• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.229-244
• /
• 1998

This study was performed to determine proper fan and heater management schemes for natural air drying of rough rice in round steel bin with stirring device under Korean weather conditions. A computer simulation model was developed to predict moisture content changes, energy requirements, and drymatter losses during drying of rough rice by natural air. Drying test was conducted to validate the simulation model using round steel bin of holding capacity of 300ton at Rice Processing Complex in Jincheon. The bin was filled with rough rice every day and mixing by stirring device. Moisture contents, ambient air temperatures, relative humidities, static pressures in plenum chamber in the bin, airflow rates, and electrical and fuel energy were measured. Relative errors of moisture content changes predicted by the simulation model were below 5ft, and relative errors of final moisture content, final grain weight, required energy ranged from 0.9% to 6%. These not levels indicated that the simulation model can satisfactorily predict the performance factors of natural air drying system such as drying rates and energr consumptions comparing error level of 10% to 15% in other drying simulation models generally used in dryer desists. Twelve different fan and heater management schemes were evaluated using the computer simulation model based on three hourly weather data from Suweon for the period of 1952-1994. The best management schemes were selected comparing the drymatter losses, required drying times, required energy consumptions. Operating fan without heating only when ambient relative humidity was below 85% or 90% appeared to be the most effective method of In operation in favorable drying weather. Under adverse drying climates or to reduce required drying time, operating fan continuously, and heating air with $1.5^{\circ}C$ temperature rise only when ambient relative humidity was over 85% appeared to be the most suitable method.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.896-905
• /
• 1993

Thin-layers of wheat and barley are dried at near-ambient temperatures(3.5$^{\circ}C$ -5$0^{\circ}C$) in order to obtain the intrinsic drying data. The well established apparatus was modified to enable it to record all the sample weight data in still air by using a purpose -built automatically controlled sliding valve. The air could be diverted in less than 0.5seconds and a 7 second period was required to attain a steady weight reading. With this apparatus, very smooth drying curves were obtained. The data of sample weight , drying temperature and dew point temperature wee recorded continuously . The drying process was terminated when the moisture content change in 24 hours was less than 0.004 d.b. This was achieved by drying a sample for about a week . The final points were recorded as the dynamic equilibrium moisture content(EMC). The drying data were than fitted to the exponential Newton model and the dynamic EMC data were fitted to the Modified-Chung-Pfost Model . All the fitted parameters are given and comparison is made with previous published data. The comparisons who that the current drying constants are lower than the previous data, the dynamic EMC data obtained for wheat and barely agree with the previous data. The results show that to obtain the drying constant in the exponential Newton model, adequate drying time is necessary.

• Preventive Nutrition and Food Science
• /
• 제13권3호
• /
• pp.225-230
• /
• 2008

Onion slices were dehydrated in a single layer at drying air temperatures ranging from $50{\sim}70^{\circ}C$ in a laboratory scale convective hot-air dryer at an air velocity of 0.66 m/s. The effect of drying air temperature on the drying kinetic characteristics were determined. It was found that onion slices would dry within $210{\sim}460\;min$ under these drying conditions. Moisture transfer during dehydration was described by applying the Fick's diffusion model and the effective diffusivity changed between $1.345{\times}10^{-8}$ and $2.658{\times}10^{-8}\;m^2/s$. A non-linear regression procedure was used to fit 9 thin layer drying models available in the literature to the experimental drying curves. The Logarithmic model provided a better fit to the experimental drying data as compared to other models. Temperature dependency of the effective diffusivity during the hot-air drying process obeyed the Arrhenius relationship with estimated activation energy being 31.36 kJ/mol. The effect of the drying air temperature on the drying model constants and coefficients were also determined.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.132-137
• /
• 1993

In this paper, a fish drying process control system is proposed, which predicts the proper change with time in weight of the material fish and the drying conditions in advance, based on the performance of skilled worker. In order to implement a human expertise into an automated fish drying process control system, an experimental analysis is made and a model for the process is built. The proposed system divided into two procedures: The procedure before drying and the one during drying. The procedure before drying is for the prediction of necessary drying time. To estimate the necessary drying time, first, the proper change in weight for the product is obtained by using fuzzy reasoning. The condition part of the production rule consists of the factors of fish body and the expected degree of dryness. Kext, the necessary drying time is obtained by regression models. The variables employed in the models are the factors, inferred change in weight and drying conditions. The model for the procedure during drying is also proposed for more accurate estimation, which is described by a system of linear-differential equations.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.36-43
• /
• 2012

