• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.420-426
• /
• 1993

The machinability of ceramics has been experimentally studied. The experiments were conducted on alumina cernmics of various purity, quartz, and cordierite using the sintered diamond tools and CBN tools. Tool wasre, surface roughness, and cutting resistence were measured and analysed. It was found that the workpieces could be machined with the diamond and CBN tools, but the sintered diamond tools were more efficient for the machining of the high strength ceramics. The machining of alumina ceramics with sintered diamond tools showed that (1) wet machining prolonged tool life comparing with dry machining, (2) workpiecewith higher purity had better surface roughness, (3) severe cutting conditions led to the chipping and fracture of tool and increase of the surface roughness and cutting resistance, (4) 20~40m/min of cutting speed, 0.01~0.02mm/rev of feed, and 0.1~0.2mm of cutting depth are suggested as proper cutting conditions for the high strength ceramics.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.121-133
• /
• 2020

Underwater cutting has a different mechanism than dry cutting, and there are more restrictions than benefits. Due to these constraints, research and development of underwater cutting has been very limited. At present, reactor dismantling is emerging as an important task worldwide, and reactor pressure containers, a key part of the reactor, are decommissioned based on underwater cutting. Reactor pressure containers are high-level radioactive waste, which is one of the main goals of today, such as to bridge the gap between environmental, safety, and cutting performance; hence, a process suitable for cutting should be applied. Therefore, many studies are being conducted on underwater cutting in connection with the dismantling of nuclear reactors in various areas in order to find appropriate processes. This paper first introduces the core technology of underwater cutting processes and discusses various processes. The emphasis is then placed on the adequacy of the reactor dismantling application. More specifically, we examine the suitability for the mechanical and thermal cutting processes, respectively, to find a solution suitable for dismantling a reactor. We discuss how each solution can sufficiently perform the specified functions at each stage of reactor dismantling and suggest that these processes can perform all of the work of underwater cutting.

• 한국초지조사료학회지
• /
• 제15권2호
• /
• pp.124-131
• /
• 1995

In order to find out optimum seed production date according to different defoliation and flooding period of Italian ryegrass, this studies with Tetrone were canied out on the experimental field of Honam Crop Experiment Station from 1986 to 1988. Treatments included cutting date of Nov. 20 and Apr. 10 and flooding period of 5-25 days. In soil after experiment, organic matter, phosphate and silicate content increased, but potassium content decreased 0.16% than that before experiment. Heading and maturing date of Nov. 20 cutting were same with those of non cutting, those of Apr. 10 cutting lates 6 days to heading date and 2 days to maturing date. Plant height and culm length of Nov. 20 cutting were sirniller to those of non cutting, those of Apr. 10 cutting were shorter and panicle length have no difference between non cutting and cutting. Lodging of cutting treatment was reduced than that of non cutting. Lodgin was increased as flooding period was long, also loding of all treatment occured at 30 days after heading. Two cutting times of Nov. 20 and Apr. 10 have the most fresh yield, while non cutting have the most dry matter yield. Optimun seed productin date was considered to suitable when 35 days after heading (Jun. 14), at this time, seed production was 1,640 to 2,640 kg/ha. Also if flooding j u r y have, seed production was good between 10 days and 15 days after flooding.

• 한국습지학회지
• /
• 제7권2호
• /
• pp.145-158
• /
• 2005

육지로 격리된 거리에 따른 갈대의 생육과 지상부의 예취가 익년 갈대생장에 미치는 효과를 규명하기 위해 2000년부터 2001년까지 경기도 화성시 주곡면 호곡리에서 갈대 자연군락을 대상으로 초장과 건중량을 조사하였다. 육지와 접한 지역은, 갈대의 평균밀도는 122.67개체/$m^2$, 평균초장은 100.36 cm, 개체당 평균 건중량은 4.241 g, 단위면적당 건중량은 $537.574g/m^2$이었다. 그리고 해양방향에서 육지방향으로 이행함에 따라 개체의 초장 및 건중량, 단위 면적 당 건중량이 현저히 증가하는 경향을 보였다. 한편, 육지와 격리된 지역은 평균밀도는 102.30개/$m^2$, 평균초장은 43.894 cm, 개체당 평균 건중량은 0.779 g, 단위면적당 건중량은 $73.495g/m^2$이었다. 또한 해양방향에서 육지방향으로 이행함에 따른 갈대의 초장과 건중량의 변화는 없었다. 예취한 지역에서 익년의 갈대 생장은 예취하지 않은 지역에 비해 초장과 개체당 건중량은 차이가 없었으나 밀도와 단위 면적당 건중량이 현저히 감소하는 것으로 나타났다.

