• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1999

The effect of fire-retardant treatment and redrying on the mechanical properties of radiata pine sapwood were evaluated. Small, clear specimens were treated with three different fire-retardant(FR) chemicals, borax-boric acid(BRX), minalith(MIN), and pyresote(PYR), with target retentions of 30 and 60kg/$m^3$, and then redried at maximum dry-bulb temperature of $25^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ or $110^{\circ}C$. Each specimen, including untreated and water-treated controls, was tested in static bending and in compression parallel to grain. The extent of strength reduction was dependent on the type of FR chemicals, retention, and redrying temperature, and a highly significant interaction existed between FR treatment and redrying temperature. Modulus of rupture(MOR) and work to maximum load(WML) were significantly decreased by FR treatment and redrying. None of three FR chemicals adversely affect modulus of elasticity (MOE) and maximum crushing strength(MCS). MOE of BRX treatment and MCS of both BRX and PYR treatment increased significantly compared to untreated controls. No significant differences existed between retention levels except for MOE and MCS of some combinations of FR chemicals and redrying temperatures. Although MOE and MCS was not significantly affected by any of the redrying temperatures, these properties were generally decreased with the increase in redrying temperature. The significant reduction in MOR and WML was observed in BRX treatment when dried at temperatures of $60^{\circ}C$ and above, and in MIN and PYR treatment when dried at temperatures of $80^{\circ}C$ and above. Consequently, BRX-treated radiata pine should not be redried at temperatures >$60^{\circ}C$, and MIN- and PYR-treated radiata pine should not be redried at temperatures > $80^{\circ}C$ where bending strength and energy-related properties are important design considerations.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.255-265
• /
• 1999

CTD castings and current observations are taken in June, July and October, 1997 and May and July, 1998 to investigate the effect of the Keum River dyke on the structure of physical properties and the type of the Keum River estuary. Tide and tidal current relation shows that the ebbing is longer than the flooding by 1.5 hours with the early current reversing before high tide. In the rainy season (May to July), frequent large fresh water discharge during the ebbing from the dyke changes vertical salinity difference and time variation of salinity greatly near the head of the estuary, where salinity becomes lower than 2‰ in summer fresh water flooding. Halocline developed by the fresh water discharge makes two-layer structure, of which strength and depth increase in the low tide. The relationship between tide phase and surface salinity variation shows the phase lag of 2.5 hours near the head of the estuary but the standing wave relation down the estuary. This phase lag implies that a low salinity water diluted by the fresh water discharge for 2-3 hours in the ebb period moves with tidal excursion. In the dry season, vertical salinity difference reduces significantly. We calculate stratification and circulation parameters using the observed salinity structure, surface current and fresh water discharge. The Keum River estuary shows a partially mixed type, changing the stratification parameter from the rainy to the dry season. Mean flows of observed tidal current at lower and upper layer are landward and seaward, which are consistent with the circulation of a partially mixed estuary. Based upon the estuary type and circulation we suggest that the suspended materials will move toward the upstream due to low-layer mean flow and then the Keum River estuary will be a deposit environment.

• Korean Journal of Poultry Science
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2010

An experiment was conducted to investigate the effect of dietary supplementation of rare earth, individually and in combination with colloidal silver on growth performance, nutrient digestibility, carcass characteristics and immune response in broiler chicks. A total of 3,872 day-old chicks were randomly allotted to four dietary treatments in a randomized complete block design. There were four pens per treatment and 242 chicks per pen. The dietary treatments were T1) CON (control diet), T2) colloidal silver (control diet+20 ppb colloidal silver), T3) rare earth elements (control diet+500 ppm rare earth), T4) colloidal silver +rare earth elements (control diet+20 ppb colloidal silver+500 ppm rare earth). There were no significant differences in feed intake and feed conversion ratio (FCR) among dietary treatments during the whole experimental period (0 to 5 weeks). Body weight gain was greatest in birds fed T3 and T4 diets (p<0.01). Apparent digestibility of dry matter, crude protein, ether extract and calcium were greatest in birds fed T4 diet (p<0.05), while apparent digestibility of phosphorus was lowest in birds fed T3 diet (p<0.05). There was no significant difference in bone strength, carcass characteristics and immune response among dietary treatments. Dry matter content of bone was greatest in birds fed T4 diet (p<0.05), and phosphorus content of bone was greater in birds fed T3 diet than in birds fed T2 and T4 diets (p<0.05). Thus, the results of this study suggest that rare earth elements supplementation, individually and in combination with colloidal silver could improve performance of broilers.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.973-979
• /
• 2010

