• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2583-2588
• /
• 2008

In the present experimental study, the regime limit and pressure drop of dry-plug flow (dry wall condition at the gas portions of plug flow) in round mini-channels has been investigated. The air-water mixture was flowed through the round mini-channels made of Teflon, where the tube diameters ranged from 1.26 to 2.06 mm. For the present experimental range, with decreasing of the tube diameter, the transition between the plug and slug flows (wet and dry) happened at the higher gas superficial velocity region, which were in good agreement with the previous flow pattern maps tested. On the other hand, the transition between the wet- and dry-plug flows was little affected by the change of the tube diameter. In the pressure drop of dry-plug flows, among the correlations tested, the Lee and Lee's (2008) correlation best fitted the measured pressure drop data within the mean deviation of 10% for the present experimental range.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.376-380
• /
• 2003

In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition their and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.205-214
• /
• 2021

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

• 한국식품영양학회지
• /
• 제28권6호
• /
• pp.1065-1070
• /
• 2015

초다수성 가공용 품종인 보람찬 및 한마음 품종의 수분 함량, 수분결합도, 아밀로오즈 함량, 손상전분, 입도 분포 및 호화특성을 분석하였다. 국내 초다수성 품종의 습식 및 건식분쇄에 의한 쌀가루의 수분 함량은 보람찬 및 한마음의 경우, 각각 14.79, 13.56 및 7.98, 7.14%를 나타냈다. 수분결합도의 경우, 보람찬 및 한마음 시료는 습식과 건식분쇄에 의해서 각각 236.67, 231.35% 및 275.83, 279.73%를 나타내어 건식분쇄에 의해 수분결합도가 증가하는 것으로 확인되었다. 습식분쇄된 초다수성 쌀가루의 수분결합력은 대조구로 사용된 일반미의 수분결합력과 비교 시 낮게 나타나는 것으로 확인되었다. 건식분쇄에 의한 호품, 보람찬 및 한마음 품종의 아밀로오즈 함량은 각각 19.12, 19.55 및 19.59%를 나타내었다. 손상전분의 경우, 보람찬 및 한마음 시료의 경우 습식과 건식분쇄에 의해 12.51, 10.69 및 14.98, 15.22%를 나타내어 습식분쇄에 비해 건식분쇄했을 경우 전분손상도가 증가하는 것으로 확인되었다. 또한 습식분쇄된 초다수성 쌀가루의 손상전분은 대조구에 비해 낮게 나타났으나, 건식분쇄 시에는 손상전분 함량이 대조구에 비해 증가하는 것으로 확인되었다. 국내 초다수성 품종의 분쇄방법에 따른 입도 분포의 경우, 최빈값은 습식에 비해 건식으로 분쇄할 경우 입도가 높은 것으로 나타났다. 초다수성 품종인 보람찬, 한마음을 습식 및 건식분쇄한 쌀가루의 최고 점도는 각각 2,300, 2,319 및 3,352, 3,022 cP를 나타내었다. 최고점도 및 최종점도의 경우 습식분쇄한 초다수성 쌀가루 시료는 대조구에 비해 높은 값을 나타내었다. Setback의 경우, 초다수성 품종 중 건식분쇄한 보람찬 쌀가루의 경우 가장 낮은 값을 나타내었으나, 대조구와 비교했을 경우 초다수성 쌀가루의 setback 값은 대조구에 비해 높은 값을 나타내었다.

• 항공우주기술
• /
• 제9권2호
• /
• pp.98-104
• /
• 2010

대기 중의 수증기는 가스터빈엔진의 주요성능에 많은 영향을 끼친다. 습공기의 영향은 기온 및 기압이 높은 여름철 해면 고도, 높은 비행 마하수 그리고 낮은 엔진 회전수에서 이 더욱 두드러진다. 이러한 습공기 유입에 따른 가스터빈 엔진의 성능변화의 정도를 살펴보고자 가스터빈 시뮬레이션 프로그램(GSP)과 200lbf 급 초소형 터보제트 엔진의 고공환경 성능시험을 통해 습도가 엔진성능에 미치는 영향에 대하여 알아보았다. 고공환경 엔진시험을 통해, 건공기 유입에 비해 습공기 유입 시 순추력에서 2.826% 낮게, 비연료소모율에서 1.325% 높게 측정되었다.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.262-267
• /
• 2016

This paper describes a design of a hair drier to improve its performance. the performance of the hair drier can be improved by increasing the wind velocity of its discharge port. the design of the hair drier is accomplished by using the CFD. the validity of design results were verified by comparison with the dry change of the hair drier. In this paper, the initial condition of the applied hair drier is as follows, the number of the blade is 9, the diameter of the suction port is 40[mm], the tip clearance is 12.5[mm], the con angle is $28.5^{\circ}$ and the fan angle is 27.5R. From design results, the enhanced condition of the hair drier can be obtained as follows, the number of the blade is 3, the diameter of the suction port is 50[mm], the tip clearance is 10.5[mm], the con angle is $21.5^{\circ}$ and the fan angle is 75R. At the enhanced condition of the hair drier, the wind velocity of the hair drier is 29[%] increase, and the dry time is 40[%] increase compare to the initial condition of the hair drier.

