efficiency of the biodrying SRF was 97.3 % and the energy recovery efficiency was 80.2%.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.19-29
• /
• 2006

Drying is the least developed of all unit operations of paper and board manufacture. While groundbreaking developments were Introduced during the several past decades in forming, pressing and calendering, no radical changes occurred in drying. The cylinder-drying technology is now more than 200 years old and, while it was subject to many incremental improvements, many of its inherent problems persist. We believe that conventional drying is now approaching the end of its life and the industry is ready for a major breakthrough in drying. Indeed several innovative technologies already exist at various stages of development or commercialization. In general, the novel drying technologies are striving to increase the drying rate, improve the product quality and boost the energy efficiency of drying. A novel, drying method, $Papridry^{TM}$, which combines conductive and convective heat transfer to obtain very high drying rates, is at an advanced stage of development at Paprican. The results obtained when drying printing paper ana board on a self-standing pilot $Papridry^{TM}$ machine and on the pilot paper machine equipped with a tandem of two $Papridry^{TM}$ units demonstrate both, the high drying rate and improved product quality achieved by using this drying method. A mathematical model of this operation has been developed and the software compiled with this model was used to calculate the effect of installing a $Papridry^{TM}$ unit into an existing dryer section. The model also allows to calculate the z-direction distribution of moisture and temperature at various points of the dryer section.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.67-74
• /
• 2016

The demand of environmental friendly packaging materials such as pulp mold has been increased. The application of the oil palm biomass, EFB (Empty Fruit Bunch) fiber as natural raw materials to the pulp mold could increase the usability of the pulp mold by the reduced production cost brought from the relatively low cost of EFB. The effects of the EFB(Empty Fruit Bunch) fibers on the properties of pulp mold and on the process efficiency were evaluated in this study. The pulp mold samples were prepared with mixture ONP (Old news paper) and EFB by using laboratory wet pulp molder. The changes in the drying efficiency were measured with the changes in the solid contents of pulp mold samples during drying process. The efficiency of the surface coating treatment on the pulp mold depending on the condition of the pulp mold samples were also evaluated in order to improve the water resistance properties of pulp mold. The addition of EFB increased the drying efficiency by providing the bulkier structure and the higher water contact angle, which indicated the better water resistance properties. The water resistance were improved by the surface coating treatments and the application of surface coating on the pulp mold at the higher moisture contents resulted in the higher improvement in the water resistance. The bulkier structure originated from the application of EFB fiber reduced the effects of the surface coating, which could be overcome by the control of surface coating process.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.283-288
• /
• 2010

The characteristics of a condenser dryer and a vented dryer that are common types of domestic clothes dryers for home use are predicted and compared in an effort to improve the efficiency and to overcome economical and environmental problems due to its inefficient power consumption. In the present study, a drying system is simplified by assuming the mechanism is composed of several elements such as heater and drum and mathematical models using the mass and energy conservation of moisture and air through each element are defined. Based on this mathematical model, the computational tool is developed to predict temperature, humidity and enthalpy of moisture and air in a drum and remained moisture contents (RMC) in drying materials. The computational results are verified by comparing with experimental results from existing studies. In addition, the efficiency of a dryer is calculated using these predicted results for a given condition and the drying characteristics of a condenser dryer and a vented dryer are compared and analyzed.

• Journal of the Korean Society of Visualization
• /
• v.17 no.1
• /
• pp.43-52
• /
• 2019

'Ionic wind' is phenomenon induced by corona discharge which occurs when large electric potential is applied to electrodes with high curvature. The ionic wind has advantage that it could generate forced convective flow without any external energy like separate pump. In this study, 'pin-mesh' arrangement is utilized for experiments. First, optimization of configuration is conducted with local momentum of ionic wind behind the mesh. Empirical equation for prediction about velocity profile was derived using the measured results. Secondly, the enhancement of mass transfer rate of acetone with ionic wind was analyzed. Also, the drying efficiency using a fan which has same flow rate was compared with ionic wind for identification of additional chemical reaction. At last, the drying process of organic solvent was visualized with image processing. As a result, it was shown that the use of ionic wind could dry organic matter four times faster than the natural condition.