• Structural Engineering and Mechanics
• /
• v.52 no.1
• /
• pp.35-49
• /
• 2014

This paper studies the behaviour of deteriorated reinforced concrete (RC) beams attacked by various forms of simulated acid rain. An artificial rainfall simulator was firstly designed and evaluated. Eleven RC beams ($120mm{\times}200mm{\times}1800mm$) were then constructed in the laboratory. Among them, one was acting as a reference beam and the others were subjected to three accelerated corrosion methods, including immersion, wetting-drying, and artificial rainfall methods, to simulate the attack of real acid rain. Acid solutions with pH levels of 1.5 and 2.5 were considered. Next, ultrasonic, scanning electron microscopy (SEM), dynamic, and three-point bending tests were performed to investigate the mechanical properties of concrete and flexural behaviour of the RC beams. It can be concluded that the designed artificial simulator can be effectively used to simulate the real acid rainfall. Both the immersion and wetting-drying methods magnify the effects of the real acid rainfall on the RC beams.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.171-179
• /
• 1999

The present research investigated the interaction among loading level, corrosion rate and flexural deflection of reinforced concrete beams. 10cm$\times$15cm$\times$110cm reinforced concrete beams were prepared and subjected to different levels of flexural loading, including 0%, 45% and 75% of the ultimate load. The beams with either a pre-load or a sustained load were also exposed to a laboratory environment with ponding and wetting/drying cycling at room temperature. Half cell potential and galvanized current measurements were taken to monitor corrosion process of reinforcing steel. After corrosion initiation, external current was applied to some of the beams to accelerate corrosion propagation. The beam deflections were recorded during the entire tests. The results indicate that loading level has significant effect on corrosion rate. The beams under a sustained load had much higher corrosion rate than the pre-loaded and then unloaded beams. Significant corrosion may result in an increase in beam deflection and affect serviceability of the structure. The present research may provide an insight into structural condition evaluation and service life predictions of reinforced concrete.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.362-369
• /
• 2005

Studying unsaturated soil mechanics, determination of soil water characteristic curve and permeability equation is an essential factor but it is not easy. In this research a new testing apparatus was developed to determine soil water characteristic curve and permeability equation. The testing to get saturated permeability coefficients and soil water characteristic curves for two soils was performed by using the developed testing apparatus. First, a saturated permeability testing was performed and then the testing to get soil water characteristic curve of a drying process was performed. Next, the testing to get soil water characteristic curve of a wetting process was performed. Testing results showed hysteresis phenomena between soil water characteristic curve of a drying process and soil water characteristic curve of a wetting process. The permeability equations were determined by a theoretical method where a saturated permeability coefficient and a soil water characteristic curve were used.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.219-227
• /
• 2021

Numerical simulation with Hwang's scheme, which can analyze shallow-water flow over discontinuous topography, was compared with a laboratory experiment of flooding on a perpendicular floodplain with dam-break flows. The simulation results were in good agreement with the results measured in an experimental flume with a reservoir, channel, and floodplain. The wetting and drying process on a perpendicular floodplain with a dam-break flow was particularly well simulated. The difference in simulation results according to the type of flow resistance was insignificant. The results of this study are expected to improve the accuracy of predicting inundation in urban rivers.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.95-104
• /
• 2006

Hysteresis is a common feature exhibited in hydraulic properties of an unsaturated soil. This study focuses on hysteresis observed in a compacted weathered granite subgrade soils based on the pressure plate laboratory tests. It was found that the Soil-Water Characteristics Curve of a soil is hysteretic and unique. The results also show that the wetting and drying curves predicted using the Fredlund and Xing model is quite close to the laboratory-measured results. For a specific matric suction, water content or coefficient of permeability on a wetting curve is always lower than those found on a drying curve.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.581-581
• /
• 2012

