• Journal of the Korean Home Economics Association
• /
• v.42 no.1
• /
• pp.167-180
• /
• 2004

This study was carried out to investigate quality characteristics of chopped garlic stored at various temperature. Chopped garlic was stored at room temp.($25^{\circ}C$), refrigerator temp.($5^{\circ}C$) and frozen temp. ($-18^{\circ}C$) for 1, 2, 4, 8, 24, 48, 72 hours(room temp.) and 1, 3, 5, 7, 10, 15, 20, 30 days(refrigerator temp. and frozen temp.), respectively. Brown color, Hunter color value, vitamine C contents and flavor patterns by electronic noes of chopped garlic were measured. Fresh chopped garlic was used as control and garlic powder by hot air drying was used for comparisons. Brown color of chopped garlic increased with increasing storage time, and the intensity of that was reduced as following order such as chopped garlic stored at room temp., refrigerator temp. and frozen temp. Brown color of garlic powder was most dark amomg all the samples. The results of Hunter color value was consistent with then of brown color in chopped garlic, whereas those of garlic powder showed relatively low browning. Above results might be caused by the difference of measurement as only surface color was measured in Hunter color value unlike brown color. Vitamine C contents of chopped garlic decreased with increasing storage time, and in particular those stored at room temp. decreased markedly as retention of those stored at room temp. was 60％ of control after 1 day storage. Vitamine C retention of chopped garlic stored at refrigerator temp. was 78％ of control after 10 day storage and that stored at frozen temp. was 86％ of control after 30 day storage. At room temp., flavor pattern by electronic nose showed a difference between chopped garlic stored for 1hour and control, and showed occurrence of off odor after 1 day storage. Flavor pattern of garlic powder by electronic nose showed a mild flavor. Flavor patterns of chopped garlic stored at refrigerator temp. were similiar until 10 day storage, whereas those showed occurrence of volitile components after 15 day storage. Flavor patterns of chopped garlic stored at frozen temp. were similiar after 30 day storage, and especially those after 3 day storage were almost the same as control. Therefore it is desirable to store chopped garlic within 1 day at room temp. and within 10 days at refrigerator temp. And it is most desirable to store chopped garlic at frozen temp. as retention of quality characteristics was superior than other storage temp.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.542-547
• /
• 1998

In order to study bread properties utilizing extracts of pine needle, various mixing percentage were applied to select appropriate ratio between water and extracts. Dough pH, dough pH after first fermentation, dough volume, bread volume and baking loss rate were tested to investigate bread properties after adding extracts of pine needle to bread. The results were summarized as follows; The effects of extracts percentage on pH value of dough according to preparation method were the lowest in the method of hot air drying of pine needle powder. After first fermentation, dough pH was tended to have a the same tendency as above. Dough volume and bread volume were tended to be increased as extracts percentage of pine needle were increased. The percentage of baking loss tended to be a little increased as addition level of extracts was increased. Strength of hardness were increased as storage time passed away. In conclusion, the taste and texture of bread were tended to be decreased as storage time goes, but the strength of pine needle flavour were tended to be increased as addition level of extracts were increased, irrespective of preparation method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.300-306
• /
• 1989

This study was investigated to determine the functional properties of mugbean protein isolates(MPI) from sunhwa-nogdu(SH) and conventional mungbean varieties(C). MPI were prepared from defatted mungbean flour by extraction with 0.1N NaOH, precipitation at pH 4.5, washing of dispersed precipitate with buffer solution and distilled water, and subsequent freeze-drying. Crude protein content of MPI was in the range of $88.7{\sim}91.3%$. The lowest solubility was recorded at $pH\;4{\sim}5$, whereas the best buffering action was in the range of $5.5{\sim}7.5$. On the other hand, gelation of MPI was found to depend on the protein concentration. In the cases of foamability, % volume increase and specific volume were higher for 10 min. with a good whipping ability. And also, the MPI properties of two varieties of SH and C were compared and discussed.

