• 제목/요약/키워드: Dry deposition

검색결과 363건 처리시간 0.024초

원자력 사고 중 핵종의 건. 습침적에 따른 농작물 오염 영향 (Influence of Radioactive Contamination to Agricultural Products Due to Dry and Wet Deposition Processes During a Nuclear Emergency)

  • 황원태;김은한;서경석;한문희;최용호;이창우
    • Journal of Radiation Protection and Research
    • /
    • 제27권3호
    • /
    • pp.165-170
    • /
    • 2002
  • 핵종의 지표 침적 모델의 고찰과 함께 방사성물질의 공기중 농도로부터 건침적 뿐 아니라 습침적에 따른 농작물 오염 영향을 분석, 고찰하였다. 이를 위해 방사성물질의 지표 침적량으로부터 농작물의 오염을 평가하는 기존 동적 섭식경로모델을 공기중 농도 또는 지표 침적량으로부터 평가할 수 있도록 개선하였다. 평가결과, 방사성물질의 지표 침적량은 습침적에 의한 영향이 건침적에 의한 영향보다 뚜렷이 높으나, 농작물의 오염정도는 핵종, 강우율 등에 따라 다르게 나타났다. 이러한 현상은 방사성물질의 지표 침적과 농작물에로의 차단중 어느 과정이 농작물 오염에 보다 지배적으로 작용하는가에 기인한다.

Source-Receptor Relationships of Transboundary Air Pollutants in East Asia Region Simulated by On-Line Transport Model

  • Jang, Eun-Suk;Itsushi Uno
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제4권2호
    • /
    • pp.111-116
    • /
    • 2000
  • Transboundary air pollution has recently become an area of increasing scientific interest and political concern as countries are receiving air pollutants from their neighbors. In order to gain a better understanding of the long-range transport processes of air pollutants and the source-receptor relationships among neighboring countries, an atmospheric transport model coupled with a RAMS(Regional Atmospheric Modeling System) model was applied to the East Asia region during the entire month of January 1993. The scalar transport option of the RAMS model was used to calculate special atmospheric constituents such as trace gases or aerosols. The sulfate production in clouds and rainwater and its removal processes by dry and wet deposition were considered. The sulfate budget from source regions to receptor regions was estimated by analysing the source-receptor relationships. When a specific receptor site revealed a sulfate value higher than the sulfate concentration based on its own source origin, this was taken to indicate long-range transport from another source region. The contribution ratio from various source region was calculated. The contribution ratio of dry and wet deposition was higher on the main continent of the East region. Furthermore, the high deposition amounts were identified on the west coast of Korea and the East China Sea.

  • PDF

Modeling of the Environmental Behavior of Tritium Around the Nuclear Power Plants

  • Park, Heui-Joo;Lee, Hansoo;Kang, Hee-Suk;Park, Yong-Ho;Lee, Chang-Woo
    • Nuclear Engineering and Technology
    • /
    • 제34권3호
    • /
    • pp.242-249
    • /
    • 2002
  • The relationship between the tritium release rate from the nuclear power plant and tritium concentration in the environment around the Kori site was modeled. The tritium concentration in the atmosphere was calculated by multiplying the release rates and $\chi$/Q values, and the d3V deposition rate at each sector according to the direction and the distance was obtained using a dry deposition velocity. The area around Kori site was divided into 6 zones according to the deposition rate. The six zones were divided into 14 compartments for the numerical simulation. Transfer coefficients between the compartments were derived using site characterization data. Source terms were calculated from the dry deposition rates. Tritium concentration in surface soil water and groundwater was calculated based upon a compartment model. The semi-analytical solution of the compartment model was obtained with a computer program, AMBER. The results showed that most of tritium deposited onto the land released into the atmosphere and the sea. Also, the estimated concentration in the top soil agreed well to that measured. Using the model, tritium concentration was predicted in the case that the tritium release rates were doubled.

산성 강하물질의 화학적 성분에 관한 연구 (A Study on the Chemical Components of Acid Deposition)

  • 권오영;윤오섭
    • 한국환경보건학회지
    • /
    • 제20권2호
    • /
    • pp.39-54
    • /
    • 1994
  • Dry and wet deposition samples were continuously collected by deposit gauge. In Bulkwang area of Seoul and Kanghwa in west coastal area of Korea. In order to evaluate the level of air pollution and its chemical composition, Bulkwang area located in Seoul and Kanghwa in west coastal area were chosen for sampling site. dry deposition concentrations, pH, electric conductivity and water soluble ion concentrations of deposit gauge were analysed. The results of comparison between urban area and coastal area were summarized as follows. Mean concentrations of dry deposition in Bulkwang was 2.807 ton/km$^2$/month (range: 5.171~1.128 ton/km$^2$/month) while that in Kanghwa was 1.990 ton/km$^2$/month (range: 3.358 ~ 1.084 ton/km$^2$/month), which showed a significant difference between two areas. The rainfall during the period from June to September in 1990 recorded 1859.7 mm which was 78.8% of its mean amount in Seoul, and 1846.9 mm which was 81.6% that of Kanghwa. In Bulkwang area, correlation coefficients of deposit chemical composition were 0.95 for SO$_4^{-2}$ and Na$^+$, 0.94 for SO$_4^{-2}$ and NH$_4^+$, 0.93 for CI$^-$ and NH$_4^+$ and 0.85 for Cl$^-$ and Ca$^{2+}$, respectively. Then, the results indicate that sulfates such as $Na_2SO_4$, $(NH_4)_2SO_4$, and CaSO$_4$ were the major chemical state of deposit. In Kanghwa area, it was considered that NaCl, $NH_4NO_3$, NaNO$_3$, and $Ca(NO_3)_2$ were the major chemical state of deposit.

