• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.179-207
• /
• 2000

Hazardous organic solvents management as prescribed by presidential decree in Korea is reviewed. The status of import, manufacture, and circulation of organic solvents was investigated. Problems inherent in the management of organic solvents in the electroplating, metal degreasing, and dry cleaning industries were discussed. The chemical substance management system in Korea was compared to those of foreign organizations. A walk-through check list was developed and then used to assess the actual conditions and potential hazards of chemical substances in these industries. The questionnaire could be used to develop a chemical management system and protect workers from hazardous substances. Based on the results of the site survey, MSDSs were not integrated appropriately into the workers education and were not readily accessible to employees. In the case of the dry cleaning industry, the new dry cleaning solvent used as a substitute includes a lot of potentially hazardous organic solvents. This research is preliminary. It is recommended that a national survey be performed to better identify the current situation. Because chemical substances are regulated by thirteen laws in seven executive branches, management systems often overlap, resulting in ineffective control. Using the above results, a model for managing chemical substances was developed. This will more efficiently provide MSDS information to workers covered by the presidential decree and allow the construction of a management system database for better cooperation with the executive branches in Korea.

• 박물관보존과학
• /
• 제3권
• /
• pp.29-36
• /
• 2001

강원도 원성군 호저면에서 출토된 조선시대 모자(충정관)를 보존처리하였다. 모자는 양모 펠트 직물로 구성되어 있었으며, 견섬유의 끈으로 장식되어 있었다. 처리 전의 모자는 심하게 오염되어 있었고 좀벌레에 의해 손상된 상태였다. 유물의 처리과정은 부드러운 붓과 핀셋으로 고형오염물을 제거한 후 유물을 지지할 수 있는 스테인레스 망을 이용하여 퍼클로로에틸렌으로 2차례에 걸쳐 건식세탁하였다. 여분의 용매는 압지법을 사용하여 제거하였다. 세탁 후 유물의 감량률은 7.99%, 세탁 전후 유물의 색차는 2.57을 나타냄으로써 유물에 부착되어 있던 각종 오염물들이 탈락되었으며, 모자의 외관이 깨끗해지고 밝아졌다. 세탁 후 견봉사를 이용하여 장식용 끈들을 제자리에 고정시키고 모자의 모양을 잡아주는 보수 작업을 실행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.315-316
• /
• 2006

A new cleaning robot system for live-line tension insulator string was developed to prevent an insulator failure, which can have severe effects on national security as well as national industry and economy. The robot moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water or water/air, the robot system adopts dry cleaning method using a rotating brush and a circular motion guide. This robot system has control architecture consisting of a master control unit and two slave control units. We confirmed its effectiveness through experiments.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.643-651
• /
• 2013

This study applied a laser cleaning method (dry cleaning) that is used for cleaning semiconductor elements to dental implant cleaning. The lasers used in this study were pulsed fiber lasers with wavelengths of 1,064 and 532 nm. The peak output, energy per pulse, energy density per pulse, time of pulse experiment, and number of pulse experiments served as process variables for this study, and the variables were changed for each experiment. As a result, a laser with a wavelength of 532 nm showed much higher cleaning efficiency than its 1,064 nm counterpart. As the wavelength range decreased, the quantized energy increased and the reflection rate of the titanium used for the implant decreased; consequently, the energy absorption rate increased. Therefore, it is proposed that the energy density by wavelength has a greater influence on cleaning than does the output size.

