• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.19-33
• /
• 1992

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorolog ital processecs . In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification Process through observation is emphasized.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.140.2-140.2
• /
• 2013

Strong metal-support interaction effect is an important issue in determining the catalytic activity for heterogeneous catalysis. In this work, we report the catalytic activity of $Au/TiO_2$, $Au/Al_2O_3$, and $Au/Al_2O_3-CeO_2$ nanocatalysts under CO oxidation fabricated by arc plasma deposition (APD), which is a facile dry process with no organic materials involved. These catalytic materials were characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and $N_2$-physisorption. Catalytic activity of the materials has measured by CO oxidation using oxygen, as a model reaction, in a micro-flow reactor at atmospheric pressure. Using APD, the catalyst nanoparticles were well dispersed on metal oxide powder with an average particle size (3~10 nm). As for catalytic reactivity, the result shows $Au/Al_2O_3-CeO_2$ nanocatalyst has the highest catalytic activity among three samples in CO oxidation, and $Au/TiO_2$, and $Au/Al_2O_3$ in sequence. We discuss the effects of structure and metal-oxide interactions of the catalysts on catalytic activity.

• Korean Journal of Materials Research
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2008

The ferroelectric properties of UV irradiated and non-irradiated PZT films prepared via photochemical metal-organic deposition using photosensitive precursors were characterized. Fourier transform infrared spectroscopy showed that complete removal of organic groups was possible through UV exposure of the spin-coated PZT precursor films at room temperature. The measured remnant polarization values of UV-irradiated and non-irradiated PZT films after annealing at $650^{\circ}C$ were 29 and $23\;{\mu}C/cm^2$, respectively. The UV irradiation was found to be effective for the enhancement of the <111> growth orientation and ferroelectric property of PZT film and in the direct patterning in the fabrication of micro-patterned systems without dry etching.

• Journal of Korea Water Resources Association
• /
• v.40 no.5
• /
• pp.397-407
• /
• 2007

The deposition of sewer solids during dry weather in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. In order to solve these problems and to manage sewer systems efficiently, development of estimation equations for solid sediments In sewer systems is needed. However, estimation of solid sediments has performed using specific methods such as computer model before the development of estimation equations. In this study, solid sediments in sewer systems were estimated using MOUSE model for Gunja drainage basin in Korea and the estimated results were verified using estimation equations developed by the U.S. Environmental Protection Agency. As results, the estimated values using MOUSE model are smaller than that of equations developed in 1977 but greater than that of equations developed in 1984. Although the comparison between simulated and measured solid deposition is difficult due to the absent of measurement data, the estimated values using MOUSE model is reliable and can be used to develop estimation equations for solid sediment in Gunja drainage basin.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.4
• /
• pp.369-377
• /
• 1998

To examine various aspects of Hg exchange processes, we measured Hg$^{\circ}$concentration gradients over soil surfaces in a residential area of Seoul during Sept. 1997. From these measurements, we found that Hg$^{\circ}$concentrations in lower(20 cm) and upper(200 cm) levels varied in the range of 3.15~14.38 (5.30$\pm$1.88: N=236) and 2.07~15.10ng/m$^3$(4.06$\pm$1.69: N=236), respectively. When our data were divided into emission and dry deposition, emission of Hg$^{\circ}$was overwhelmingly dominant (up to 98% in frequency) over dry deposition. The concentration gradients for emission and deposition events were 1.29$\pm$0.86(N=231) and -1.0$\pm$1.27ng/m$^3$(N=5), respectively. The observation of excessively high concentrations in both levels and development of strong gradients suggest that our study site be greatly affected by certain pollution sources of mercury. In face, those data were quite comparable to that had previously been observed from highly contaminated soil environs of Tennessee, USA. To provide some insights into the processes governing the Hg$^{\circ}$exchange processes, we have conducted correlation analyses between Hg$^{\circ}$data and other concurrently determined meteorological plus chemical data. In general, Hg$^{\circ}$concentrations of both levels exhibited similarly the existence of strong correlations with parameters like windspeed, temperature, and relative humidity. Although its concentration gradient data showed similarly strong correlations with meteorological parameters, they showed somewhat unique patterns in that their correlations with Hg$^{\circ}$concentration were noticeably stronger for the lower level than the upper level. To provide rough estimates of Hg$^{\circ}$fluxes in this study, we computed its flux using our gradient data and the predicted K values from previous studies. According to this approach, Hg$^{\circ}$emissions were generally in the range of 103$\pm$80(N=231), while its depositions, being scarcely found, were on the similar magnitude of -92$\pm$128ng/m$^2$/hr(N=5). The findings of excessive emission of Hg$^{\circ}$in residential area of Korea suggests that contamination of mercury be a significant process and hence be dealt more seriously.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.147-159
• /
• 1997

