• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.34-39
• /
• 2024

With the fine particulate matter (PM) poses a serious threat to public health and the environment. The ultrafine PM in particular can cause serious problems. This study investigates the effectiveness of a submicron dry fog system in removing fine PM. Two methods are used to create fine dust particles: burning incense and utilizing an aerosol generator. Results indicate that the dry fog system effectively removes fine dust particles, with a removal efficiency of up to 81.9% for PM₁₀ and 61.9% for PM_2.5 after 30 minutes of operation. The dry fog, characterized by a mean size of approximately 1.5 ㎛, exhibits superior performance in comparison to traditional water spraying methods, attributed to reduced water consumption and increased contact probability between water droplets and dust particles. Furthermore, experiments with uniform-sized particles which sizes are 1 ㎛ and 2 ㎛ demonstrate the system's capability in removing ultrafine PM. The proposed submicron dry fog system shows promise for mitigating fine dust pollution in various industrial settings, offering advantages such as energy consumption and enhanced safety for workers and equipment.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.758-762
• /
• 1998

Electrical conduction property of insulator surface is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the materials to be used for outdoor insulator such as porcelain, EPDM, silicone rubber was discussed by measuring properties of average leakage current and scintillation discharge pulses under salt fog conditions. The fog was applied by nozzle in chamber and fogging fluids were deionized distilled water, 0.5wt% NaCI solution and 2wt% NaCl solution. The average leakage current showed linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage were much different to those in case of dry and clean condition with 2wt% salt fog. In case of slat fog pollution condition, the leakage current was increased above critical voltage. the scintillation discharges were also activated at the level. The leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.293-296
• /
• 1998

Surface electrical conduction in insulator is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the widely used materials for outdoor insulator - porcelain, EPDM, Silicone rubber - were discussed by measuring properties of average leakage current and scintillation discharge pulses under artificial contamination conditions. The artificial contaminations used were deionized distilled water fog, 0.5wt% NaCl salt fog of light pollution and 2wt% NaCl salt fog of medium pollution. The average leakage current was appeared linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage was most different to that in case of dry and clean condition. In case of salt fog pollution condition, The leakage current was increased above critical voltage. The scintillation discharges were also activated at the level. the leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 1998

Surface electrical conduction in insulator is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the widely used materials for outdoor insulator - porcelain, EPDM, Silicone rubber - were discussed by measuring properties of average leakage current and scintillation discharge pulses under artificial contamination conditions. The artificial contaminations used were deionized distilled water fog, 0.5wt% NaCl salt fog of light pollution and 2wt% NaCl salt fog of medium pollution. The average leakage current was appeared linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage was most different to that in case of dry and clean condition. In case of salt fog pollution condition. The leakage current was increased above critical voltage. The scintillation discharges were also activated at the level the leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• 한국방재안전학회논문집
• /
• 제11권2호
• /
• pp.69-74
• /
• 2018

환경적인 영향에 대해 민감하게 발생하는 안개는 특정 지역/시간대를 예측하기 어려워 시민의 안전에 대한 위험성을 가진다. 따라서 기존의 소극적이고 수동적인 대응방안이 아닌 건조공기와 음이온 응결핵을 통해 안개입자를 직접적으로 제거할 수 있는 안개제거장치를 이용한 백연성 안개 저감 기술을 제안하고자 한다. 이에 본 연구에서는 저류지 환경에서 자주 발생하는 백연성 안개에 대하여 안개제거장치를 이용한 저감 효과를 확인하고 기온 환경에 따른 영향성을 분석하고자 실험적 검증을 수행하였다. 동일한 환경 조건에서 100 m 거리에 위치한 표지판을 설치하여 가시거리를 비교하였다. 그 결과 30초 이내에 100 m 이상의 가시거리를 확보 가능하였으며 이것으로 안개저감효과가 효과적임을 확인할 수 있었다. 또한 기온 환경에 따라 온도가 낮을수록 백연성 안개가 크게 발생하였으나 기온 환경별 백연성 안개의 저감효과에 대한 영향성은 미미한 것을 확인하였다. 본 실험을 통해 안개제거장치를 이용하여 저류지환경에서 발생된 백연성 안개에 대한 저감 효과를 검증할 수 있었다.

• 유기물자원화
• /
• 제26권2호
• /
• pp.43-51
• /
• 2018

본 연구의 목적은 호기성 매립지에서 함수율 및 수분주입 방법이 폐기물 분해에 미치는 영향을 평가하는데 있다. 초기 함수율(20%, 30%, 40% 및 50%)이 매립 폐기물 분해에 미치는 영향을 평가하기 위해 호흡율 실험을 수행하였다. 그 결과 누적 산소소모량과 산소 소모율은 초기 함수율에 의해 크게 영향을 받는 것으로 나타났으며, 초기 함수율이 증가할수록 증가하였다. 둘째, 매립지 내부 수분주입 방법으로서 드라이포그 시스템의 효율을 평가하기 위해 모의매립 실험을 수행하였다. 실험 결과 수분의 수직 주입방법과 비교하여 드라이포그 시스템이 유기성 폐기물의 분해를 촉진함을 보여 주었다. 또한 드라이포그 시스템은 수직 주입방식보다 매립지 내부에서 더욱 균일한 수분 분포를 나타내었다.