  • PDF

건식 세정기용 전원장치 개발 (The development of power supply for dry scrubber)

  • 김수석;원충연;최대규;최상돈
    • 전력전자학회논문지
    • /
    • 제6권5호
    • /
    • pp.394-399
    • /
    • 2001
  • 반도체 생산 공정에 있어, 저압 화학적 기상 증착(Low Pressure Chemical Vapor Deposition)과 프라즈마 강화 화학적 기상 증착(Plasma Enhanced Chemical Vapor Deposition) 공정 후 발생된 환경 유해 가스를 효과적으로 세정하기 위한 장비인 건식 세정기(dry scrubber)의 전원장치에 대한 연구이다. 주 전력회로는 1500W, 스위칭주파수 100kHz의 위상 변위 풀 브리지(Phase Shift Full-Bridge)방식의 인버터와 100kHz 저역 통과 필터 및 임피던스 변환기로 구성되었다 모드해석과 모의실험을 통하여 회로방식의 타당성을 확인하였고 50$\Omega$ dummy load 및 chamber 실험을 통하여 다양한 부하조건에서도 프라즈마를 안정되게 발생시킬 수 있음을 확인하였다.

  • PDF

팔당호 유역에 대한 질소와 황의 건식 침적량 추정 (Estimation of Nitrogen and Sulfur Dry Deposition over the Watershed of Lake Paldang)

  • 김진영;김영성;원재광;윤순창;우정헌;조규탁
    • 한국대기환경학회지
    • /
    • 제21권1호
    • /
    • pp.49-62
    • /
    • 2005
  • Lake Paldang is a main resource of drinking water for 20 million people in the greater Seoul area. Dry deposition amounts of nitrogen and sulfur were estimated for three typical days in each season over the watershed of Lake Paldang. Models- 3/CMAQ (Community Multiscale Air Quality) and MM5 (Mesoscale Model) were used to predict air quality and meteorology, respectively. Aerosols as well as gaseous pollutants were considered. Nitrogen was mainly deposited in the form of HNO, while most of sulfur was deposited in the form of SO$_2$. Contribution of secondary pollutants was the largest in fall since they were transported from the greater Seoul area. However, contribution of secondarily-formed particulate pollutants to the nitrogen deposition was the largest in winter because semi-volatile ammonium nitrate favors lower temperature. Annual deposition amounts of nitrogen and sulfur were 37% and 26% of their emission amounts, respectively, over the watershed of Lake Paldang. Higher value of the nitrogen deposition showed a more influence of pollutants emitted in the greater Seoul area.

MONNTORING AIR QUALITY AND ACIDDEPOSITION IN SOUTHERN U.S.

  • Allen, Eric R.
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 1997년도 가을 학술발표회 프로그램
    • /
    • pp.1.1-32
    • /
    • 1997
  • Atmospheric monitoring capabilities were established in 1988 by the University of Florida at Duke forest, near Durham. NC: Cary forest, near Gainesville, FL: and Austin forest, near Nacogdoches, TX. Continuous (hourly averaged) measurements of air quality (ozone, nitrogen oxides and sulfur dioxide) and meteorological variables were made at these three low elevation (< 200 meters), rural locations in the southeastern U.S. for more than three years. During the same period at these sites wet and dry acid deposition samples were collected and analyzed on an event and weekly basis, respectively The monitoring locations were selected to determine actual atmospheric exposure indices for southern pine species in support of on-site surrogate exposure chamber studies conducted by Southern Commercial Forest Research Cooperative (SCFRC) investigators. Daily and quarterly averaged ozone maxima were higher (55 ppb) at the northernmost site in the network (Duke forest) in the second and third quarters (spring and summer seasons) and lower (35 ppb) in the first and fourth quarters (winter and fall seasons), when compared to ozone levels at the two southernmost sites (Cary and Austin forests). Seasonal ozone levels at the latter two sites were similar Nitrogen oxieds and sulfur dioxide levels were insignificant (< 5 ppb) most of the time at all sites, although soil emissions of NO at two sites were found to influence nighttime ozone concentrations. Typical maximum quarterly and annual aggregate ozone exposure indices were significantly higher at Duke forest (92.5/259 ppm-hr) than those values observed at the two southern sites (65.6/210 ppm-hr). Acid deposition (wet and dry) components concentrations and deposition fluxes observed at the Duke forest, NC piedmont site, were generally greater, dependent on site and season, than corresponding variables measured at either of the two southern coastal plain sites (Cary and Austin forests). Acid deposition variables observed at the latter two sites were remarkably similar, both qualitatively and quantitatively, although the sites were located 1300 km apart. A comparison of deposition fluxes of elemental nitrogen (NO3, NH4') and sulfur (5042-, SO3) components in wet and dry forms indicated that wet deposition accounts for approximately 70% of the total nitrogen and 73% of the total sulfur input on an annual equivalent basis at all sites.

