• 한국식품저장유통학회지
• /
• 제7권4호
• /
• pp.389-394
• /
• 2000

단감의 수확 및 저장 중에 발생한 불량과실을 이용할 목적으로 분말화하기 위한 기초연구로서 본 실험을 행하였다. 일반성분 조성은 조단백질, 조지방, 조회분의 순으로 열풍건조 처리구는 0.9-1.1%, 15.0-39.0%, 2.3-3.3%이었으며, 동결건조 처리구는 1.3-2.2%, 27.0-49.0%, 2.5%로 나타났다. 무기성분 조성은 열풍과 동결건조 처리구 모두 potassium, magnesium, phosphorus; calcium, sodium이 주요 무기성분이었으며, 다른 미량원소는 약 3.00ppm 이하였다. 주요 지방산 조성은 열풍과 동결건조 처리구에서 capric acid, lauric acid tridecanoic acid, palmitic acid, palmitoleic acid, oleic acid, linoleic acid, linolenic acid 순으로 나타났다. 동결건조 처리구의 아미노산 조성은 aspartic acid, glutamic acid가 주요 아미노산이었다. 전체적으로 열풍건조 처리구보다는 동결 건조 처리구가 다소 높은 결과를 보였다. 열풍과 동결건조에 의한 분말 제조에서는 변색과 영양적인 측면을 고려할 때 열풍건조 보다는 동결건조가 우수한 결과를 보였으며, 열풍건조가 시간은 단축되었으나 얇게 펴서 건조해야 하는 단점이 있었으며, 단순한 열풍건조 만으로는 대량생산에 의한 분말 제조는 어렵고 좀더 보완적인 방법이 강구되어야할 것으로 생각된다. 이에 반해 동결건조에 의한 건조방법은 건조시간이 다소 걸리기는 했으나 딱딱해지거나 변색의 우려가 없으며 영양학적으로도 매우 안정적이었다. 이상의 결과를 평가해 볼 때 열풍건조에 의한 분말 제조는 구체적인 보완이 필요하며, 동결건조에 의한 분말 제조가 열풍건조에서보다 우수한 것으로 결과가 나타났다. 따라서, 파찌감의 분말건조 방법은 동결건조가 효율적일 것으로 생각된다.

• 한국식품저장유통학회지
• /
• 제13권6호
• /
• pp.703-707
• /
• 2006

본 연구는 각종 기능성을 함유하고 있는 차조기의 소비 증대와 부가가치 증대를 위하여 채취 시기별 차조기의 성분변화를 조사하였다. 수확 시기는 2005년 7월14일에서 2005년 9월2일 까지 총4회(I, II, III, IV)로 나누어 일반성분, 중금 속, 무기질, 아미노산, perillaldehyde, anthocyanin 성분을 분석하였다. 환원당의 함량은 수확시기에 따라 계속 증가하였으나 조단백질, 조지질, 총 아미노산 함량은 III차(8월15일) 채취시기 이후 급격히 감소하였다. 중금속(As, Pb, Cd, Hg)은 모든 처리구에서 감지되지 않았다. 무기질은 Zd, Fe, Mg는 III차 수확시기 이후 감소하였으나, Ca, K, P 함량은 수확시기에 따라 큰 차이를 나타내지 않았다. Perilladehyde는 I 차 0.36% II차 0.42%, III차 0.45%, IV차 0.35%를 각각 나타냈다. Anthocyanin는 함량은 I차 0.53%, II차 1.15%, III차 1.21%, IV차 0.87%를 나타냈다.

• 유기물자원화
• /
• 제26권2호
• /
• pp.85-93
• /
• 2018

톱밥 깔짚우사에서 채취한 젖소 분으로부터 바이오가스를 생산하는 효율을 분석하기 위하여 반 건식혐기소화 실험을 수행하였다. 첫 번째 실험으로서 젖소 분과 돈분 슬러리 그리고 두 가지 축분을 일정비율로 혼합한 재료를 대상으로 메탄 발생 잠재량(BMP; Biochemical Methane Potential) 실험을 수행하였다. 혐기소화 실험기간 동안 발생된 메탄가스의 누적량은 젖소 분이 포함된 처리구에서 더 많은 것으로 나타났다. 두 번째 실험으로서 깔짚우사에서 채취한 젖소 분을 단독으로 소화조에 투입하여 반 건식 혐기소화 실험을 실시하였다. 실험 결과, TS (Total Solids) 농도가 13%인 젖소 분의 적정 HRT (Hydraulic Retention Time)는 25일인 것으로 분석되었으며, TS 농도가 13%인 반응조에서의 바이오가스 발생량은 1.36~1.50v/v-d의 범위였고 평균은 1.44v/v-d 수준이었다. 젖소 분의 TS 농도를 15% 수준으로 설정한 혐기소화조에서의 적정 HRT는 30일이었으며 반응조에서의 바이오가스 발생량은 1.50~1.61v/v-d 수준이었고 평균은 1.47v/v-d 수준이었다. TS 농도가 17% 수준인 혐기소화조에서의 최적 HRT는 30일인 것으로 분석되었다. 이 반응조에서의 바이오가스 발생량은 1.50~1.61v/v-d 이었고 평균은 1.55v/v-d 수준이었다.

