• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.44-44
• /
• 2019

Spring sowing of ginseng seeds often results in failure of seedling establishment. Storage condition during winter, sowing time, and seed treatment might effect on germination. Here we tested effects of temperature regimes of seed storage on spring sowing. Dehisced wet or dry ginseng seeds were stored at $2^{\circ}C$, $-2^{\circ}C$, $-3.5^{\circ}C$, or alternating temperature: at $2^{\circ}C$ until December, $-3.5^{\circ}C$ in January, and $2^{\circ}C$ in February, and sowed in March. In overall, emergence rate was dependent on storage temperature, and $-3.5^{\circ}C$ resulted poorest emergence than other conditions. Storage of wet seeds in alternating temperature resulted highest emergence rate. Seed dry also affected on emergence rate, while it was dependent on the storage temperature. In terms of growth, storage at $2^{\circ}C$ as wet seed resulted highest growth, and dried seeds resulted poorer growth than wet seeds. As a modification of alternating temperature, seeds were stored at $2^{\circ}C$ at first, then transferred to $-3.5^{\circ}C$ at Nov 30, Dec 20, and Jan 10, each. When transfer date was delayed, emergence rate was increased. We suggest that seed storage temperature for ginseng should not be decreased below $-2^{\circ}C$, and alternative temperature regime for successful spring sowing could be useful.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.47-53
• /
• 2016

This study investigated natural convection flow behavior in airflow path designed in concrete dry storage cask to remove the decay heat from spent nuclear fuels. Using FLUENT 16.1 code, thermal analysis for natural convection was carried out for three dimensional, 1/4 symmetry model under the normal condition that inlet ducts are 100% open. The maximum temperatures on other components except the fuel regions were satisfied with allowable values suggested in nuclear regulation-1536. From velocity and temperature distributions along the flow direction, the flow behavior in horizontal duct of air inlet and outlet duct, annular flow-path and bent pipe was delineated in detail. Theses results will be used as the theoretical background for the composing of airflow path for the designing of passive heat removal system by understanding the flow phenomena in airflow path.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.5 no.4
• /
• pp.272-280
• /
• 1976

A natural ventilating type store was designed for the economic and effective storage of citrus fruits in Jejudo. The material used for the wall is scoria, widely distributed in Jejudo and known for high strength and insulation. Design condition was chosen for the period till March of a year and the dry bulb temperature was taken from TAC $5\%$ base. The temperature of the store can be maintained below the limiting temperature of $8^{\circ}C$ for the time length of $7\frac{1}{2}$ hours under the condition of the atmospheric temp, $15.3^{\circ}C$ and the solar insolation. The limiting temperature can he recovered to the initial temperature $(7^{\circ}C)$ by the natural ventilation for 8 hours in the night.

• Journal of Radiation Protection and Research
• /
• v.37 no.4
• /
• pp.197-201
• /
• 2012

Annual dose at the boundary of the interim storage facility at normal condition was calculated to estimate the site area of the facility of PWR spent nuclear fuel. In this work, source term was generated by ORIGEN-ARP for 4.5 wt% initial enrichment, 45,000 MWd/MTU burnup and 10 years cooling time. Modeling of the storage facilities and radiation shielding evaluations were conducted by MCNP code depending on the storage capacity. In the case of the centralized storage system, the required site area was found to have the radius of more than 700 m.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.136-141
• /
• 1998

To give some information on the harvest and storage of Chinese yam (Dioscorea opposita), the experiment was done to examine the effect of its harvesting date and storage method on tuber weight, tuberrelated characters during the storageor at the end of storage. The yam tubers harvested 4 times at 20 days interval from Oct. 15 were stored with different storage methods(pit, room and cold temperature) and on Mar.15. all the characters were measured. Fresh weight of the tuber harvestedafter Nov. 5 and stored were greater than that done on Oct. 15 while dry tuber weight did not have any difference between the harvesting dates. The fresh weigth done directly from the field on Mar. 15 was higher compared to the other harvesting dates owing to its higher moisture content. The rate of sound tuber stored at room or cold temperature condition was higher than that at the field at which the rate was greater at the harvest after late nov. compared to the earlier harvests. Although the two storages were similar at sound tuber rates and marketable yield, the tuber weight was more reduced when stored at room temperature than when done at cold temperature . Brightness and value 'b' of chromaticaity realted to the tuber coloring and sugar content were higher but moisture content was lowerwhen harvested on Oct. 15 than the other havesting dates. All the characteristics realted to the marketability after storage were nearly same when stored at room and cold temperature. Value 'a' of chromaticity and sugar content were higher when harvest on Mar. 15 than when harvested before Dec. 15 but the 'b' value and mositure content were reverse results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.383-389
• /
• 2005