The objective of this study was to determine the effect of electrical conductivity (EC) of nutrient solution on the growth, nutrient uptake of potted kalanchoe plants ($Kalanchoe$ $blossfeldiana$ 'New Alter') and the nutrient accumulation at the growing media with growth stage in ebb and flow subirrigation systems. Significant differences in leaf area, plant height, and dry weight of the plants were found among the different ECs of nutrient solution of 0.8, 1.6, 2.4, and $3.2dS{\cdot}m^{-1}$. Particularly the difference in plant growth became significantly greater from 5 weeks after treatment. The overall growth was the highest at EC $1.6dS{\cdot}m^{-1}$. Leaf area, plant height, and dry weight were maintained higher when EC increased to $2.4dS{\cdot}m^{-1}$, but rapidly decreased after EC $3.2dS{\cdot}m^{-1}$. The uptake of NO3-N was the greatest while that of $Mg^{2+}$ was the lowest at EC $1.6dS{\cdot}m^{-1}$, even though small differences were found among macro elements. The EC at the top layer of the growing media was 1 to 3 times higher than that at the bottom layer. Nutrient accumulation was accelerated in both the top and bottom layers with growth stage. At EC $3.2dS{\cdot}m^{-1}$, the growth of the plants was suppressed due to higher nutrient accumulation at the growing media. From the results, the strength and composition of nutrient solution should be determined by considering nutrient accumulation at the growing media in addition to EC of nutrient solution in ebb and flow subirrigation systems.

• The Journal of Korean society of community based occupational therapy
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2013

Objective : This study investigates the impact of the musculoskeletal disorder prevention exercise program designed on the basis of agricultural work posture on the balance ability, Oswestry Disability level, and Psychosocial stress of participants from one rural village in Chungnam area. Method : The exercise program was provided to 21 farmers with musculoskeletal symptoms living in one village in Chungnam area. Such program was performed once a week, 90 minutes per session, for a total of twelve weeks from July 10 to October 11, 2008, and was constructed in a way to increase flexibility and muscular strength, taking agricultural work posture into account. The balance ability, Oswestry Disability Index, and Psychosocial Well-being Index scores were analyzed based on the data of 13 of the farmers who participated in the program for more than eight times and in all of the pre- and post-assessments. Result : Thirteen participants were all women who were 70.55(${\pm}6.78$) years old on average. Most of them were engaged in general dry-filed farming. The parts where they mainly felt the pain were low back(69.2%) and knees(61.5%), and 46.2% responded 'not healthy' to the question on the overall health status. The static balance ability when standing on the right foot significantly increased from the average 9.27(${\pm}5.53$) seconds before intervention to 14.22(${\pm}5.47$) seconds after intervention(p<.05). The Oswestry Disability Index showed a significant change, decreasing from the average 19.84(${\pm}6.89$) seconds to 14.38(${\pm}7.58$) seconds(p<.05). However, there was no change in the Psychosocial Well-being Index. Conclusion : This exercise program that has been conducted for the female farmers who are mainly engaged in the dry-filed farming has contributed to the improvement of their static ability and reduction of their Oswestry Disability Index scores. It is expected that the studies on the effects of the differentiated exercise programs depending on work characteristics will make progress in the future.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.275-284
• /
• 2000

