• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.777-783
• /
• 2006

본 연구에서는 상동지역 중석광 광미를 콘크리트용 혼화재료로 사용하기 위한 연구의 일환으로 자기충전 콘크리트의 분체로서 적용가능성을 검토하였다. 상동지역 중석광 광미를 혼합한 자기충전 콘크리트의 자기충전성을 평가는 일본의 토목학회 기준을 적용한 슬럼프플로우, 슬럼프플로우 500mm 도달시간, V-funnel 유하시간 및 U-box 충전높이 시험을 실시하여 검토하였다. 그 결과 슬럼프 플로우는 목표기준을 만족하였으며, 슬럼프플로우 500mm도달시간 및 V-funnel 유하시간은 상동지역 중석광 광미의 혼합률이 증가함에 따라 측정시간이 감소하였으며, U-box 충전높이는 상동지역 중석광 광미의 혼합률 30% 까지 목표기준을 만족하였다. KS 규준에 의해 평가된 역학적 특성 검토 결과는 압축강도의 경우 상동지역 중석광 광미의 혼합률이 증가함에 따라 압축강도는 감소하였고, 쪼갬인장강도 및 탄성계수는 기존의 연구 경향과 유사하였다. 건조수축률 및 탄산화 깊이는 상동지역 중석광 광미의 혼합률이 증가함에 따라 비례적으로 증가하는 경향을 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.83-86
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• Journal of Applied Biological Chemistry
• /
• 제48권4호
• /
• pp.213-217
• /
• 2005

Microbial hydrogel was prepared with poly(${\gamma}$-glutamic acid) produced from Bacillus subtilis BS62 using crosslinking reagent, ethylene glycol diglycidyl ether (EGDE), and its physico-chemical characteristics were examined. Hydrogel which prepared from 10 grams of 10% PGA solution with $600\;{\mu}l$ of EGDE at $50^{\circ}C$ for 17 h swelled 4,320 times its dry weight, and time to reach swelling equilibrium in deionized water at 4 to $45^{\circ}C$ range was about 20 h. Swollen hydrogel shrunk in ionic solutions, and rate of shrinkage was higher in calcium chloride solution than sodium chloride solution. Swelling rate of hydrogel increased 1.3-fold of initial swelling rate for 30 min at $80^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.99-107
• /
• 1997

This study was executed to test the possibility of replacement for domestic Japanese larch(Larix leptolepis) for hardwoods and to acquire the information about the effects of drying temperature on internal temperature, moisture content and drying defects. In high-temperature drying, internal temperature increased rapidly to boiling point, immediately after that point the internal temperature rising rate was reduced. In the case of drying at temperature of $125^{\circ}C$, internal temperature could reach at boiling point in a very short time. Moisture content in high-temperature drying showed constant drying rate period and first period of falling rate drying together in 4 hours since experiment begun. There was no strong correlation between initial moisture content and final moisture content. Average drying rate at $115^{\circ}C$, $120^{\circ}C$ and $125^{\circ}C$ was 1.42%/hr, 1.88%/hr and 2.02%/hr, respectively; the case of drying temperature of $125^{\circ}C$ showed most rapid drying rate. Drying rate of $125^{\circ}C$ was so rapid that it showed more severe shrinkage, bow, collapse, end check, and internal check development than in other drying conditions. The result of this study showed the strong possibility of high-temperature drying for Japanese larch, and to dry Japanese larch optimally, dry bulb temperature should not exceed $120^{\circ}C$.

• 한국농공학회지
• /
• 제42권6호
• /
• pp.90-97
• /
• 2000

In this study, the variation of unit weight and unconfined compressive strength were investigated, calcium carbonate, quicklime, portland cement, 19mm length monofilaments and fibrillated fiber were used as reinforcement materials. And calcium chloride was added to cement and calcium carbonate reinforced soil mixture in order to accelerate setting and hardening speed. It appears that unit weight is highest in calcium carbonate reinforced soil mixture with mixing rate of 9%. According to increasing the amount of fiber in soil mixture, the unit weight decreased. It shows that the more the amount of monofilament fiber is added in soil mixture, the higher the compressive strength is, but the compressive strength is decreased in fibrillated fibrillated fiber added soil mixture with more than 1.0% of mixing rate.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.484-489
• /
• 2000

This study was performed to examine the characteristic of creep behavior by reinforced clayey soil. So, it was carried out measurement of compressive strain and poisson's ratio by the reinforced soil mixtures. At each specimen was made by added calcium carbonate and 19mm length monofilaments into soil at designated ratio, and it was measured during the age of 30 days right after manufacturing the specimens. Because monofilaments controled increase of friction and dry shrinkage of soil into soil, compressive strain of monfilments reinforced soil with mixing rate of 0.3% is low value. And Because void was formed by compressive, vertical strain and horizontal strain of calcium carbonate reinforced soil with rate of 9% is high value.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.341-354
• /
• 2022

Treatment of solid waste building materials is a crucial method of disposal and an area of ongoing research. New standards for the treatment of solid waste building materials are necessary due to multisource features, huge quantities, and complicated compositions of solid waste. In this research, sustainable nanomaterial mixtures containing nano-paper waste (NPW) and nano-metakaolin (NMK) were used as a substitute for Portland cement. Portland cement was replaced with different ratios of NPW and NMK (0%, 4%, 8%, and 12% by weight of cement) while the cement-to-water ratio remained constant at 0.4 in all mortar mixtures. The fresh properties had a positive effect on them, and with the increase in the percentage of replacement, the fresh properties decreased. The results of compressive strength at 7 and 28 days and flexural strength at 28 days show that the nanomaterials improved the strength, but the results of NMK were better than those of NPW. The best replacement rate was 8%, followed by 4%, and finally 12% for both materials. The combination of NMK and NPW as a replacement (12% NMK + 12% NPW) showed less shrinkage than the others because of the high pozzolanic reactivity of the nanomaterials. The combination of NMK and NPW improved the microstructure by increasing the hydration volume and lowering the water in the cement matrix, as clearly observed in the C-S-H decomposition.

