• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.55-61
• /
• 1994

Mn-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal ions of Fe2+, Mn2+ and Zn2+ with alkali solution. The target composition of the ferrite powder was 52 mol% Fe2O3, 24 mol% MnO, and 24 mol% ZnO, that was based on the region of high permeability. And the other ferrite powder was prepared by the dry method that was to be mixed the metal oxides as the above chemical composition. The wet method was compared with dry method for the powder properties and the electromagnetic characteristics of sintered cores. The synthesized powder by wet method was smaller particle size, narrower particle distribution, and higher purity than that of dry method. The initial permeability of sintered sample prepared by the wet method was 14000~28000, on the other side, 9000~15500 in case of the dry method.

• 한국농공학회지
• /
• 제11권4호
• /
• pp.1783-1790
• /
• 1969

It is one of the most economical method of soil stabilization works to compact soil, which increases soil density artificially. Compaction effort is to lessen void of soils, and consequently its aim is to enlarge friction and cohesion force, and reduce permeability of soil. Factors in compaction effort are moisture content, grain size, grain size distribution, physical properties, compaction method and temperature of soils etc. The results obtained in this study on the effects that grain size, gradation and physical properties influence upon compaction effort for 20 samples under the constant compaction method, are summarized as follows: 1. The bigger the maximum dry density is, the smaller the optimum moisture content is, on the other hand, the smaller the maximum dry densityis, the bigger the optimum moisture content is, ingeneral. 2. The coarser the grain size is, the bigger the maximum dry density is, and the optimum moisture content becomes small, and dry density-moisture content curve has the sharp peak, generally. Also, the finer the grain size is the smaller the maximum dry density is, and the optimum moisture content shows the big value, and dry density-moisture content curve has the dull peak. 3. The maximum dry density shows the biggest value on the sample to be about 15% of particles finer than No. 200 sieve. The more the percent passing of No. 10 sieve increase, the smaller the maximum dry density is. Soils which have uniformity coefficient less than 5 in particles larger than 0.074mm hardly show dry density-moisture content curve. 4. There is a relation which is ramax＝2.3948-0.0376 Wopt between the maximum dry density and the optimum moisture content, namely, the maximum dry density is increased in proportion to decrease of the optimum moisture content. 5. There are relations to be the straight lines which the maximum dry density decrease, on the other hand, the optimum moisture content increase in accordance with enlargement of Atterberg Limit(LL, PL, PL) in compacted soils.

• 한국잠사곤충학회지
• /
• 제13권1호
• /
• pp.73-78
• /
• 1971

본시험은 공정거래를 기할 수 있도록 진섬유량으로부터 생사의 거래중량을 산정할 수 있는 정량거래방법 을 구명하기 위한한 연구로서 다음과 같은 결과를 얻었다. 1. 거래중량인 정량은 원량에서 연감후무수량을 감한 연감수분량의 원량에 대한 백분률인 연감수분률로 부터 산정하면 생사의 진섬유량을 잘 나타낼 수 있고 재현성이 있어 현행검사보다 합리적이다. 2. 연감수분률로부터 정량을 산정함에 있어서 연감후무수량에 대한 공정가산률은 44%로 함이 적당하다고 판단된다. 3. 섬도검사 잔사인 섬도사의 연감률과 하구의 연감률을 대표할 수 있을 것으로 생각되는 시료사(24타래) 의 연감률 사이에 통계적인 유의차가 없었으므로 섬도사의 연감률은 하구의 연감률을 대표할 수 있다. 4. 우리나라는 연감수분율검사에 의한 정량검사를 실시하면 약 2억원의 이득을 얻을 수 있다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2418-2426
• /
• 2022

The grouping analysis is a method guided by the Korea Radioactive Waste Agency for efficient analysis of radioactive waste for disposal. In this study, experiments to verify the adequacy of grouping analysis were conducted with radioactive soil, concrete, and dry active waste in similar environments. First, analysis results of the major radionuclide concentrations in individual waste samples were reviewed to evaluate whether wastes from similar environments correspond to a single waste stream. As a result, the soil and concrete waste were identified as a single waste stream because the distribution range of radionuclide concentrations was "within a factor of 10", the range that meet the criterion of the U.S. Nuclear Regulatory Commission for a single waste stream. On the other hand, the dry active waste was judged to correspond to distinct waste streams. Second, after analyzing the composite samples prepared by grouping the individual samples, the population means of the values of "composite sample analysis results/individual sample analysis results" were estimated at a 95% confidence level. The results showed that all evaluation values for soil and concrete waste were within the set reference values (0.1-10) when five-package and ten-package grouping analyses were conducted, verifying the adequacy of the grouping analysis.