• Toxicological Research
• /
• 제18권1호
• /
• pp.43-46
• /
• 2002

A 61 Year-old female patient was hospitalized for lung cancer. Her Occupational history indicated that she had worked for an asbestos company for 9 years from 1976. The histopathology of the lung revealed malignant bronchioalveolar adenocarcima (stage III) in the lower-left lobe, and a lung sample was found to cantion an unusually high level of asbestos, 218.9$\times$$10^6$ asbestos fibers/g of dry lung tissue. The majority of asbestos fibers found was chrusotile. yet no asbestos body was detected. When compared with Korean male (0.3$\times$$10^6$ fibers/g of dry lung tissue) and female subjects (0.15$\times$$10^6$ fibers/g of dry lung tissue) with no known history of occupational asbestos exposure, the apparent cause of the lung cancer in the current patient was occupational exposure to asbestos.

• 한국조리학회지
• /
• 제20권5호
• /
• pp.34-42
• /
• 2014

The study explores the sensory properties of Backsulgi prepared with dry non-glutinous rice flour sweetened with various sweeteners(sugar, honey, oligosaccharide, trehalos, erythritol and accesulfame K). Sensory attributes of Backsulgi were evaluated by quantitative descriptive analysis(QDA), PCA and PLSR. The QDA results revealed that the sample sweetened with trehalose showed highest value in dryness, and samples with accesulfame K, honey and erythriol had relatively high levels in moisture and springiness. Principle component analysis (PCA) results showed 78.89 % of the total variation with PC1 (54.92%) and PC2 (23.98%), respectively. The samples with accesulfame K(AF) and honey, which showed high values in moisture level, springiness and sweet taste, showed similar attributes which led to a positive direction of PC1. The correlation between the sensory attributes and consumer acceptance showed that the most important factors for high consumer acceptance were moistness, springiness, sweet taste and sweet flavor. Overall, the samples with accesulfame K(AF) had the closest position in the PLSR results with highest overall consumer satisfaction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.627-632
• /
• 2005

In this study, a series of large-scale oedometer tests was performed to investigate the compressibility of rock fill materials. The testing samples were prepared to have three different grain size distributions and for each distribution, exist in two different states(dried and saturated). The test results indicated that particle breakages occurred mainly for the particles larger than 4.75mm in size and increased with increasing grain sizes. Also, it was found that, for a dry sample as it became well-graged, its compressibility decreased and accordingly, its tangent constrained modulus increased. A comparion between the samples in dry and saturated states revealed that compressibility of the materials increases with increasing water content. The values of tangent constrained modulus calculated for the tested dry samples were larger by about 10 to 20%, on average, than those for the saturated samples.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.98-105
• /
• 2011

Patterns and levels of aging vary between the book volume and sheets, even though both are made from the same paper materials. In case of book format, the outside is more easily affected than inner side by environmental factors such as temperature, humidity and air. In this study, the change in optical properties after dry heating accelerated aging was comparatively analyzed to understand the difference of the optical aging characteristics between outside and inner side of the duplicated beeswax-treated volume. It is found that the cover pages of the beeswax-treated volumes were more optically deteriorated than their middle pages. This indicates that outer sides of aging book volume directly exposed to the air is more vulnerable to serious deterioration than inner sides. Also, aromatic compounds such as benzoic acid and cinnamic acid were observed in the investigation of UV/VIS absorbance of the beeswax in each aged sample.

• 한국식품조리과학회지
• /
• 제30권5호
• /
• pp.517-525
• /
• 2014

The purpose of this study was to identify appropriate sweeteners that could improve the dryness, while reducing calorie by adding various sweeteners to Sulgitteok using dry non-glutinous rice flour. Of six sweeteners (sucrose, trehalose, honey, acesulfame K, oligosaccharide, and erythritol) added, Sulgitteok with acesulfame K had the highest moisture content, whereas Sulgitteok with trehalose had the lowest moisture content. The moisture content of all samples were decreased when storage period was increased except the sample added with trehalose. Sulgitteok with erythritol had the highest L-value, whereas Sulgitteok with oligosaccharide had the lowest L-value. The L-value and b-value of Sulgitteok samples decreased when storage period was increased. Sulgitteok with trehalose had the highest hardness, whereas Sulgitteok with oligosaccharide had the lowest hardness. The hardness increased in all samples when storage period was increased. Sulgitteok sweetened with acesulfame K and honey had the highest acceptance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.162-163
• /
• 2007

The dry etching of Si was investigated using direct dc biasing to the Si substrate. The TCP type etching system with a feed-through for applying a dc bias was used in the etching. The applied dc bias and ICP power was varied to examine the effect on the etching at the fixed chamber pressure and $SF_6$ flow rate of 10 mTorr and 10 sccm during. When the plasma was generated at ICP power of 100 W, the etch rate of Si was increased with the bias for the biased samples. However, the etching of Si for the non-biased sample was enhanced for the increased ICP power.