• 대한골관절종양학회지
• /
• 제13권1호
• /
• pp.43-47
• /
• 2007

Sj$\"{o}$gren 증후군은 외분비샘에 임파구 침윤으로 발생한 안구와 구강 건조를 특징적인 증세로 하는 만성적이며 서서히 진행하는 자가면역질환이나 저자들은 건조성 증세 없이 전신적 증세만을 호소하였으며 방사선 검사상 다발성 근골격계 전이로 오인되었으나 신세뇨관 산증을 동반한 일차성 Sj$\"{o}$gren 증후군으로 확진되었던 증례를 경험하였기에 보고하고자 한다.

• 한국수산과학회지
• /
• 제44권5호
• /
• pp.524-532
• /
• 2011

The intertidal benthic macroalgal floras of 19 uninhabited islands were investigated in the Goheung area, South Sea, Korea, in June 2008. Seaweed community structures on the rocky shores of four (Naemaemuldo, Ceoldo, Araedombaeseom, and Jinjioedo) of the 19 islands were also examined. Eighty macroalgal species were identified, including 13 green, 19 brown, and 48 red algae. The maximum number of species was found at Naemaemuldo, with 35 species, and the minimum was at Aredombaeseom, with 21 species. Seaweed biomass ranged from 21.39-76.22 g dry wt/$m^2$, with a maximum at Naemaemuldo, and minimum at Jinjioedo. Sargassum thunbergii was a representative species, distributed widely in the intertidal zone of the four islands. Subdominant seaweeds were Corallina pilulifera and Ulva pertusa at Naemaemuldo and Jinjioedo, respectively. Also, Ishige okamurae was dominant at Ceoldo and Araedombaeseom. Six functional seaweed forms were found at each study site, except for Araedombaeseom, which had four functional groups. On the rocky shores of the four sites, a coarsely-branched form was the most dominant functional group ranging from 44.44-61.90% in species number and 72.42-91. 09% in biomass. In conclusion, among the four study sites, the shore of Naemaemuldo Island had the best ecological status, with the highest number of species, and greatest biomass (mainly brown and red algae) and functional form diversity of seaweeds. Furthermore, on the rocky shore of Naemaemuldo, coarsely branched- and joint calcareous-form seaweeds, which grow in clean and undisturbed environmental conditions, were the representative functional forms.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.55-62
• /
• 1998

While excellent joint quality has been obtained using dry chamber underwater welding methods, the size limitations imposed by this process restrict its use for underwater construction work. The wet underwater shielded metal-arc welding eliminates this restriction but suffers from poor weld properties by the 1-pass bead-on-plate welding due to the excessive diffusible hydrogen. On the other hand, in the wet underwater welding, it is well known that the quantity of diffusible hydrogen in multi-pass welded parts reduce to less than that in 1-pass welded parts. Therefore, in this paper, welding experiments are made the 3-pass bead-on-plate welds by using TMCP and normalized steel plates and E4301 and cellulose coated electrode. After that, The amounts of the hydrogen absorbed into the 3-pass welded area were measured according to the JIS Z 3118 specification. The microstructural changes as well as the microhardness distribution after the underwater 3-pass welding were also investigated using Vickers microhardness tester and S.E.M and O.M. The results indicated that the quantity of diffusible hydrogen in 3-pass welded areas was reduced little less than a half of one of that in 1-pass welded areas at the specific welding condition. As a result, the cold cracking of 3-pass welded areas decreased by reduced effect of diffusible hydrogen. In the underwater 3-pass welding, the micrography of cold cracking fracture surface showed mainly the cleavage of hydrogen embrittlement.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• 한국동물위생학회지
• /
• 제29권4호
• /
• pp.493-496
• /
• 2006