• 한국화재소방학회논문지
• /
• 제32권3호
• /
• pp.1-7
• /
• 2018

본 연구는 ABC 분말소화약제와 제1인산암모늄의 열분해생성물이 목재표면에 미치는 영향에 대해 검토하였다. 목재표면에서 열분해 생성물을 제거하였을 때 제1인산암모늄은 점도가 높은 투명한 열분해 생성물이 눌어붙어 제거하기 힘들었으나 ABC 분말소화약제는 덩어리진 형태로 쉽게 제거되었다. 열분석 결과 각 시료의 열분해 특성은 유사하나 열분해 잔존물의 중량이 ABC 분말소화약제는 55.9%, 제1인산암모늄은 25.2%로 나타나 차이를 보였다. ABC 분말소화약제에 첨가된 첨가제가 열분해 잔존물의 중량 및 메타인산의 방신효과에도 영향을 미치는 것으로 나타났다.

• 한국광물학회지
• /
• 제23권3호
• /
• pp.227-234
• /
• 2010

본 연구에서는 라테라이트광의 건식 분쇄가 니켈 및 코발트의 침출에 미치는 영향을 조사하였다. 시료로 사용한 라테라이트광은 주로 $SiO_2$, $Fe_2O_3$, MgO로 이루어져 있으며, 니켈과 코발트의 함량은 0.81% Ni, 0.02% Co이었다. 주 구성 광물은 리자다이트와 석영이며, 미량의 포스터라이트와 엔스터타이트를 함유하고 있었다. 분쇄가 진행됨에 따라 시료의 평균입도, 비표면적, 밀도는 감소하는 경향을 보였으며, X-선 회절분석을 통해 리자다이트의 비정질화가 진행됨을 확인하였다. 분쇄에 의한 석영의 물성변화는 나타나지 않았으나, 리자다이트의 Mg-OH 결합이 파괴됨으로써 니켈 및 코발트의 침출율이 향상됨을 알 수 있었다. 분쇄가 진행됨에 따라 니켈과 코발트의 침출율은 증가하였으며, 60분 분쇄한 시료의 경우, 사용한 무기산의 종류에 관계없이 니켈과 코발트의 침출율은 약 80%로 나타났다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1620-1620
• /
• 2001

Forages, both grazed and conserved, provide the basis of ruminant production systems throughout the world. More than 90 per cent of the feed energy consumed by herbivorous animals world - wide were provided by forages. With such world - wide dependence on forages, the economic and nutritional necessity of been able to characterize them in a meaningful way is vital. The characterization of forages for productive animals is becoming important for several reasons. Relative to conventional laboratory procedures, Near Infrared Reflectance Spectroscopy (NIRS) offers advantages of simplicity, speed, reduced chemical waste, and more cost-effective prediction of product functionality. NIR spectroscopy represents a radical departure from conventional analytical methods, in that entire sample of forage is characterized in terms of its absorption properties in the near infrared region, rather than separate subsamples being treated with various chemicals to isolate specific components. This forces the analyst to abandon his/her traditional narrow focus on the sample (one analyte at a time) and to take a broader view of the relationship between components within the sample and between the sample and the population from which it comes. forage is usually analysed by NIRS in dry and ground presentation. Initial success of NIRS analysis of coarse forages suggest a need to better understand the potential for analysis of minimally processed samples. Preparation costs and possible compositional alterations could be reduced by samples presented to the instrument in undried and unground conditions. NIRS has gained widespread acceptance for the analysis of forage quality constituents on dry material, however little attention has been given to the use of NIRS for chemical determinations on undried and unground forages. Relatively few works reported the use of NIRS to determine quality parameters on undried materials, most of them on both grass and corn silage. Only two works have been found on the determination of quality parameters on fresh forages. The objectives of this paper were (1) to evaluate the use of NIRS for determination of nitrogen and moisture on undried and unground forage samples and (2) to explore two mathematical treatments and two NIR regions to predict chemical parameters on fresh forage. Four hundred forage samples (n: 400) were analysed in a NIRS 6500 instrument (NIR Systems, PA, USA) in reflectance mode. Two mathematical treatments were applied: 1,4,4,1 and 2,5,5,2. Predictive equations were developed using modified partial least squares (MPLS) with internal cross - validation. Coefficient of determination in calibration (${R^2}_{CAL}$) and standard error in cross-validation (SECV) for moisture were 0.92 (12.4) and 0.92 (12.4) for 1,4,4,1 and 2,5,5,2 respectively, on g $kg^{-1}$ dry weight. For crude protein NIRS calibration statistics yield a (${R^2}_{CAL}$) and (SECV) of 0.85 (19.8) and 0.85 (19.6) for 1,4,4,1 and 2,5,5,2 respectively, on a dry weight. It was concluded that NIRS is a suitable method to predict moisture and nitrogen on fresh forage without samples preparation.

