• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.383-386
• /
• 2003

In this study, the MMA-modified paste mixed waste rubber powder, which has a small elastic modulus and a large modification, was produced by using the soft unsaturated polyester resin(UP) as a binder. Then the adhesive properties according to the matrices in both underwater and air-dry conditions and the hardening shrinkage according to the contents of shrinkage reducing agent(SRA) and of MMA were surveyed. The experimental results show that, regardless of humidity of matrices the adhesive strength of polymer concrete was larger than cement concrete. the adhesive strength of MMA content of 20% was larger than MMA content of 30%. regardless of matrix materials the adhesive strength in water condition were $20{\sim}30%$ comparing with the air-dry condition. The case of MMA content of 20% showed the largest adhesive strength. In the hardening shrinkage experiment, the hardening shrinkage reduced as MMA and SRA contents increased, and the decrease of the hardening shrinkage by SRA was larger.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.725-726
• /
• 2010

• 농업과학연구
• /
• 제37권2호
• /
• pp.267-270
• /
• 2010

This study was carried out to manufacture black charcoal board from domestic wood waste by using serum protein adhesive which is natural, environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis. The particle size of charcoal from domestic wood waste for this study was #6-60. Hot pressing schedule was $170^{\circ}C$ and 40kgf/$cm^2$ (1 min)-10kgf/$cm^2$ (2.5 min)-40kgf/$cm^2$ (5 min). The black charcoal board made by the addition of 13% serum protein adhesive on dry weight basis gave 41.76kgf/$cm^2$ of bending strength, 8.12kgf/$cm^2$ of internal bonding strength, and excellent gas adsorption and workability.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.144-149
• /
• 2015

Nothobranchius guentheri and Nothobranchius patrizii have special life cycle to sustain the dry season. So, we investigated the fertilized eggs morphology, and compared ultrastructures of surface structures and the cross section of fertilized egg envelopes using light and electron microscopes to determine whether these fertilized eggs and egg envelopes show the species specificity or have special structure to sustain the dry season. These fertilized eggs were spherical, yellowish, demersal and adhesive, and had a one-sided large oil droplet. The whip-like structures, adhesive filament were distributed throughout egg envelope in both species. But, that of N. guentheri was covered with fibrous structures, and that of N. patrizii was smooth. The egg envelope consisted of two distinct layers: an outer, electron-dense layer containing adhesive filaments and an inner layer of 16 to 17 horizontal electron-dense lamellae alternating with 15 to 16 interlamellae of lower electron density in both species. The external shapes of fertilized egg and section of fertilized egg envelope were same, but ultrastructure of adhesive filaments on the outer surface was concluded to show species specificity. Our data indicate that the ultrastructural differences of adhesive filament and outer surface of fertilized egg envelope show species specificity although these species belong to same genus.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.11-19
• /
• 2021

본 연구는 타일 떠붙임 시멘트 모르타르의 시멘트 : 잔골재의 혼합 비율인 모르타르 배합비에 따른 품질 특성 및 시공성에 대한 관능 평가를 실시한 것이다. 즉, 타일 시공 후 타일 탈락 하자와 관련한 타일 부착량 및 바탕 부착 하중 시험을 통해 타일 떠붙임 시공 시 콘크리트 바탕면과 타일면의 부착 성상이 서로 다른 것을 알 수 있었다. 또한, 시공성에 관한 관능 평가 결과 타일 떠붙임 모르타르의 시멘트에 대한 잔골재의 질량 비율인 S/C 6 이상은 도기질 타일과의 초기 부착성은 우수하나, 마감 조정성이 불량하고, 바탕면에서 처짐 발생 우려가 있다. 반면, S/C 4 이하는 마감 조정성은 좋으나, 초기 부착성이 저하하고, 바탕면에서 점성에 의한 처짐 등으로 시공성이 저하하며, 부착강도가 저하하여 타일과 모르타르의 계면 탈락 우려가 있는 것으로 평가되었다. 따라서 도기질 타일용 타일 떠붙임 모르타르의 우수한 품질 및 시공성을 확보하기 위해서는 S/C 5 전후가 가장 적정한 혼합 비율로 평가되었다.