• Journal of Radiation Protection and Research
• /
• v.17 no.2
• /
• pp.25-35
• /
• 1992

To evaluate tritium level in some environmental samples, tissue-free water tritium (TFWT) and tissue-bound tritium (TBT) were analyzed in rices, chinese cabbages and pine needles collected at 12 locations in Korea. The TFWT was recovered by freeze-drying of the samples and the TBT was obtained in the form of water by combustion of the dried samples. Tritium was measured by liquid scintillation counter. The concentrations of TFWT were in the range of $0.96{\sim}3.96 Bq/1,\; 0.83{\sim}3.40 Bq/1\;and\;1.02{\sim}3.01 Bq/1$ in rices, chinese cabbages and pine needles, respectively. The mean specific activity ratios (TBT/TFWT) were 0.94, 1.71 and 1.39 in rices, chinese cabbages and pine needles, respectiviely. This excess TBT in the samples may be attributed to the fact that the residence time of TBT in the plant is longer than that of TFWT. The specific activity ratio depends on the plant species, the exposed time to tritiated atmosphere, atmospheric moisture, temperature and diffusion factor.

• Korean Journal of Plant Resources
• /
• v.24 no.4
• /
• pp.438-444
• /
• 2011

This study was conducted to investigate temperature effect on seed germination behaviors and seed viability changes by drying periods of three Ulmus species (Ulmus davidiana var. japonica (Rehder) Nakai, U. pumila L., and U. parvifolia Jacq.) distributed in Korea. Statistical analysis showed that temperature had a significant effect on mean germination time in three Ulmus species, but its effect on germination percentage was only shown in U. parvifolia (p<0.01). U. davidiana var. japonica and U. pumila germinated relatively consistent in all temperature conditions, especially the latter showed high germination behaviors in low temperatures (10-15$^{\circ}C$). U. parvifolia germinated well in high temperature (25$^{\circ}C$), while this species rarely germinated in low temperature conditions (10-20$^{\circ}C$). The results confirm that seeds of U. pumila and U. parvifolia are orthodox seeds which can be stored under 4-8% moisture condition, and U. davidiana var. japonica seed is recalcitrant seed which is difficult to store for a long time. In conclusion, these differences of the germination behaviors for three Ulmus species seem to be adaptive regimes of their natural habitats, respectively.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.71-79
• /
• 2014

This study was performed to test the combustive properties of Medium Density Fibreboards (MDFs) treated with chemicals of the bis-(dimethylaminomethyl) phosphinic acid (DMDAP), N,N-dimethylethylenediaminomethyl-bis-phosphonic acid (DMDEDAP), piperazinomethyl-bis-phosphonic acid (PIPEABP), and methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP). MDFs were painted in three times with 15 wt% solution of the bis-(dimethylaminomethyl) phosphinic acid and alkylenediaminoalkyl-bis-phosphonic acids at the room temperature, respectively. After drying MDF treated with chemicals, combustive properties and volatile organic compounds (VOCs) contents were examined by the cone calorimeter (ISO 5660-1), test for flame retardant (NEMA Notice No. 2012034), and gas chromatography (KS M ISO 11890-2), respectively. It was indicated that the MDFs treated with chemicals showed the longer time to combustion time (CT) = (442~492) s than that of virgin plate by reducing the burning rate except for CT treated with DMDAP. In adition, the MDFs treated with chemicals showed both of the higher char area (44.33~61.33) kg/kg and char length (10.33~11.67) cm than those of virgin plate. Especially, the MDFs treated with chemicals showed the higher mean volatile organic compounds (VOCs) (0.188~0.333) g/L than that of virgin plate within the prescribed limits. Thus, It is supposed that the combustion- retardation properties were improved by the partial due to the treated chemicals in the virgin MDF.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.869-879
• /
• 2021