This study investigated cases of progressively necrotizing limbs in Korean indigenous calves. The recent case (Case 1) involved a 3-month old, male calf in Jeonbuk province that presented a visibly dry form of gangrene affecting joints of the forelimbs and the hind limbs. Radiograph revealed osteoarthritis possibly resulting from pressure of disrupted joint skin, fasciae, deeper underlying musculatures and tendon. Histopathology of affected tissue showed necrotizing; severely thrombosed dilated blood vessels with rechanneling microvasculatures. The lack of substantial infectious inflammatory exudates in the vital organs and the inability to respond to antimicrobial treatment bolstered the notion that the observed thromboembolic and vascular lesion was attributed to possible vasoconstrictive effects of ergot alkaloids. Case 2: A previously encountered similar case in a 4-month old, male calf showing gangrene of hind limbs and posterior ataxia was likewise presented. These two cases were impressed as probable ergotism. Ergotism may be uncommon or underreported in Korea. Future isolation of ergot alkaloids in feeds or in pasture is highly suggested.

• 한국항행학회논문지
• /
• 제17권3호
• /
• pp.279-284
• /
• 2013

운항의 여러 단계 중 착륙단계에서 조종사들이 많은 부담을 느낀다. 이는 조종사들이 항공기 속도를 줄이고 접지하여 완전히 정지하는 동안 착륙안전에 영향을 미치는 여러 요소가 있기 때문이다. 만일 착륙하는데 활주로길이가 충분하다면 부담이 적을 수도 있다. 그러나 항상 그런 경우만 있는 것은 아니다. 따라서 착륙성능이 제한범위 내에 있는지 아닌지를 확인할 필요가 있다. 필요착륙거리는 시험비행 조종사에 의해 실증되어진 실제착륙거리에다가 항공사의 평균적인 조종사들을 위한 여유분을 포함한 것이다. FAR의 AFM(항공기 비행규정) 인가는 건조 및 습윤 활주로에서 수동착륙을 기반으로 한다. 기타 다른 활주로 조건에서는 인가가 필요하지 않다. JAR에서는 빙설/윤활활주로에서도 정해진 여유분을 포함시키도록 규정하고 있다. 자동착륙은 인가사항이 아니므로 실제착륙거리만 제공된다. 본 논문에서는 각 활주로 조건에서 포함된 거리 여유분을 분석하고자 한다. 또한 특정한 활주로 조건에서 여유분이 규정되어 있지 않은 경우 대안을 제시하고자 한다.

• 대기
• /
• 제31권4호
• /
• pp.361-376
• /
• 2021

"Gangwon Yeongdong Wind Experiments (G-WEX) Pilot Study: Downslope windstorms in the Taebaek Mountains, South Korea" is promoted based on joint organization by Gangwon Regional Office of Meteorology and National Institute of Meteorological Research and participation by 12 institutions to understand the mechanism in development of Yeongdong wind phenomena. The special observation (G-WEX) involved total of 5 intensive observations in March 2020 and April 2020. To collect the data necessary for the research on Yeongdong wind phenomena, (1) high-resolution surface observation network was used to examine surface wind and (2) atmospheric soundings were observed by using Rawinsonde, Wind profiler, Wind Lidar, and Drone. This study covers the detailed information on the special observational experiments for downslope windstorms in the leeward of the Taebaek Mountains, named as the Yeongdong wind, including the observational strategies, experimental designs, and pilot studies during the Intensified Observing Period (IOPs). According to 2020 G-WEX observation results, downslope windstorms were observed in 2~3 km of upper atmosphere when the strong winds happened around the top of the mountain near Daegwallyeong. Also, dry adiabatic expansion related to downslope windstorms caused temperature rise and led to formation of an inversion layer in altitude below 2.5 km. Bands of strong wind were located right under the altitude where downslope windstorms are observed with temporal rise of the temperature. As these are preliminary observation results, there needs to be continuous related researches and high-resolution weather observation.

• 융합정보논문지
• /
• 제11권7호
• /
• pp.298-306
• /
• 2021

본 연구목적은 병원 시설 근로자들의 구강 증상에 영향을 미치는 업무 위험요인을 살펴보고자 한다. 연구 방법은 수도권 지역의 대학병원 시설 관리 파견·용역 근로자 627명을 대상으로 2020년 11월 17일~2021년 5월 20일까지 설문조사를 실시하였다. 연구결과 근골격계 질환과 상해 위험이 높은 근로자들에게서 구강 증상이 높게 나타났다. 또한 직무 불안정과 조직 불공정성의 영역에서 구강점막, 악관절 장애, 구강건조증 증상이 높게 나타났으며, 이직 의도와 질병 출근 요인에서 구강건조증 위험도가 가장 높게 나타났다. 근로자들의 업무 위험 요인과 직무스트레스가 증가할수록 구강 증상 위험도가 증가하였다. 추후 병원 시설 근로자들의 구강건강 증진을 위한 구강보건정책 개선 기초 자료로 활용될 것이다.