• 센서학회지
• /
• 제32권1호
• /
• pp.31-38
• /
• 2023

Three-dimensional (3D) micro/nanostructures based on soft elastomers have received extensive attention in recent years, owing to their potential and advanced applicability. Designing and fabricating 3D micro/nanostructures are crucial for applications in diverse engineering fields, such as sensors, harvesting devices, functional surfaces, and adhesive patches. However, because of their structural complexity, fabricating soft-elastomer-based 3D micro/nanostructures with a low cost and simple process remains a challenge. Bio-inspired designs that mimic natural structures, or replicate their micro/nanostructure surfaces, have greatly benefited in terms of low-cost fabrication, scalability, and easy control of geometrical parameters. This review highlights recent advances in 3D micro/nanostructures inspired by nature for diverse potential and advanced applications, including flexible pressure sensors, energy-harvesting devices based on triboelectricity, superhydrophobic/-philic surfaces, and dry/wet adhesive patches.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.107-113
• /
• 2007

This study is to investigate adhesive properties depending on the temperature, humidity, and freeze-thraw of the Steel plate adhesive strengthening method by the epoxy resin. The results are summarized as following. For the temperature variation, the debonding failure appear only after 1 cycle of temperature varoation because the coefficient of thermal expansion of the epoxy resin is comparatively large, and the bonding strength is decreased. The deformation properties and ultrasonic pulse velocity on each materials are similar until 4 cycles on the dry and moisture test. As the freeze-thraw test, the epoxy resin is degraded easily subjected to freeze-thaw cycle, comparatively easy, so the debonding failure may occur in short term because of the freeze-thaw repeatition.p

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.273-277
• /
• 1995

This study presents the physical and adhesive properties of the top coated materials for concrete slab. i.e, cement based top coated materials. epoxy mortar. The purpose of this study offers the investigation of construction factors to affect the quality of the coated materials over hardened concrete. The experimental results shows that the water content 3% of sand decline the strength and adhesive properties of epoxy mortar, on the other hand, dry surface and curing for cement based material.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.540-547
• /
• 2001

This study has evaluated the wear behavior of PTA (Plasma Transferred Arc) Inconel 625 and Stellite 6 overlays on Nimonic 80A substrate. Nimonic 80A alloy was also included for comparison. In order to evaluate the wear performance, three-body abrasive wear test and pin-on-disk dry sliding wear test were performed. Microstructural development during the solidification of deposits is also discussed. Wear test results show that the wear rate of Stellite 6 deposit is lower than that of Inconel 625 deposit and Nimonic 80A. The sliding wear resistance of overlay deposits follows a similar trend to the abrasive wear resistance, but for Nimonic 80A. The main wear mechanisms were abrasive wear for Inconel 625 deposit, adhesive wear and delamination for Stellite 6 deposit in pin-on-disk dry sliding wear test and ploughing in three-body abrasive wear test. Cross sectional examinations of the worn surface of pin specimens after pin-on-disk dry sliding wear test implies that the plastic deformation near worn surface has occurred during the wear testing.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.449-449
• /
• 2011

We reported the direct effect of intrinsic surface energy of dry adhesive material to the Van der Waals and capillary forces contributions of the total adhesion force in an artificial gecko-inspired adhesion system. To mimic the gecko foot we fabricated tilted nanohairy structures using both lithography and ion beam treatment. The nanohairy structures were replicated from Si wafer mold using UV curable polymeric materials. The control of nanohairs slanting angles was based on the uniform linear argon ion irradiation to the nanohairy polymeric surface. The surface energy was studied utilizing subsequent conventional oxygen ion treatment on the nanohairy structures which resulted in gradient surface energy. Our shear adhesion test results were found in good agreement with the accepted Van der Waals and capillary forces theory in the gecko adhesion system. Surface energy would give a direct impact to the effective Hamaker constant in Van der Waals force and the filling angle (${\varphi}$) of water meniscus in capillary force contributions of gecko inspired adhesion system. With the increasing surface energy, the effective Hamaker constant also increased but the filling angle decreased, resulting in a competition between the two forces. Using a simple mathematical model, we compared our experimental results to show the quantitative contributions of Van der Waals and capillary forces in a single adhesion system on both hydrophobic and hydrophilic surfaces. We found that the Van der Waals force contributes about 82.75% and 89.97% to the total adhesion force on hydrophilic and hydrophobic test surfaces, respectively, while the remaining contribution was occupied by capillary force. We also showed that it is possible to design ultrahigh dry adhesive with adhesion strength of more than 10 times higher than apparent gecko adhesion force by controlling the surface energy and the slanting angle induced-contact line of dry adhesive the materials.