  • PDF

Characteristics of Ambient Metals: Size Segregated Ambient Concentrations and Dry Deposition Fluxes at Four Sites in Kunpo in 2000

  • Kim, Yong-Pyo;Yun, Hui-Jung;Yi, Seung-Muk
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제18권E2호
    • /
    • pp.57-68
    • /
    • 2002
  • Atmospheric dry deposition fluxes and size segregated concentrations of particulate metal elements were measured at four sites in Kunpo, a small city in the Seoul metropolitan area in Korea. At each site, aerosol samples were collected by dry deposition plates, a cascade impactor, and a coarse panicle rotary impactor during four sampling periods. At all sites, the average fluxes of metals measured during daytime were higher than nighttime fluxes due to higher wind speeds and higher ambient concentrations during daytime. The average fluxes of crustal elements (Al, Ca) were 1∼2 orders of magnitude higher than anthropogenic elements (As, Cd, Cu, Mn, Ni, Pb, and Zn). The daytime fluxes of Al and Ca were between 90 and 12000 $\mu\textrm{g}$ m$\^$-2/ day$\^$-1/, and the nighttime fluxes of Al and Ca were between 20 and 2200 $\mu\textrm{g}$ m$\^$-2/ day$\^$-1/. The daytime fluxes of Pb, a typical anthropogenic element, were between 20 and 160$\mu\textrm{g}$ m$\^$-2/ day$\^$-1/, and the nighttime fluxes of Pb were between ND and 100$\mu\textrm{g}$ m$\^$-2/ day$\^$-1/. Also the ambient metal concentrations during daytime were higher than nighttime. Based on a dust emission estimation study in Kunpo, it was found that dust emissions during daytime are higher than nighttime. The concentrations of crustal elements were higher than anthropogenic elements. The distributions of heavy metals were mainly in small particles (D$\_$p/ 9㎛). The fraction of crustal elements in the large particles (D$\_$p/> 9㎛) were higher than anthropogenic elements.

Numerical Simulation: Effects of Gas Flow and Heat Transfer on Polymer Deposition in a Plasma Dry Etcher

  • Joo, Junghoon
    • Applied Science and Convergence Technology
    • /
    • 제26권6호
    • /
    • pp.184-188
    • /
    • 2017
  • Polymer deposition pattern on the ceramic lid surface is analyzed by numerical modeling. Assumption was made that is affected by gas flow pattern from the horizontal and vertical nozzles, temperature profile from the finger-like branches made of graphite and electrostatic potential effect. Calculated results showed gas flow dynamics is less relevant than two others. Temperature and electrostatic effects are likely determining the polymer deposition pattern based on our numerical simulation results.

온도조절 화학기상증착법을 활용한 대용량 허니컴 구조촉매 제조 연구 (Study on the Simple Preparation Method of Honeycomb-structured Catalysts by Temperature-regulated Chemical Vapor Deposition)

  • 서민혜;김숭연;김영독;엄성현
    • 공업화학
    • /
    • 제29권1호
    • /
    • pp.18-21
    • /
    • 2018
  • 본 연구에서는 대용량 구조 촉매의 제조 및 활용 가능성을 확인하고자 셀 밀도가 높은 세라믹 허니컴 구조체와 온도조절 화학기상증착법을 활용하여 촉매를 제조하고 건식 개질 반응에 대한 촉매 활성을 평가하였다. 셀 밀도 600 cpsi 코디어라이트 허니컴(CDR)을 대상으로 니켈을 코팅한 NiO/CDR 촉매는 코팅 조건과 시간을 조절함으로써 허니컴 구조체 셀 내부까지 충분한 균일 증착이 가능하였다, $800^{\circ}C$, 공간속도 $10,000h^{-1}$$CH_4$$CO_2$를 1 : 1로 주입한 조건에서 $CH_4$는 약 83%, $CO_2$는 약 90% 이상의 우수한 전환율을 보여 건식 개질 반응에 효과적으로 적용이 가능하다는 것을 확인하였다. 이 결과를 토대로 대면적, 대용량 촉매 제조 시 온도조절 화학기상증착법이 매우 유용하게 활용될 수 있음을 확인하였다.