• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.53-53
• /
• 2003

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.04b
• /
• pp.17-17
• /
• 1998

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2010

For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.75-81
• /
• 2000

The processing properties for rice bread were examined using eight kinds of endosperm mutant rice. The varietal differences among eight kinds of endosperm mutant rice having the respective sugar contents and amylose contents were studied. The water absorptions of these eight cultivars were observed to have significant differences among the cultivars, revealing the water absorption ability of Shrunken(shr.) was 61.5%, and that of Punchilmi(fl) was 48.4%. In addition, the experiments using Whachungbyeo, Nampungbyeo and their mutant cultivars showed that the maximum water absorption was tend to be negatively correlated with the amylose content of each rice cultivars. This study also showed that the rice breads made by dry-milling was better in shape, mechanical properties(hardness, springiness, adhesiveness, chewiness) and texture tested using sensory evaluation than that made by wet-milling.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.3-10
• /
• 2002

The characteristics of dry and wet milled powder prepared by 1 cycle OREOX (oxidation and reduction of oxide fuels) treatment were investigated using the simulated spent fuel pellet. Sintered pellets simulating spent nuclear fuel burned in reactor were fabricated from $UO_2$ powder using as a starting material in fabrication of nuclear fuel. The 1 cycle OREOX-treated powder was prepared by only one path of oxidation md reduction of the simulated pellet. Powder having average particle size of less than 1 $\mu\textrm{m}$ could be easily obtained by dry milling, but not be achieved by wet milling. And, specific surface area of dry milled pow-der was higher than that of wet milled powder. Dry milled powder formed loose agglomerate, while wet milled powder showed the shape of irregular and angular particles. Dry milled powder provided higher green density, resulting in higher sintered density of higher than 95% TD and average grain size of larger than 8 $\mu\textrm{m}$ satisfying the standard specification of sintered pellets.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.828-831
• /
• 2005

Producing high transparency dielectric is still one of the most important subjects in the PDP process for improving luminous efficiency. It has been reported by many workers that transparency is improved by controlling the composition of the frit, the frit size and distribution, and the firing atmosphere. To understand the mechanism of discoloration of frit, $Bi_2O_3$ and $B_2O_3$ glasses were used for a leaching test using water and alcohol solution in milling. As a result, the frit prepared by wet milling had lower chemical durability than that prepared by dry milling. The leached layer around the frit showed high stability for heat treatment because the frit surface was covered with hydroxides or hydrates which was resulted from a reaction between the frit and the solution during milling.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.441-448
• /
• 2002

Dispersions of non-soluble ceramic particles in a metallic matrix can enhance the strength and heat resistance of materials. With the advent of mechanical alloying it became possible to put the theoretical concept into practice by incorporating very fine particles in a flirty uniform distribution into often oxidation- and corrosion- resistant metal matrices. e.g. superalloys. The present paper will give an overview about the mechanical alloying technique as a dry, high energy ball milling process for producing composite metal powders with a fine controlled microstructure. The common way is milling of a mixture of metallic and nonmetallic powders (e.g. oxides. carbides, nitrides, borides) in a high energy ball mill. The heavy mechanical deformation during milling causes also fracture of the ceramic particles to be distributed homogeneously by further milling. The mechanisms of the process are described. To obtain a homogeneous distribution of nano-sized dispersoids in a more ductile matrix (e.g. aluminium-or copper based alloys) a reaction milling is suitable. Dispersoid can be formed in a solid state reaction by introducing materials that react with the matrix either during milling or during a subsequent heat treatment. The pre-conditions for obtaining high quality materials, which require a homogeneous distribution of small dis-persoids, are: milling behaviour of the ductile phase (Al, Cu) will be improved by the additives (e.g. graphite), homogeneous introduction of the additives into the granules is possible and the additive reacts with the matrix or an alloying element to form hard particles that are inert with respect to the matrix also at elevated temperatures. The mechanism of the in-situ formation of dispersoids is described using copper-based alloys as an example. A comparison between the in-situ formation of dispersoids (TiC) in the copper matrix and the milling of Cu-TiC mixtures is given with respect to the microstructure and properties, obtained.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.34-38
• /
• 2000

The trend of cutting process today goes toward higher precision and higher efficiency. Many thermal/frictional troubles occur in high-speed machining of die and mold steels.In this paper, the thermal characteristics are evaluated in high sped ball end-milling of hardened steel(HRc42). Experimental work is performed on the effect of cutting environments on tool life and cutting temperature. Cutting environments involve dry, wet(20bar), compressed chilly air at -9$^{\circ}C$, compressed chilly air at -35$^{\circ}C$. The measuring technique of cutting temperature using implanted thermocouple is used. The cutting temperature is about 79$0^{\circ}C$, 35$0^{\circ}C$ and 54$0^{\circ}C$ in dry, wet and compressed chilly air at +9$^{\circ}C$, respectively. The tool life for compressed chilly air at -9$^{\circ}C$ is longer than all other cutting environments in experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.43-50
• /
• 2009

Semi dry cutting known as MQL (Minimum Quantity Lubrication) machining is widely spreaded into the machining shops nowadays. The objective of this research is to suggest how to derive optimum cutting conditions for the milling process in MQL machining. To reach these goals, a bunch of finish milling experiments was carried out while varying cutting speed, feed rate, oil quantity, depth of cut and so on with MQL. Then, response surface analysis was introduced for the variance analysis and the regression model with the experimental data. Finally, desirability function based on regression model was used to obtain optimal cutting parameters and verification experiment was done.