One of the most critical problems associated with filter-pack data comparisons from various field networks is the use of different sampling flow rates. In this field study, the effects of various filter-pack(FP) sampling conditions were examined. Experiments were conducted to evaluate the effects of varying sampling flow rates (1.5 to 10 sLpm) on measured concentrations of dry acid deposition species. Collocated FP samples were also collected to determine sampling and analysis data reproducibility. Ambient air samples were collected simultaneously for the seven day durations at varous flow rate. The chemical species measured were sulfur dioxide ($SO_2$), particulate sulfate(P-$SO_{4}^{2+}$), nitric acid ($HNO_3$), and particulate nitrate (P-$NO_{3}^{-}$). The results indicated that the collocated samples can be measured reproducibly and that sampling bias for the species measured is not significant. It was concluded that variations in the flow rates (1.5 to 10 sLpm) did not significantly affect the concentration of the species of interest. Although the results were not significantly different between different flow rates, artifacts were more likely to occur at high flow conditions (>5 sLpm) (e.g., via volatilization of particulate nitrates) than at low flow conditions(<5 sLpm).

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.851-861
• /
• 2022

In this study, we analyzed the effects of trees planted in urban areas on PM_2.5 reduction using a computational fluid dynamics (CFD) model. For realistic numerical simulations, the meteorological components(e.g., wind velocity components and air temperatures) predicted by the local data assimilation and prediction system (LDAPS), an operational model of the Korea Meteorological Administration, were used as the initial and boundary conditions of the CFD model. The CFD model was validated against, the PM_2.5 concentrations measured by the sensor networks. To investigate the effects of trees on the PM_2.5 reduction, we conducted the numerical simulations for three configurations of the buildings and trees: i) no tree (NT), ii) trees with only drag effect (TD), and iii) trees with the drag and dry-deposition effects (DD). The results showed that the trees in the target area significantly reduced the PM_2.5 concentrations via the dry-deposition process. The PM_2.5 concentration averaged over the domain in DD was reduced by 5.7 ㎍ m^-3 compared to that in TD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.134-134
• /
• 2012

최근 반도체 및 디스플레이 산업에서 진공, 특히 플라즈마 공정은 중요한 기술로 알려져 있다. 반도체 제조공정은 플라즈마를 이용하여 증착(deposition)공정 및 패터닝을 위한 식각(Dry Etch)공정으로 크게 나뉘고, 디스플레이 공정에서는 Glass위에 형성된 금속오염입자 및 polymer와 같은 불순물을 제거하는 공정으로 식각(Dry Etch)공정을 주로 사용하고 있다. 진공공정장비인 CVD, Etcher는 플라즈마와 활성기체, 고온의 공정온도에 노출 되면서 진공공정장비 부품에 부식이 진행되기 때문에 내플라즈마성이 강한 재료를 코팅하여 사용하고 있다. 하지만 장시간 부식환경에 노출이 되면, 코팅부품에서도 부식이 진행되면서 다량의 오염입자가 발생하여 생산수율 저하에 원인이 되기도 하고, 부품 교체비용이 많이 들기 때문에 산업체에서 많은 어려움을 겪고 있다. 본 연구에서는 산업체에서 코팅부품으로 많이 사용되고 있는 다양한(Al2O3, Y2O3 등) 산화막 및 세라믹코팅 부품의 내플라즈마 특성을 비교 연구하였다.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.2017-2020
• /
• 2005

The supported bimetallic Co-containing catalysts promoted by the different amount of noble metal (Pd) have been studied in the dry reforming of methane. The activity, selectivity, stability and resistance to the carbon deposition of Co-Pd/$Al_2O_3$ catalysts depend on both the catalyst composition and process conditions. It has been observed that the Co-Pd/$Al_2O_3$ catalysts produce the various oxygenates from $CO_2$ + $CH_4$ at moderate pressures.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.153-158
• /
• 2001

To investigate the effects of soil acidification on growth of Impatiens balsamina L. plants were transplanted to acidified soils with H$_2$SO$_4$ solution. The concentrations of soluble Ca, Mg, K, Al and Mn in the acidified soils increased with increment of H$^{+}$ addition to the soil. In both species, the plant height and root length were inhibited by soil acidification, showing much severer inhibition in Impatiens balsamina L. than in Tagetes patula L., As the soil pH decreases, the growth of underground parts decreased greatly than that of above ground parts in both species. Total dry weight decreased with increased Al concentration as well as lowered soil pH in both plants. There was a strong positive correlation between relative total dry weight and molar (Ca+Mg+K) / Al ratio of the soil. The results suggest that molar(Ca+Mg+K)/ Al ratio of the soil may be useful indicator for assessing the critical load of acid deposition in herb species.s.