This research is to develop a seismic response analysis method for a spent fuel storage cask. FEM model is built for the test model of 1/8 scale spent fuel dry storage cask using available 3D contact conditions in ABAQUS/Explicit. Input load for this analysis os a seismic wave of El-centro earthquake, and the friction and damping coefficients in the analysis condition we obtained from the test result. Penalty and kinematic contact methods of ABAQUS are used for mechanical contact formulation. The analysis method was verified for rocking angle obtained by seismic response tests. The kinematic contact method with an adequate normal contact stiffness showed a good agreement with tests.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.237-246
• /
• 2005

A tip-over test of the 1/3 scale model is conducted to verify the tip-oner analysis of a dry concrete storage cask under a hypothetical accident condition. The tip-oner analysis is executed using the velocity at each point which are determined from the initial angular velocity as the initial conditions of the model just before the impact. To confirm the structural integrity of the canister of a dry concrete storage cask, the non-detective testing such as Liquid Penetrants testing and Ultrasonic Testing are conducted. The strains and tile accelerations acquired by the tip-over test are compared with those by the analysis to verify the tip-over analysis. The lid of a storage calk are plastically deformed at the impact point. Liquid

• Korean Journal of Weed Science
• /
• v.16 no.2
• /
• pp.114-121
• /
• 1996

This study was conducted to investigate seed germination, seedling growth, and responses to herbicides of Bidens tripartita L. When the field-collected seeds were stored under a dry-room temperature, dry-low temperature, wet-low temperature, or dry-high temperature condition, no seeds were germinated in a growth chamber with 14 hr photoperiod up to 35 days after the storage. Exceptionally, however, some seeds stored under a wet-room temperature condition were germinated after 25 days of the storage. This might be due to the fact that the seed coats were damaged by fungi which developed during the storage. Seeds stored under a wet-low temperature condition (stratification) began to be germinated after 3 months of the storage and the germination rate increased with a prolonged stratification. Almost all seeds were germinated after 9 months of the stratification. These results suggest that the dormancy of B. tripartita L. seeds relate to the seed coat and thus several attempts were made to induce seed germination through damaging or weakening the seed coat. Freezing($-20^{\circ}C$), drying($100^{\circ}C$), or swelling($40^{\circ}C$) of the seeds was not effective to induce the germination. Treatments of concentrated sulfuric acid, $KNO_3$, or gibberellin to the seeds had no effect on inducing the germination. However, ethrel had a stimulatory effect on the germination of the seeds with an optimum concentration of 250ppm. A seed cutting was also effective to induce the germination, but seedlings from the seeds had cutted cotyledons. Germination of the stratified seeds varied with the temperature condition to which they were subjected, but not with light. The germination rate was the highest at 35 - $40^{\circ}C$. Although the seeds were not able to germinate under a submerged condition, seedlings after 2-leaf-stage exhibited better growth under a submerged or a subirrigated condition than under an upland condition. Among the herbicides tested, pyrazosulfuton-ethyl, linuron, and bentazone were found to be effective for controlling B. tripartita L., having more herbicidal effect with an earlier application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.401-407
• /
• 2006

This study was conducted to investigate the effect of onion cultivation under paddy and upland condition on the yield and storage of onion bulbs. In comparison of soil conditions, nitrogen, phosphate, potassium content and average temperature in upland condition were higher than those of paddy condition, but calcium, magnesium, sodium and water content in paddy condition were higher than those of upland condition. The growth of aerial part was better in upland cultivated condition. It showed that bulb formation in paddy cultivated condition was faster during in early growth stage, but was slower during in late growth stage. Average bulb size and weight were higher in upland cultivated condition, but dry weight per 100 g fresh weight and bulb hardness were higher in paddy cultivated condition. Sugar contents, inorganic compounds, nitrogen, phosphate and potassium content of onion were higher in upland cultivated condition, but calcium, magnesium and sodium content of onion were higher in paddy cultivated condition. In distribution of onion bulb size, most of large sized onions were produced in upland cultivated condition. Average bulb production for seed harvesting were $63{\sim}70%$ higher in paddy cultivated condition than that of upland cultivated condition. The rotted rate of onion was about $27.2{\sim}34.6%$ in paddy, $37.5{\sim}51.4%$ in upland cultivated condition respectively, showed favorable result as the difference of $8.7{\sim}24.2%$ in paddy cultivated condition.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.107-112
• /
• 2018

Objective: The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. Methods: Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting in a total of six groups. Each stainless steel and fiber-reinforced composite group was comprised of six specimens. The three-point bending flexural test was conducted using a universal testing machine. ANOVA was used to assess differences in the maximum load and maximum stress according to the span length, material, and storage condition. Post-hoc comparisons were performed if necessary. Results: The maximum stress and maximum load were significantly (p < 0.001) associated with the span length, material, and storage condition. The significant interaction between the material and span length (p < 0.001) indicated the differential effects of the material for each span length on the maximum stress and maximum load, with the difference between materials being the highest for the maximum span length. Conclusions: Our findings suggest that fiber-reinforced composite retainers may be an effective alternative for orthodontic retention in patients with esthetic concerns or allergy to conventional stainless steel wires.