Methods for the development of home meal replacement seafood tailored to consumer needs for the advanced use of Broughton's ribbed ark Scapharca broughtonii (BRA) in Korea are required. In this study, we developed a cheese-topped, semi-dried, and seasoned Broughton's ribbed ark (S-BRA) tailored for the younger generation with an improved texture and fish odor. The optimization of conditions to improve the texture and fish odor was performed using RSM. The design of the model was appropriate because there was no significant difference (P>0.05) between the predicted and actual values of moisture content, hardness, and overall acceptance, and the optimal preparation conditions were a vinegar content of 2.68%, a soaking time of 62 min, a drying temperature of 60℃, and a time of 162 min. The S-BRA manufactured under these optimal conditions exhibited a lower odor intensity compared to the unsoaked and undried control, suggesting that the fish odor of S-BRA has been improved. The moisture content related to the texture of the S-BRA was lower than that of the control, and the hardness was higher. Therefore, the S-BRA developed in this study will appeal to people of all ages, especially the younger generation; their consumption is expected to increase.

• CELLMED
• /
• v.11 no.4
• /
• pp.21.1-21.9
• /
• 2021

Background: Unani System of Medicine (USM) has its origin to Greece. To ensure and develop the quality, authenticity of Unani drugs, standardization on modern analytical parameter is essential requirement for drugs. Objectives: The aimed of the present study was to develop a standard profile of "Qurṣ-e-Mafasil" by systematic study through authenticated ingredients, pharmacognostic identification followed by physicochemical, TLC, HPTLC fingerprinting analysis as per standard protocol. Material and Methods: In this study three batches of "Qurṣ-e-Mafasil" QM were prepared by standard method as per UPI had been followed by organoleptic properties of formulation such as appearance, color, odor, taste. Powder Microscopy and physicochemical studies were carried out such as Uniformity of weight, Friability, Disintegration time, hardness, LOD, ash vales and extractive values in like aqueous, alcohol & hexane. Further qualitative tests such as Thin-Layer Chromatography (TLC), and High-Performance Thin Layer Chromatography (HPTLC) studies were also carried out to develop fingerprint pattern of the alcoholic solvent extract of QM. Phytochemical screening was carried out in different solvent extracts such as alcoholic, aqueous and chloroform extracts to detect the presence phytoconstituents in the formulation QM. Heavy metals, Microbial Load Contamination and pesticidal residues were also determined. Results: Qurṣ-e-Mafasil showed tablet-like appearance, light brown colour, mild pungent odour and acrid taste. Uniformity of weight (mg), friability (rpm), and hardness (kg/cm) and disintegration time was ranged between (500 to 503), (0.0340 to 0.038), (8.40 to 8.67) and (4-5 minutes) respectively for the three batches. Loss in weight on drying at 105℃ was ranged between (8.3425 to 8.7346). Extracted values were calculated in distilled water ranged between (30.9091 to 31.4358), hexane (1.1419 to 1.4281), and alcohol (3.3352 to 3.3962). The ash values recorded were ranged between (3.7336 to 3.8378), and acid insoluble ash (0.5859 to 0.6112).

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.20-31
• /
• 2024

Purpose: Research and development of high-strength concrete enables high-rise buildings and reduces the self-weight of the structure by reducing the cross-section, thereby reducing the thickness of beams and slabs to build more floors. A large effective space can be secured and the amount of reinforcement and concrete used to designate the base surface can be reduced. Method: In terms of field construction and quality, the effect of reducing the occurrence of drying shrinkage can be confirmed by studying the combination of low water bonding ratio and minimizing bleeding on the concrete surface. Result: The ease of site construction was confirmed due to the high self-charging property due to the increased fluidity by using high-performance water reducing agents, and the advantage of shortening the time to remove the formwork by expressing the early strength of concrete was confirmed. These experimental results show that the field application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher can be expanded in high-rise buildings. Through this study, we experimented and evaluated whether ultra-high-strength concrete with a strength of 130 MPa or higher, considering the applicability of high-rise buildings with more than 120 floors in Korea, could be applied in the field. Conclusion: This study found the optimal mixing ratio studied by various methods of indoor basic experiments to confirm the applicability of ultra-high strength, produced 130MPa ultra-high strength concrete at a ready-mixed concrete factory similar to the real size, and tested the applicability of concrete to the fluidity and strength expression and hydration heat.