• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.415-423
• /
• 2006

콘크리트용 골재로 양질의 골재가 부족함에 따라 대체 골재의 개발이 요구되어, 현재에는 대체 골재로서 부순모래가 가장 많이 사용되고 있으며, 그 사용량은 더욱 늘어날 전망이다. 국내에서는 대부분의 회사가 습식공정으로 부순모래를 생산하지만, 지역적인 조건과 부지의 제약에 의해서 건식 공정으로 부순모래를 생산하는 회사도 있다. 본 연구에서는 건식 공정 부순모래의 콘크리트의 적용성을 평가하기 위한 기초적인 연구로서, 건식공정으로 부순모래를 생산하고 있는 회사의 제조 설비를 분석하고, 부순모래를 대상으로 한국산업규격에 의거하여 품질특성 시험을 실시하였으며, 그 결과를 바탕으로 부순모래를 바다모래에 대체하여 콘크리트 실험을 실시하였다. 실험 결과, 건식 부순모래 품질 특성 중에서 0.08mm 체 통과량이 KS 규정을 초과하였으며, 조립률도 천연모래에 비하여 다소 높게 나타났고, 다른 물리적 특성은 바다 모래와 유사하였다. 콘크리트 실험에서는 부순모래의 대체율이 증가함에 따라 슬럼프와 공기량이 미립분량 증가에 의해서 감소하였으며, 단위용적질량, 압축강도, 인장강도는 증가하는 것으로 나타났다. 따라서 건식 부순모래의 미립분 함유량을 감소시키면 콘크리트용 골재로서 사용하는 데에는 큰 문제가 없을 것으로 판단되며, 향후 건식공정으로 생산한 부순모래의 사용량도 증대될 것으로 전망된다.

• Nuclear Engineering and Technology
• /
• 제32권5호
• /
• pp.495-503
• /
• 2000

The hydraulic conductivities in the bentonite-sand mixtures with high density were measured, and the effects of sand content and dry density on the hydraulic conductivity were investigated. The hydraulic conductivities of the bentonite-sand mixtures with a dry density of 1.6 Mg/㎥ and 1.8 Mg/㎥ are less than 10$^{-11}$ m/s when the sand content is not higher than 70 wt%. However at the sand content of 90 wt%, the hydraulic conductivity increases rapidly At the same dry density, the logarithm of hydraulic conductivity increases linearly with increasing sand content. The hydraulic conductivity of the bentonite-sand mixture can be explained by the concept of effective clay dry density, and using this concept, the hydraulic conductivities for the mixtures with various sand contents and dry densities can be estimated.

• 한국주조공학회지
• /
• 제2권1호
• /
• pp.2-11
• /
• 1982

In order to investigate the relationship between the thermal characteristics of the various molds as green sand mold, dry sand mold, $CO_2$ mold and shell mold, and the solidification characteristics of molten metal, the thermal analysis of rarious molds and melt were performed. The structure of Al-Castings was a/so observed. Results obtained in this experiment were as follows : 1) The heating rate of the molds was increased in the order of green sand mold, $CO_2$ mold, dry sand mold and shell mold, On the other hand the solidification time of the melts was shortened in the order of dry sand mold castings, $CO_2$ mold castings, green sand mold castings and shell mold castings. 2) The arrest temperature period in the heating curve of the green sand mold was resulted from the eraporation of moisture contained in mold, which was transfered to the outer side of the mold. 3) The temperature fluctuation of the melt in the shell mold was considered to be resulted from the combution heat of resin contained in the mold. 4) The amounts of heat absorption of the molds were increased in the order of dry sand mold, $CO_2$ mold, green sand mold and shell mold. 5) The higher the solidification rate was, the longer was its shrinkage pipe and the finer its grain size.

• 한국대기환경학회지
• /
• 제14권3호
• /
• pp.191-208
• /
• 1998

Estimations of dry and wet depositions in Korea and the size distributions of yellow sand above Korea have been carried out using the Eulerian aerosol model with the simulated meteorological data from the SNU mesoscale meteorological model. The estimated particle size distribution in Korea shows a bimodal distribution with peak values at 0.6 pm and 7 pm and a minimum at 2 pm in the lower layer However, as higher up, the bimodal distribution becomes an unimodal distribution with a peak value at 4∼5mm. Among the total amount of yellow sand deflated in the source regions , the dry and wet deposition fluxes were about 92%, and about 1.3∼0.5%, repectively, and the rest(5∼6%) is suspended in the air, Most of dust lifted in the air during the clear weather is deposited in the vicinity of the source regions by dry deposition and the rest undergoes the long -range transport with a gradual removal by the wet deposition processes. Over Korean peninsula, the total amount of yellow sand suspended in the air was about 6∼8% of the emissions in the source region and the dry and wet deposition fluxes were about 0.005∼0.7% and 0.003∼0.051% of the total emitted amount, repectively. It is estimated that 2.7∼8.9 mesa-tons of yellow sand is transported annually over the Korean peninsula with the annual mean dry deposition of 2.1∼490 kilo-tons and the annual mean wet deposition of 1.5∼65 kilo-tons.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.29-44
• /
• 2010

Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios which was underlain by either rigid concrete base, under both dry and saturated condition. The effect of saturation on the damping ratio of finite sand stratum underlain by a rigid base has been verified and compared with the results obtained for the case of finite dry sand stratum underlain by the rigid base. Comparison of results of the experimental study showed that the damping in both the cases is less than 10%. The damping ratio obtained for finite saturated sand stratum is marginally lower than that obtained on finite dry sand stratum at H/B ratio of 0.5. The difference between the two cases becomes significant when the H/B ratio increases to 3.0, indicating the significant influence of soil moisture on damping ratio of foundation- soil system with increase in the thickness of the finite sand stratum. Comparison of the predicted damping ratio for a homogeneous sand stratum with the experimental damping ratio obtained corresponding to the height to width ratio of 3.0 of the finite sand stratum underlain by the rigid concrete base indicates a significant reduction in damping ratio of the foundation-soil system for both the cases.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.391-396
• /
• 2007

공기와 모래를 이용한 건식 식기세척기를 주방에 설치하여 운전하였다. 실험을 위하여 30여종의 양념(Dirt 마커) 과 14종의 접시를 사용하였으며 세척효율은 COD-MN에 의해 평가하였다. 건식 공기세척은 일부 양념에는 효과적이었으나 일부 양념에는 전혀 효과가 없는 것으로 분석되었다. 또한 건식공기세척을 통해서 양념의 완벽한 제거는 불가능하였다. 접시의 형태에 따라 세척효율에 큰 차이를 보였다. 모래와 공기에 의한 세척은 COD-MN 제거에 탁월한 성능을 보였다. 본 연구를 통하여 물을 사용하지 않고 모래와 공기에 의한 건식세척 방법이 가능함이 입증되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.10-16
• /
• 1996

This study is aimed for investigating a decision of the saturated surface dry of crushed stone sand and measuring the moisture with increasing percentage of VFS(Very Fine Sand) replacement each crushed stone sand. The results indicated that moisture of crushed stone sand is generally increased with increasing percentage of VFS replacement and the rate of increase of moisture is about 30% every time that VFS replacement increases 3.5%. Also the saturated surface dry for crushed stone sane is proposed as a point of time where shape of flow-cone first slumps in this paper.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Global Environmental Problems and their Health Consequences
• /
• pp.92-106
• /
• 2004

Elemental dry deposition fluxes were measured using dry deposition plates from March to June 1998 in Seoul, Korea. During this spring sampling period several yellow sand events characterized by long-range transport from China and Mongolia impacted the area. Understanding the impact of yellow-sand events on atmospheric dry deposition is critical to managing the heavy metal levels in the environment in Korea. In this study, the measured flux of a primarily crustal metal, Al and an anthropogenic metal, Pb was used with two hybrid receptor models, potential source contribution function (PSCF) and residence time weighted concentration (RTWC) for locating sources of heavy metals associated with atmospheric dry deposition fluxes during the yellow-sand events in Seoul, Korea. The PSCF using a criterion value of the 75th percentile of the measured dry deposition fluxes and RTWC results using the measured elemental dry deposition fluxes agreed well and consistently showed that there were large potential source areas in the Gobi Desert in China and Mongolia and industrial areas near Tianjin, Tangshan, and Shenyang in China. Major industrial areas of Shenyang, Fushun, and Anshan, the Central China loess plateau, the Gobi Desert, and the Alaskan semi-desert in China were identified to be major source areas for the measured Pb flux in Seoul, Korea. For Al, the main industrial areas of Tangshan, Tianjin and Beijing, the Gobi Desert, the Alashan semi-desert, and the Central China loess plateau were found to be the major source areas. These results indicate that both anthropogenic sources such as industrial areas and natural sources such as deserts contribute to the high dry deposition fluxes of both Pb and Al in Seoul, Korea during yellow-sand events. RTWC resolved several high potential source areas. Modeling results indicated that the long-range transport of Al and Pb from China during yellow-sand events as well as non yellow-sand spring daytimes increased atmospheric dry deposition of heavy metals in Korea.

• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.55-60
• /
• 1988

A two year's field experiment was conducted on newly reclaimed saline tidal lands to measure the effects of sand mulching on salinity of the soils and their relationship to crop performance. Hybrid sorghum cv. Pioneer 931 was grown under different mulching treatments using of medium sand and red earth (Fine loamy, Typic Hapludults). Salinity in the root zone was decreased markedly under soil mulching using of medium sand, especially during the dry season, and it caused a great increase in the root growth and R/T ratio. Seasonal values of electrical conductivity at sand mulching were 6.6 in April and 1.6 mmhos in August, but it was still high with a concentration of 12.7 (April) and 3.8 mmhos (August) in untreated check plot. Sand mulching increased plant growth and the rate of dry matter accumulation. However, treatment of red earth additionally over sand mulching produced lower dry matter yield than those of soil mulching using of medium sand only. Under salt stress sorghum plant showed a decrease in the leaf weight ratio (LWR) and it resulted in a low concentration of crude protein of the plant. Sand mulching enhanced leaf weight ratio and rate of protein synthesis.

• 대한전자공학회논문지TC
• /
• 제37권5호
• /
• pp.17-24
• /
• 2000

자체 설계 및 제작된 개방단말 동축선 프로브를 이용하여 마른 모래의 복소 유전율을 측정하였다. 프로브의 간단한 교정 방안으로 순수한 물에 대해 측정된 반사계수와 수치계산한 반사계수간의 위상차를 모래에 대해 측정된 반사계수의 위상에 뺐다. 그 다음 마른 모래에 대해 측정된 반사계수를 개선된 가상의 동축선 모델에 대입하여 복소 유전율을 환산하였다. 동일한 마른 모래에 대해 측정된 정확한 측정자료와 비교함으로써 본 측정방법의 정확성을 입증하였다.