• 한국포장학회지
• /
• 제23권1호
• /
• pp.27-36
• /
• 2017

오리엔탈 나리 '시베리아'의 건식저장 기간에 따른 절화 보존 시 수분함량 변화와 절화수명을 구명하고자 하였다. 본 실험에서 저장 기간에 따라 저온 저장($5^{\circ}C$)을 한 다음 절화수명에 관계된 수분 및 품질 변화와 개화 정도를 검토하여 '시베리아' 나리의 절화 수확 후 관리 기술에 관계된 기본적인 자료를 얻고자 하였다. '시베리아' 나리를 채화하여 저온에서 건식저장 기간에 따라 3일, 6일, 12일한 후 절화보존 동안에 생체중 변화, 수분균형, 개화정도 등을 조사하였으며 대조구로서 상온 건식저장과 비교하였다. 저온 건식저장 후에 '시베리아' 나리의 수분함량은 건식저장 기간에 영향을 받아 저장하는 기간이 짧을수록 높아져 저장 3일이 다른 처리구보다 높아지는 경향을 보였다. 꽃의 수분함량은 절화보존 시 지속적으로 증가하는데, 저장 기간이 짧을수록 수분이 높게 유지되었다. 생체중 변화는 건식저장 기간에 영향을 받아 저장 기간이 짧았던 것에서 생체중의 증가 정도가 컸으며 음(-)의 값에 이르는 기간이 늦어지는 것으로 나타났다. 또한 절화보존 시 생체중 변화는 저온 건식저장 3일이 생체중 증가 정도가 완만하게 변하며 수분균형도 8일째에 음(-)의 값에 도달하는 것으로 나타났다. 그러나 저장 온도 차이에 따른 생체중 변화는 상온에서 저장한 절화가 저온저장보다 증감 정도가 더 빠른 것으로 나타났다. 개화정도는 '시베리아' 나리의 건식저장 기간이 길어질수록 개화시기가 빨라지며, 절화가 빨리 시들어 상품으로써 유지 기간이 짧아졌다. 개화상태를 비교해 보면 3일 저온 건식저장이 다른 처리보다 개화하는 속도가 늦었으나 절화수명은 다른 처리구보다 길게 나타났다. '시베리아' 나리의 저온 건식저장은 저장 기간이 짧을수록 저장 후 수분함량이 높고 수분 균형값이 음(-)에 늦게 도달하였으며 개화상태가 좋고 절화수명도 길어지는 것으로 나타났다. '시베리아' 나리는 건식저장을 통한 작물체내 수분 함량 감소가 절화보존 시 개화 특성에도 영향을 미쳐 저장기간이 길수록 절화수명이 감소하여 상품 가치를 떨어뜨렸다. '시베리아' 나리 절화를 소비자가 이용 시, 상품 가치 유지를 위해서는 기존 결과의 6일 동안 저온 건식저장도 절화수명을 단축시키므로 저장 기간을 최소화하는 것이 절화 품질 유지를 위해 바람직하다고 판단된다.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.314-321
• /
• 2005

Objectives. The purpose of this study was to compare the shade changes in wet and dry conditions of natural teeth using two different intra-oral colorimeters. Materials and methods. Twenty volunteer subjects have no restorations and fillings in the maxillary central incisors were involved in this clinical study. The color of tooth was measured by two different instruments that were a Shade $Scan^{TM}$ System and a VITA $Easyshade^{(R)}$, Five times consecutive measurements were done for each subject with both instruments. Groups of measurement are an initial wet condition as control, dry in 5 minutes, 15 seconds after re-wetting with saliva, re-wetting after 5minutes and re-wetting after 30 minutes. Using ShadeScan $System^{TM}$, tooth image was captured and converted to the mapping image of Vitapan 3D master. Three main shades were chosen from each subject and calculated the area in Global Lab Image software. Data were analyzed using paired T-Test and Wilcoxon Signed Ranked Test. Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between measurements were analyzed with one sample T-test. Results. Using ShadeScan $System^{TM}$, there were significant differences between control group and dry(P=.023), dry and re-wetting 15 seconds, 5 minutes, 30 minutes as well(P=.021, P=.017, P=.030) in comparison of primary shade. However, comparing three main shades, there was no significant difference between control and dry(P=.105). Using VITA $Easyshade^{(R)}$, color differences($\Delta$E) between control and dry, dry and re-wetting 30 minutes were statistically different(P=.002, P=.022). Conclusion. Primary shade could be changed in dry and wetting procedure in time, however there was no significant shade changes in overall.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E1호
• /
• pp.35-43
• /
• 2006

Ambient particle size distributions of PCBs and their dry deposition fluxes were measured at a site in Seoul to quantify dry deposition fluxes of PCBs and size characteristics of PCBs in the air, and to estimate ambient concentrations of gaseous PCBs and dry deposition fluxes. The dry deposition plate was used to measure dry deposition fluxes of particulate mass and PCBs and a cascade impactor and rotary impactor were used to measure ambient particle size distributions for small ($D_p<9{\mu}m$) and large ($D_p>9{\mu}m$) particles, respectively. Six sample sets were collected from April to July 1999. The fluxes of particulate total PCBs (the sum of 43 congeners) ranged from 160 to $607ng\;m^{-2}day^{-1}$. The size distribution of total PCBs was bimodal with two peaks in small particle size ($D_p{\sim}0.6\;and\;6{\mu}m$, respectively) and, thus, mass concentration being dominant in small particles. The mean particulate PCBs concentration was $6.9{\mu}g$ PCBs/g. The concentrations of PCB homologues in the gas phase were estimated based on the particle/gas partition coefficient ($K_p$) with the measured values of particulate PCBs in this study and they were comparable to those observed in other previous studies. Dry deposition fluxes were estimated by calculating dry deposition velocities.