This study was carried out to analyze the mechanical properties of soil and the slope stability on the fill slope of forest road constructed in the regions which consist of igneous and metamorphic rock area. The results were summarized as follows. 1) Soil type by Unified Soil Classification System(USCS) was classified as SW in soil slope, GP in weathered rock slope, GP in soft rock slope for both types of parent rock, but gravelly soil slopes in igneous and metamorphic rock area were classified as SP and GW, respectively. 2) Dry unit weight was $1.34g/cm^2{\sim}1.59g/cm^2$, specific gravity 0.57~0.61, and void ratio 0.66~0.93 in the case of igneous rock area, a dry unit weight was $1.35g/cm^2{\sim}1.51g/cm^2$, specific gravity 2.67~2.77, and void ratio 0.78~1.01 in the case of metamorphic rock area. 3) The strength parameters such as internal friction angle(${\phi}$) and cohesion(c) were selected and tested for slope stability analysis. ${\phi}$ and c of soil in igneous rock area were within the range of $29.51^{\circ}{\sim}41.82^{\circ}$ and $0.03kg/cm^2{\sim}0.38kg/cm^2$, respectively, and $21.43^{\circ}{\sim}41.43^{\circ}$ and $0.05kg/cm^2{\sim}0.44kg/cm^2$ in metamorphic rock area, respectively. 4) Result of the slope stability analysis of forest road showed that, in the weathered rock slope of igneous rock and the weathered rock and soil slope of metamorphic rock area, the possibility of slope failure was high as safety factor was below 1.0.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.23-28
• /
• 2011

Experiments were conducted to investigate the optimum concentration of the nutrient solution in strawberry 'Sulhyang' with hydroponics in relationship between root activity and nutrient concentrations. Nutrient solutions for strawberry, made by Yamazaki, were supplied EC 0.5, 1.0, 2.0 $dS{\cdot}m^{-1}$ during experiment period. Growth of shoot and root of strawberries grown in visible plastic pot was observed during experiment. Petiole length was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 2.0 and 0.5 $dS{\cdot}m^{-1}$. Leaf width was longest in plants grown in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Fruit length, fruit diameter, fruit weight and yield were higher in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ than 2.0 $dS{\cdot}m^{-1}$ treatment but, soluble solids of the fruit did not show statistical differences among treatments. Shoot dry weight was heaviest in EC 1.0 $dS{\cdot}m^{-1}$, followed by 0.5 and 2.0 $dS{\cdot}m^{-1}$. Root dry weight was heavier in EC 0.5 and 1.0 $dS{\cdot}m^{-1}$ but significantly light in 2.0 $dS{\cdot}m^{-1}$. pH of the drainage solution was elevated in low nutrient concentration and lowered in high concentration. Also root activity was high in low nutrient concentration and low in high concentration. As a result, the optimum EC for strawberry 'Sulhyang' was EC 1.0 $dS{\cdot}m^{-1}$ in this experiment. It was confirmed that there was high relationship between root activity and pH of drainage solution. This result will be utilized as an indicator for strawberry hydroponics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.119-126
• /
• 2009

This study investigated the fire resistance of RC columns applying Fiber addition method, Fire board attaching method, and Fire proof sparying method. The results were summarized as following. The test showed that increase of fiber content, as expected, decreased the fluidity of fresh concrete, but for the types of fiber, the specimens containing nylon(NY) was favorable. The incline of fiber content also affected on the air content of concrete, which the specimens adding polypropylene(PP) fiber was the lowest, followed by a less decrease in polyvinyl alchhol(PVA) and then NY respectively. For the compressive strength at 28days, it was over 50MPa and showed slight increasing tendency by rising fiber contents. After the fire test completed, control concrete exhibited the severe demage, while the specimens containing more than 0.05vol.% of PP and NY was able to protect from spalling. In the case of splay, the partly spalling occurred at the all finishing material, however the RC columns were protected from spalling. For the methods attached with boards, all RC columns were protected except the dry attaching method. The reduced weight ratio was favorable because it was below 8 % except for plain concrete.