• 한국분무공학회지
• /
• 제27권4호
• /
• pp.173-180
• /
• 2022

Cooling fog is being used in various parts of society such as fine dust reduction, cleanliness, and temperature drop. Cooling fog has the advantage of low flow rate and ease of use compared to other spray systems. In the case of cooling fog, it was confirmed that the injection angle increased as the pressure increased and the nozzle diameter increased. In this study, the minimum injection angle was 33.61 degrees and the maximum injection angle was 107.38 degrees. It was confirmed that the larger the nozzle diameter and the smaller the pressure, the larger the droplet size. In addition, it was confirmed that the Sauter Mean Diameter (SMD) increased along the X and Y axis directions. It was confirmed that the size of the droplet decreases as it approaches the nozzle tip due to the characteristics of the nozzle design factor.

• 한국환경과학회지
• /
• 제25권1호
• /
• pp.163-171
• /
• 2016

We analyzed the characteristics of fog formation in the Gumi Reservoir of Nakdong river with the field observation data for recent 2 years (1 April 2013~31 March 2015) collected by the national institute of meteorological research, KMA. In early morning, we frequently observe the steam rising from the water surface. The fog occurs from adding water vapor into the air. We call the fog as steam fog. Steam fogs occur when cold, dry air mixes with warm, moist air above a water surface. The steam fog appears mainly in autumn under the following conditions; (1) sensible heat is positive values ($10{\sim}20W/m^2$), (2) latent heat is more positive values ($25{\sim}35W/m^2$) than sensible heat, (3) cloudless nights with light winds (about 1.5 m/s), (4) under condition(3), mountainous winds easily blows into the reservoir.

• 생물환경조절학회지
• /
• 제27권2호
• /
• pp.103-110
• /
• 2018

본 연구는 하절기 '매향' 딸기 자묘의 삽목 번식에 적절한 관수 방법을 구명하기 위해 수행되었다. 딸기 자묘의 삽수는 24구 딸기 전용 포트(24구, $60{\times}34{\times}10cm$)에 상업용 혼합 상토(Tosilee)를 이용하여 삽목하고, 반 밀폐형 소형비닐터널에 위치시켰다. 각각의 반 밀폐형 소형터널의 처리는 다음과 같이 처리했다; 대조구(무처리), 두상관수(하루 두 번), 매트관수(하루 두 번), 그리고 안개관수(8:00시부터 18:00시까지 30분 온/오프 설정). 딸기 자묘는 반 밀폐형 소형터널 내에서 8일 동안 발근을 하였고, 그 이후 플라스틱 필름을 제거 하였다. 삽목 후 61일째에 초장, 근장, 1차 근수, 엽병장, 엽장, 엽폭, 크라운 직경, 엽록소 값, 엽면적, 지상부와 지하부의 생체중 및 건물중을 측정하였다. 터널 내의 하루 평균 상대습도는 각각 안개관수, 두상관수, 매트관수, 대조구 순으로 72.5, 56.3, 45.8, 그리고 29%를 나타냈다. 그러나 공기온도는 모든 처리에서 유사하였다. 딸기 자묘의 4일째와 8일째 발근율은 두상관수와 안개관수 처리에서 유의적으로 높았다. 초장, 엽병장, 크라운 직경, 엽면적은 두상관수와 안개관수 처리에서 높은 값을 나타냈다. 게다가 지상부의 생체중 및 건물중은 다른 처리에 비해 두상관수와 안개관수 처리에서 무거웠다. 지하부의 건물중은 안개관수 처리에서 유의적으로 무거웠다. 하지만 근장, 1차 근수, 엽록소 값, 지하부의 생체중은 모든 처리구에서 유의적인 차이를 나타내지 않았다. 결과적으로, '매향' 딸기의 삽목 번식 시 생육과 발근율은 두상관수와 안개관수 처리에서 가장 효과적인 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.36-41
• /
• 2003

This paper presents the results of power spectra using the fundamental and low frequency harmonic components of leakage current waveform to study aging on contaminated EPDM insulator(was serviced during 1997-2001, region Pohang, korea) under salt fog conditions. Experiments have been conducted in the chamber salt fog and at the 16KVrms. The salt contents adjusted as 0g,25g,50g and 75g per liter of deionized water. The onset of dry-band arcing on polymer insulators could be determined by signal processing the low frequency harmonics components. A correlation has been found between the fundamental and low harmonic components of power spectra on leakage current. Where aging could be associated with an increase in the level of both the fundamental and low frequency harmonics components of leakage current. Surface aging for contaminated EPDM insulators occurred when the fundamental component of leakage current was greater then some level On the other hand, when the polymer insulator approached failure, the fundamental component of leakage current reached relatively high values and low frequency harmonics components of the leakage current trended to decrease. The results suggest that both the fundamental and low frequency harmonics of leakage current can be used as a tool to determine both the beginning of aging and before flashover, end of life EPBM insulator in salt fog.