• 한국동물위생학회지
• /
• 제24권3호
• /
• pp.279-285
• /
• 2001

The change of the body condition score(BCS) and milk production graph as days in milk by lactation number show that the productivity of cow is on the increase as increase the lactation number, but the health condition is much worse because of the inappropriate nutrition intake. Metabolic profiles test(MPT) results indicate that the early-lactation for directly after the parturition to the peak production of milk during the total lactation period is the time of the more likely to be exposed to lack of energy, protein, minerals. To solve this problem, the early-lactation cows should be sufficiently supplied the required nutrients and should maximum intake the supplied nutrients not to be suddenly decline body weight and BCS from postparturition to the peak production of milk. To maximize the dry matter intake of a cow, there is have got to improve the management of body weight for heifer's skeletal development and in the dry period which is carelessly deal by mostly farms. This study presents that the use of measurement of body weight, graph of body condition score, distribution of milk production, metabolic profiles test in the monitoring for dairy herd health management is very valuable.

• 아시안잔디학회지
• /
• 제12권4호
• /
• pp.211-220
• /
• 1998

Cellulose-degrading fungi were idenfied as Rhizoctonia solani AG2-2(IV), T. harzianum and C. cochliodes. Rhizoctonia solani AG2-2(IV) grows better in the acidified media of pH 4 and 5 than pH 6 and 7. Mycelial growth of T. harzianum and C. cochliodes was also higher in pH 4 and 5 than in pH 6 and 7. In order to relate the above findings to nutrient utilization, mycelial growth of R. solani AG2-2(IV) are evaluated with various carbon sources. R. solani AG2-2(IV) grows well in the order of mannose, cellobiose, glucose, xylose and arabinose. However, mycelial dry weights of T. harzianum were 98.7, 78.0, 72.3, 43.7 and 32.3mg in glucose, mannose, cellobiose, xylose, and arabinose, respectively. Mycelial dry weight of C. cochilodes was 118, 65, 57, 49, and 16mg in mannose, cellobiose, xylose, glucose, and arabinose, respectively. Result of cellulase assay of R. solani AG2-2(IV) and soil fungi was reffered as, R. solani AG2-2(IV) produced more cellulase on CMC substrate than on CEL and secretes more enzyme in floated condition than in water-immersed condition. T. harzianum secreted less amount of cellulase than R. solani AG2-2 and C. cochliodes. T. harzianum produced no enzyme on CEL under water-immersed condition. C. cochliodes produced similar amounts of cellulase on either CMC or CEL under both water-immersed and floated condition.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.1-8
• /
• 1999

The use of structural wood based panels like plywood, OSB in many applications involves the use of nails, and data on the performance of panel-nail connection are needed for design and comparative purpose. This study was carried out to develop basic information on nail performance(withdrawal, embedding, nailhead push through) with water absorption in plywood and OSB. In withdrawal resistance test, initial stiffness of plywood performed better than OSB in 24hr soaked condition. The soaked condition reduced average nail withdrawal resistance value about 46% (12d mail), 53%(8d nail) in OSB, 17%(12d mail), 24%(8d mail) in plywood. The nail embedding strength of plywood also performed better than that of OSB and retention value(wet strength/dry strength) yielded similar in each nail types. The nail head push through capacity of OSB was higher than that of plywood in dry condition, but equal or lower in soaked condition. Therefore, critical consideration about structural panels is required in moist applications. The average values of nail withdrawal, nail embedding strength and nail head push through resistance of tested materials meet the minimum requirement of various specification and standards.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.382-387
• /
• 2005

An electrochemical evaluation on the corrosion resistance for heavy anticorrosive paint was carried out for 5 kinds of heavy anticorrosive paints such as High solid epoxy(HE), Solvent epoxy(SE), Tar epoxy(TE), Phenol epoxy(PE), and Ceramic epoxy(CE) as parameters of DFT(Dry Film Thickness, 25${\mu}m$50${\mu}m$, solution condition(Flow of Nonflow). Corrosion current density of HE(DFT 50${\mu}m$ in case of flow condition was larger than that of nonflow condition. However, their values of the other anticorrosive paints were decreased compared to the nonflow condition. The values of AC impedance were increased with increasing of DFT regardless of kinds of anticorrosive paints. And the polarization resistance of cyclic voltammogram showed a good tendency to correspond with well the values of AC impedance measurement. HE and CE had a relatively good corrosion resistance than other heavy anticorrosive paint.