경사면의 잠김과 드러남(wetting and drying)에 대한 천수방정식의 수치 실험으로서 그 전선 근처에서 수심이 매우 작은 경우, 수심이 작을 때 2차 정확도를 위한 MUSCL의 적용 여부, 그리고 마찰 적용의 한계 수심 등에 대해 수심경사법(DGM)과 수면경사법(SGM)을 비교 검토하였다. 먼저, 포물선형 융기에서 정상상태의 기준해와 비교하고 하류에서 배수(drain)가 되는 경우를 상정하였다. 그리고 삼각형 바닥 턱을 지나는 댐 붕괴 흐름에 대한 실험의 결과와 비교하였다. 마지막으로 유사난수 발생에 의한 불규칙 바닥 구간을 지나는 가상 댐 붕괴 흐름에 대해 모의하였다. 정상 상태의 잠긴 바닥(wet bed)에 대해 정수 상태에서 SGM의 선평형성(well-balancedness)이 만족되었으나, 흐름이 상류와 사류일 때 각각 DGM과 SGM에서 유량 변동이 있음을 확인하였다. 드러난 바닥(dry bed)으로 흐름이 진행될 때 수심이 음의 값이 되지 않도록 잠김 드러남 전선근처에서 수심이 매우 작아지는 경우($<1{\times}10^{-6}m{\sim}1{\times}10^{-5}m$) 수심을 0으로 강제하고, n이 0.011과 0.04인 경우 수심이 각각 $1{\times}10^{-4}m$와 $1{\times}10^{-2}m$보다 작은 경우 마찰의 적용을 배제하는 것이 불가피하였다. SGM에 의한 MUSCL에서 수심이 $5{\times}10^{-5}m{\sim}5{\times}10^{-2}m$보다 작을 때 1차 정확도로 회귀가 불가피하였으나, DGM에서는 그와 같은 정확도의 훼손이 나타나지 않았다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.579-588
• /
• 2015

Recent climage changes have resulted in increases in rainfall intensity and flood frequency as well as the risk of flood damage due to typhoons during the summer season. Water-friendly facilities such as ecological parks and sports facilities have been established on floodplains of rivers since the river improvement project was implemented and increases in the flood levels of rivers due to typhoons can lead to direct flood damage to such facilities. To analyze the hydraulic influence of these water-friendly facilities on floodplains or to evaluate their stability, numerical analysis should be performed in advance. In addition, it is crucial to address the drying and wetting processes generated by water level fluctuations. This study uses a Nays2D model, which analyzes drying and wetting, to examine its applicability to simple terrain in which such fluctuations occur and to natural rivers in which drying occurs. The results of applying this model to sites of actual typhoon events are compared with values measured at water level observatories. Through this comparison, it is determined that values of coefficient of determination ($R^2$), mean absolute error (MAE), and root-mean-square error (RMSE) are 0.988, 0.208, and 0.239, respectively, thus showing a statistically high correlation. In addition, the results are used to calculate flood risk indices for evaluation of such risk for water-friendly facilities constructed on floodplains.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.289-296
• /
• 2016

In this study, the self-healing effect of a fiber-reinforced cement composite (FRCC) was examined using a drying-wetting test and an outdoor exposure test. The influence of various curing conditions on the self-healing effect of the FRCC was also investigated. The effect of self-healing was evaluated using a permeability coefficient and by investigating the cracks using a optical microscope. The results confirmed that the FRCC was capable of self-healing under a long wetting time and a low drying temperature. In addition, watertight performance by self-healing was shown to have a significant influence on wetting time. Meanwhile, this self-healing effect was enhanced by hydration as a result of rainfall when the FRCC was put under actual environmental conditions. Moreover, it was determined that cracking self-healing can be improved by using the appropriate admixture materials.

• Water for future
• /
• v.28 no.4
• /
• pp.215-222
• /
• 1995

The water retention function which has the hysteresis phenomena is required to analyze the Richards equation which is a governing equation of the unsaturated flow, and its hysteresis phenomena has influence upon the characteristics of the unsaturated flow. The accuracy of the published hysteresis models is compared by using experimental data of the water retention function. The apparatus to experiment the hysteresis phenomena on the soil is developed, and experimental data for the main wetting process and the main drying process of the water retention function are obtained. The parameters of the van Genuchten equation are calibrated by using experimentally obtained data. As a result of the comparison of the selected hysteresis models which simulate the main drying curve from the main wetting curve, the Model I-1(Mualem) overestimates and the Model II-1(Mualem) underestimates but the Model III-2(Park and Sonu) similarly estimates the experimental data of the main drying curve.