• 한국초지조사료학회지
• /
• 제6권2호
• /
• pp.103-110
• /
• 1986

본(本) 시험(試驗)은 기상환경(氣象環境) 및 예취관리(刈取管理)가 주요(主要) 북방형(北方型) 목초(牧草)의 물질생산성(物質生産性)과 에너지가치(價値)에 미치는 영향(影響)을 구명(究明)코자 한국(韓國)의 Suweon, Cheju 및 Taekwalyong과 서독(西獨)의 Freising 및 Braunschweing에서 $1975{\sim}$79년간(年間) 동시(同時)에 실시(實施)되었다. 공시초종(供試草種)은 orchardgrassm perennial ryegrass 및 meadow fescue로 예취방법(刈取方法)은 방목기(放牧期)(년(年)$6{\sim}7$회(回)), silage 기(期)(년(年)$4{\sim}5$회(回)) 및 건초기이용(乾草期利用)(년(年) 3회(回))으로 구분(區分), 분할구(分割區) 배치법(配置法) 4반복(反復)으로 시험(試驗)을 실시(實施)하였는바 얻어진 결과(結果)는 다음과 같다. 1. 한국(韓國)에 있어서 orchardgrass, perennial ryegrass 및 meadow fescue의 생산성(生産性)은 예취관리(刈取管理)와 재배기간중(栽培期間中)의 기상환경(氣象環境)에 의(依)해 가장 큰 영향(影響)을 받았다. 환경요인중(環境要因中) 온도(溫度) 및 강수량(降水量)은 수량(收量)을 좌우(左右)하는 가장 중요(重要)한 기상요인(氣象要因)에 속하며 일조시간(日照時間), 일사량(日射量), 재배년도등(栽培年度等)도 요인상호간(要因相互間)의 interactions에 의(依)해 목초생산성(牧草生産性)에 큰 영향(影響)이 미쳤다. 2. 초종별(草種別) 건물수량(乾物收量)은 orchardgrass가 지역평균(地域平均) 875kg/10a을 생산(生産) perennial ryegrass 및 meadow fescue에 비해 각각(各各) 32% 및 27%가 높았다. 한편 orchardgrass는 년차별(年次別) 수량변이(收量變異)가 적은데 반(反)해 perennial ryegrass 및 meadow fescue는 초년도(初年度)(1976)에 비해 1977년(年)에는 각각(各各) 65.5% 및 29%의 수량감소(收量減少)가 있었다. Freising 및 Braunschweig에서는 각(各) 초종(草種) 공(共)히 년도(年度)가 경과(經過)됨에 따라 증가(增加)되는 경향(傾向)이었다. 3. 예취방법별(刈取方法別) 목초생산성(牧草生産性)은 초종(草種)에 따라 차이(差異)가 있어 orchardgrass는 건초기(乾草期)에 년(年)3회(回), perennial ryegrass 및 meadow fescue는 silage 기(期)에 년(年) $4{\sim}5$회(回) 이용(利用)함으로서 가장 높은 수량(收量)을 얻을 수 있었다. Freising 및 Braunschweig 지방(地方)의 예취방법별(刈取方法別) 공시초종(供試草種)의 평균(平均) 건물수량(乾物收量)은 각각(各各) 1326(년(年)3회(回)이용(利用)), 1175(년(年)$4{\sim}$ 5회(回))및 1,098kg/10a(년(年)$6{\sim}$7회(回))이었다. 4. 목초(牧草)의 화학성분(化學成分) 및 energy concentration은 환경요인(環境要因)과 예취관리(刈取管理)에 따라 큰 차이(差異)가 있다. 가소화단백질(可消化蛋白質) 수량(收量)은 각지역(各地域) 공(共)히 방목기(放牧期)의 잦은 예취(刈取)에서 가장 높았다. Net energy 수량(收量)은 Freising(서독(西獨))에서는 건초기이용(乾草期利用)이 각각(各各) 694(orchardgrass), 665(perennial ryegrass) 및 623 kStE(meadow fescue)을 생산(生産) 가장 좋았는데 비해 Cheju, Suweon 및 Taekwalyong 지방(地方)에서는 방목기(放牧期) 및 silage 기(期) 이용(利用)이 건초기이용(乾草期利用)보다 유리(有利)하였다.