• Animal Bioscience
• /
• 제35권5호
• /
• pp.677-689
• /
• 2022

Objective: This study was conducted to evaluate the effects of concentrate level and chromium-methionine (Cr-Met) supplementation on the growth performance, carcass characteristics, meat quality, and fatty acid composition of Tan lambs. Methods: Sixty male Tan lambs (21±1.23 kg body weight) fed a finishing diet (concentrate-to-forage ratio: 35:65 [LC group] or 55:45 [HC group]) with daily Cr-Met supplementation (0, 0.75, or 1.50 g) were used in a completely randomized design with a 2×3 factorial arrangement of treatments. Results: Lambs from the HC group had higher average daily gain, dry matter (DM) digestibility, dressing percentages, leg proportions, intramuscular fat (IMF) contents, and saturated fatty acid levels, but lower feed conversion ratios, globulin (GLB) and total protein (TP) concentrations, shear force, and monounsaturated fatty acid (MUFA) levels (all p<0.05). Cr-Met supplementation increased the DM digestibility, GLB and TP concentrations, rack and loin percentages, and cooking loss, but decreased the IMF contents and leg proportions (all p<0.05). Cr-Met supplementation at 0.75 g/d increased the conjugated linoleic acid (CLA) content in both the HC and LC groups (p<0.01). Significant interactions between the concentrate level and Cr-Met dosage were observed for MUFA (p<0.01) and polyunsaturated fatty acid (PUFA) (p<0.01) levels. Meat from the lambs fed an unsupplemented LC diet presented the highest PUFA and MUFA levels (p<0.01). However, the MUFA and PUFA levels decreased significantly with increasing Cr-Met supplementation levels in the LC group (p<0.01), whereas the opposite trend was seen in the HC group. Conclusion: The HC diet improved the growth performance of Tan lambs, increased their profitability by increasing leg and rack joint proportions, and improved meat quality by promoting an IMF content that was more visibly acceptable to consumers. Cr-Met supplementation at 0.75 g/d in a HC diet was the best choice and may be economically beneficial.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권2호
• /
• pp.230-240
• /
• 2016

Information on the effects of different yeast species on ruminal fermentation is limited. This experiment was conducted in a $3{\times}4$ factorial arrangement to explore and compare the effects of addition of three different live yeast species (Candida utilis 1314, Saccharomyces cerevisiae 1355, and Candida tropicalis 1254) at four doses (0, $0.25{\times}10^7$, $0.50{\times}10^7$, and $0.75{\times}10^7$ colony-forming unit [cfu]) on in vitro gas production kinetics, fiber degradation, methane production and ruminal fermentation characteristics of maize stover, and rice straw by mixed rumen microorganisms in dairy cows. The maximum gas production (Vf), dry matter disappearance (IVDMD), neutral detergent fiber disappearance (IVNDFD), and methane production in C. utilis group were less (p<0.01) than other two live yeast supplemented groups. The inclusion of S. cerevisiae reduced (p<0.01) the concentrations of ammonia nitrogen ($NH_3$-N), isobutyrate, and isovalerate compared to the other two yeast groups. C. tropicalis addition generally enhanced (p<0.05) IVDMD and IVNDFD. The $NH_3$-N concentration and $CH_4$ production were increased (p<0.05) by the addition of S. cerevisiae and C. tropicalis compared with the control. Supplementation of three yeast species decreased (p<0.05) or numerically decreased the ratio of acetate to propionate. The current results indicate that C. tropicalis is more preferred as yeast culture supplements, and its optimal dose should be $0.25{\times}10^7$ cfu/500 mg substrates in vitro.