Purpose: Drying characteristics of the sliced carrot and green pumpkin were investigated by using the waste heat dryer. Methods: The effects of drying temperature ($T$) and slice thickness affecting drying time were analyzed. Mathematical models for the drying curves were determined with statistical analysis of drying data. Effective diffusivity was determined for the slices of carrot and green pumpkin under various drying conditions. Results: Drying time was reduced at the drying conditions of thinner slice and higher drying temperature. Moisture ratio ($MR$) according to drying time ($t$) was well presented as an exponential function at all of drying conditions for the slices of carrot and green pumpkin with the determination coefficient ($r^2$) of >0.99. The values of effective diffusivity ($D_{ff}$) of the slices for carrot and green pumpkin were increased with increasing the drying temperature. The relationship between Ln($D_{ff}$) and $1/T$ was linear with the determination coefficient ($r^2$) of >0.97. Conclusions: Drying model was well established as an exponential function at all of drying conditions for drying samples.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.138-143
• /
• 2015

This paper was aimed to study the drying kinetics of coffee and to investigate the thin-layer drying kinetics of coffee by using a convective air dryer. The coffee was dried for the temperatures of 40, 50 and $60^{\circ}C$ with relative humidity in the range of 14-25% the airflow rate fixed at 1 m/s. According to the experiment result, the drying rate curve showed that drying process took place only in the falling rate period. Seven thin layer drying models (Newton, Page, Henderson and Pabis, Logarithmic, Wang and Singh, Two terms, Modified Henderson and Pabis) were fitted to the experimental moisture content data. The Two-trem model was found to be a better model for describing the characteristics of coffee for the temperatures of 40, 50 and $60^{\circ}C$. The effective moisture diffusivity of coffee increased when the drying temperature increased. The value was in the range of $4.5028{\times}10^{-11}$ to $6.4803{\times}10^{-11}m^2/s$.

• 농업과학연구
• /
• 제47권3호
• /
• pp.519-532
• /
• 2020

Because lotus root has a short shelf life, the quality easily deteriorates. Thus, the harvested lotus roots are processed into a variety of products. Drying is one of the simplest food preservation methods, which can increase food stability. However, the convective drying method takes a long time and requires high energy consumption. Combination drying methods have emerged to overcome the limitations of the convective drying method. This study investigated the drying characteristics of lotus root and determined the optimal drying model of lotus root depending on the microwave and hot-air combination drying conditions. The lotus root slices (5 mm in thickness and 40 mm in diameter) were dried by different drying conditions that were combined with three microwave power levels (50, 100, and 150 W) and two hot air temperatures (50 and 60℃) at a velocity of 5 m·s^-1. Eight drying models were tested to evaluate the fit to the experimental drying data, and the effective moisture diffusion (D_eff) values of the lotus root slices dried by combination drying were estimated. The combination drying time of the lotus root was significantly reduced with the high air temperature and microwave power. The effective moisture diffusion (D_eff) of lotus root was more affected by the air temperature than microwave power intensity. Logarithmic model was most suitable to describe the drying curve of lotus root in the microwave-hot air combination drying method.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.863-877
• /
• 1996

A drying model to predict the drying process in continuous dryer was developed and proved by drying experiments. The experiment showed that the difference of moisture contents between the predicted and the observed was within 0.5%(wb). There was no cracked rice found even in high drying rate with the inlet moisture content over 23%(wb), and tempering treatment in the same temperature reduced the ratio of cracked rice. There was a little difference in the ratio of cracked rice between 40$^{\circ}C$ and 45$^{\circ}C$ drying temperatures with the final drying moisture content (14.5% wb), and the cracked rice increased at 55$^{\circ}C$. As a results, it was better to make fast drying on the rice over 23%(wb) inlet content it was recommended to keep drying at 45$^{\circ}C$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2268-2273
• /
• 2008

The drying model has been used to obtain the fundamental information required to design the heat pump dryer with the simple thermodynamic model. In the model, the input conditions are crucial to obtain the acceptable results. The model includes one-stage heat pump cycle, simple drying process using the drying efficiency. The drying efficiency is defined with the conditions of inlet and outlet in the dryer. The experiment has been carried out in the pilot dryer with one-stage heat pump cycle. Refrigerant 134a is used in the heat pump cycle. In the dryer, some of drying air flows through the heat pump system and the rest of air bypasses the heat pump system and circulates through the drying chamber. Some operating conditions from the pilot dryer are used as input conditions of the model and the results are compared with experimental results for the validation.