• 한국초지조사료학회지
• /
• 제22권4호
• /
• pp.287-296
• /
• 2002

본 시험은 제주지역에서 양마의 적응성과 생산량 및 사료가치를 구명하기 위해서 양마 Evergrlades 41, China Chong-pi 3 및 수수$\times$수단 교잡종 Pioneer 947를 이용하여 2000년 5월부터 11월까지 제주의 4개 지역( 제주시, 서귀포시, 성산 수산 및 한림 금악)에서 수행되었다. 건물수량은 수수$\times$수단 교잡종 (pioneer 947), 양마 (Everglades 41) 및 (China Chong-pi 3)을 비교시 각각 7,313, 4,653 및 5,238 kg/ha로서 Chong-pi 3이 가장 높은 수량을 보였고(P<0.05) 지역별(제주, 서귀, 성산 및 한림)로 각 각 5,040, 5,663, 7,283 및 4,950 kg/ha서 성산지역이 가장 높은 수량을 보였다(P<0.05). 양마 두 품종 모두에서 1회 수확이 2회 수확 보다 높은 건물수량을 보였다. NDF 및 ADF 함량은 두 양마 품종간 또는 수수X수단 교잡종과 양마간 뚜렷한 차이가 없었고 조단백질 함량은 수수$\times$수단 교잡종 Pioneer 947, 양마 Everglades 41 및 China Chong-pi 3에서 각각 12.60, 16.1 및 16.20%를 보여 수수$\times$수단 교잡종 보다 양마에서 높은 조단백질 함량을 보였으며(p<0.05) 지역 간에 차이가 분명치 않았다. 그러나 1회 예취(13.72%) 보다 2회 예취 시(17.75%) 양마의 조단백질 함량이 유의적으로 증가하였고(P<0.05) 한편 NDF(50.61, 42.57%)와 ADF(50.66, 41.61) 함량은 1회 보다 2회에서 유의적 감소를 보였다. (P<0.05). 수확이 끝난 후 수수$\times$수단 교잡종(Pioneer 947)과 양마 2 품종(Everglades 41, China-chong-pi 3)을 재배했던 4개 지역 토양에 대한 중금속 함량을 조사한 결과 처리간 뚜렷한 차이를 발견치 못했다. 결론적으로 양마는 수수$\times$수단 교잡종 보다 건물수량이 높지 못하였으나 조단백질 함량이 수수$\times$수단 교잡종 보다 높았고 그 중 1회 보다 2회 예취를 하므로 더 높은 조단백질 함량 을 보였다.

• 농업과학연구
• /
• 제43권2호
• /
• pp.240-248
• /
• 2016

Radish is a common vegetable consumed in Korea, Japan, and China. Radish Breeding has been conducted based on morphological properties, such as shape and color. Recently, physicochemical properties of radish are attracting more attention from breeders to develop cultivars for the retail market. In this study, major components of radish were determined and their relationship with textural property analyzed. Sixty-six radish cultivars were selected and divided into white head (WH) and green head (GH) according to their head color. The cutting forces of GH and WH groups were $2.17{\pm}0.34kg$ and $2.31{\pm}0.36kg$, respectively (P > 0.05). The starch contents of GH and WH were $3.75{\pm}0.39g\;per\;100g$ (dry basis) and $4.24{\pm}0.62g$, respectively. Cellulose contents in both groups were similar at 12.3-12.4 g per 100 g (dry basis). Pearson correlation coefficients between cutting force, cellulose content, and starch content ranged from -0.33-0.326 which does not demonstrate any strong correlation between these components. Therefore, no relationship was found between the cutting force and the starch content or the cellulose content for the cultivars analyzed in this study. As the first intensive study on the texture and the major components of radish, these results could provide valuable information for radish breeding if further studies on taste and nutrient components are conducted.

• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.26-32
• /
• 1988

This study was conducted to determine the effects of cutting frequency and cutting height on agronomic characteristics and yield performance of sorghum-sudangrass hybrid, cv. Pioneer 855 F on the experimental field of Livestock Experiment Station, Suweon. The results are summarized as follows: 1. The relative contribution of leaf component to total yield was higher when the plants were cut frequently rather than when defoliated only a few times, and tend to be higher with high cutting. 2. Leaf Area Index (LAI) was the highest at the primary growth of two cutting times scheme and the first regrowth for three or four cutting times a year, but LAI, in general, was not related to cutting height. 3. Crop Growth Rate was the heighest at the first regrowth-plants grown in summer, and it was also related to the amount of stubble left at the previous cut. 4. Dead stubbles were not occurred when plants were cut before heading, but those were accompanied by the frequent and low cutting. 5. Total fresh fodder and dry matter yield were the highest at two times cut a year, and decreased with frequent cutting. The optimum cutting height at two times cut was ca. lOCm height stubble from the ground level, but yield increased with higher level cutting at the three or four times cut a year.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.409-412
• /
• 2004

In this paper, an integrated automation system of pattern design and $CO_2$ laser cutting for diving suits is presented. Pattern design includes grading which creates a full-size range from a base pattern. Tool path for laser cutting from the patterns is generated in G-code format. $CO_2$ Laser cutting machine is developed to help cut the patterns with accuracy and speed. Aluminum profiles, ball screws, and stepping motors are engaged into the machine as frame structure, transfer unit, and driving devices respectively. The developed system is tested in dry suit cutting, convincing it can be readily introduced in driving suits manufacturing with respect to cost and efficiency.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.