• Journal of the Korean Wood Science and Technology
• /
• 제14권3호
• /
• pp.3-15
• /
• 1986

본(本) 실험(實驗)은 이태리 포플라(Populus euramericana) 플리치(flitch)의 SDR (Saw-Dry-Rip) 방법(方法)과 대조재로서 평균각재(平均角材)를 사용하여 동일한 건조조건(乾燥條件)에서 양자간(兩者間) 건조속도(乾燥速度)와 건조결함(乾燥缺陷)의 발생정도를 비교코저 실시하였으며 두께 50mm인 평소각재(平小角材)와 플리치 건조(乾燥)스케쥴 T8-F4를 적용하여 함수율(含水率) 10%정도까지 열기건조(熱氣乾燥)하여 얻어진 결과(結果)는 다음과 같다. 1. 평균각재(平均角材)의 평균(平均) 건조속도(乾燥速度)는 0.41%/hr. 였으며 플리치의 평균(平均) 건조속도(乾燥速度)는 0.44%/hr. 였다. 2. 평균각재(平均角材)의 최종함수율(最終含水率)은 8.0%이고 플리치의 최종함수율(最終含水率)은 10.1%였다. 함수율분포(含水率分布)에 있어서 평소각재(平小角材)의 표층, 중간층 및 내층 의 평균함수율(平均含水率)은 각각 8.8%, 10.4%, 12.6%이고 플리치의 경우는 각각 10.6%, 12.9%, 16.3%였다. 3. 플리치의 SDR방법(方法)은 평소각재(平小角材)의 건조(乾燥)보다 길이굽음 20%, 너비굽음 25%, 측면(側面)굽음 54.9%, 비틀림 13.4% 감소되었다. 4. 수피(樹皮)인접부위의 평소각재(平小角材)의 길이굽음과 너비굽음은 수심(樹心)부위의 평소각재(平小角材)의 경우보다 감소되었으나 측면굽음과 비틀림은 오히려 증가되었다. 5. 평소각재(平小角材)의 표면할열(表面割裂)보다 적게 발생하였고 횡단면할열(橫斷面割裂)은 양자(兩者)간에 비슷한 경향을 보였다. 6. 평소각재(平小角材)와 플리치의 내부할열(內部割裂), 두께 수축율(收縮率) 및 찌그러짐은 서로 비슷한 경향을 나타내었다. 7. 평소각재(平小角材)의 표면경화율(表面硬化率)은 19.2%로서 플리치의 표면경화율(表面硬化率) 11.9%보다 컸었다.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.255-265
• /
• 2006

The purpose of this study was to examine the dyeing properties of four kinds of composite yams that were twisted in different processes. The composite yarns consist of acetate and functional polyester in ratio of 70 : 30. The composite yams were dyed at 100$^{circ}C$ and 125$^{circ}C$ using three types of dyes, disperse dyes for acetate fiber, PET fiber and PET-acetate blended fiber, in the three primary colors. The exhaustion($\%$) and K/S value were observed for each case. Also the effects of four different twisting processes to dyeing properties and physical properties were examined. Regardless of twisting methods, the composite yarns that were dyed at 125$^{circ}C$ had higher exhaustion($\%$) than those were dyed at 100$^{circ}C$ with all three types of dyes; However, tendency of the K/S value after reduction cleaning process was measured at 100$^{circ}C$ and the value measured 125$^{circ}C$ had a great difference with disperse dyes for acetate and dyes for PET. The difference of the K/S values of composite yarns, when dyed at 100$^{circ}C$ and 125$^{circ}C$ with disperse dyes for PET-acetate blended fiber, was almost negligible. According to twisting methods K/S values were in the following order: AP1 > AP3 > AP4> AP2. This means that AP1, treated at 220$^{circ}C$, had the highest K/S value and K/S value becomes higher as the yam is higher twisted and becomes lower as lower twisted. On the other hand, the dry shrinkage and wet shrinkage showed low shrinkage rate when the twist was high and steam setting temperature was high.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.8-15
• /
• 1990

This study was carried out to investigate the wood qualities for the end-use development of sycamore (Platanus occidentalis L.) grown in Korea. The results obtained were as follows: 1. The average length of wood fibers was l.56mm and the average width of annual rings was 9.5mm. It had very fast growth rate. 2. The specific gravity in air-dry was 0.66. The shrinkage and water absorption were relatively large. The shear and impact strengthes were very strong, while the compressive, tensile, and bending strengthes were weak in comparison to it's specific gravity. 3. The contents of ash, holocellulose, lignin were relatively high 0.74%, 83.08%, 28.79%, but that of pentosan was low 18.53%. 4. The expected uses of sycamore wood are plywood. fancy veneer, small furniture, musical instrument, door and window frame, tool handels, boxes, etc.