• 한국산업보건학회지
• /
• 제4권2호
• /
• pp.224-239
• /
• 1994

본 연구는 1993년 10월부터 1994년 3월 사이에 PCE를 세정제로 사용하는 세탁소중 충청권에 있는 23개소의 세탁소 작업자 30명을 폭로군으로, 모대학교 사무직원 42명을 비폭로군으로 하여 자각증상을 조사하였고, 세탁소 작업자의 PCE 폭로농도 및 작업장 기중농도를 측정하였다. 혈액과 뇨를 채취하여 혈액학적, 임상화학적 검사 및 뇨단백, 뇨당을 검사함으로써 PCE 폭로정도에 따른 관련성을 분석하여 다음과 같이 결과를 요약하고, 세탁소의 작업장 환경을 양호하게 관리하기 위한 몇가지 방안을 제안하고자 한다. 1. 폭로군이 비폭로군에 비해 조사항목 대부분에서 높은 자각증상 호소율을 나타냈으며, 특히 호흡기계, 심혈관계, 소화기계, 신경정신계에서 높은 자각증상을 호소했다. 개인폭로농도와 자각증상 호소율은 상호 관련성이 없었다. 2. 1일 8시간 작업시 PCE의 허용농도는 우리나라의 경우 50.0ppm, ACGIH에서는 25.0ppm으로 권장하고 있다. 조사대상 세탁소 형태별로 작업자의 PCE폭로농도는 체인본부가 16.85ppm, 일반 세탁소가 8.83ppm, 셀프-서비스점이 3.07ppm으로 나타났다. 전체적으로 세탁소 작업자의 PCE 폭로농도는 25.0ppm 이하가 19개소(82.6%)였으며, 25.0ppm 이상 측정된 세탁소는 4개소(17.4%)였고, 50.0ppm을 넘는 세탁소는 한 곳도 없었다. 이상의 결과에서 측정대상 세탁소의 작업환경 관리가 비교적 양호함을 알 수 있다. 3. PCE 기기의 가동횟수가 증가할수록 또한 작업량(세탁량)이 많아질수록 PCE 폭로정도는 증가하였다. 또 개방형 PCE 기기를 사용하는 작업자의 폭로농도는 6.18ppm, 밀폐형은 11.48ppm으로 나타났으나, 밀폐형을 사용하는 세탁소의 경우 개방형보다 작업량이 2-3배 정도 많았으며, 이 결과는 기기의 형태보다 작업량과 관계가 있는 것으로 나타났다. 4. 혈액학적 검사에서는 WBC, RBC, Hgb, Hct, MCV, MCH, MCHC, PLT 모두 정상으로 나타났으며, 혈액의 임상화학적 검사에서도 간기능, 신장기능 진단에 이용되는 GOT, GPT, ALP, U-A 및 LDH가 정상으로 나타났다. 5. 뇨단백 및 뇨당 검사에서는 대부분 정상이었고, 3명의 뇨단백이 30mg/dl 이하로 약간 배출되었으며, 뇨당은 3명이 100mg/dl 이하, 2명이 100-250mg/dl로 약간 높게 배출하였다. 이상의 결과에서 PCE 폭로군은 비폭로군보다 신체의 여러부분에 대해 높은 자각증상 호소율을 나타냈다. 조사대상 세탁소의 작업환경은 비교적 양호하게 관리되고 있었으며, 혈액학적 및 임상화학적 검사는 직업성으로 인해 이상이 유발되었다고 평가할만한 사실은 관찰되지 않았다. 그러나 세탁소에서는 PCE뿐만 아니라 얼룩을 제거하기 위하여 여러 종류의 유기용제를 사용하기 때문에 작업자들은 항상 위해한 환경 인자에 노출되고 있다고 사료되므로, 작업장 환경을 보다 쾌적하게 관리하기 위해서는 PCE의 기계적 누출을 조사하고, 의류의 충분한 건조, 적절하고 합리적인 환풍기의 가동 및 개인보호구 착용 등에 관심을 기울여야 할 것이다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.410-410
• /
• 1999

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1997년도 추계 학술대회 연제집
• /
• pp.217-219
• /
• 1997

• 보존과학회지
• /
• 제35권1호
• /
• pp.19-31
• /
• 2019

To study the cleaning effects and post-treatment stability assessment of various methods of cleaning textiles with metal thread, six naturally-soiled historical textiles with metal thread were investigated at the Metropolitan Museum of Art, New York. Prior to the cleaning of fabricated gold, silver, and copper thread that had been glued onto a paper substrate, the artificial deterioration was carried out in a controlled environment with light(UV and daylight), and temperature and humidity factors which would weaken and damage the samples. A synthetic soil mixture was applied to the samples to imitate soil found on the historic and archaeological textiles with metal thread; the cleaning effect and post-treatment assessment were investigated by use of three textile cleaning methods: mechanical cleaning, wet cleaning, and solvent cleaning. While investigating the naturally-soiled textiles with metal thread, it was determined that the soil colors and sizes of contaminating particles of each textile were different due to the diversity of original environmental factors and conditions. After cleaning with kneaded rubber, Stoddard solvent, n-decane or n-hexane, a bright, clean effect was apparent. Kneaded rubber was successful in picking up both large and small particles, but its stickiness caused some of the metal leaf to peel off. Stoddard solvent produced a good cleaning effect, but after use of n-hexane and n-decane in the cleaning process, a white layer of residue remained on the textile's surface. Wet cleaning was not effective and the rapid humidity changes between wet and dry conditions caused the edges of the paper substrate to lose their original shape.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.114-122
• /
• 2024

NF₃, Chamber cleaning gas, has a high Global Warming Potential (GWP) of 17,000, causing significant greenhouse effects. Reducing gas usage during the cleaning process is crucial while increasing the cleaning Rate and reducing cleaning standard deviation (Stdev). In a previous study with a 6-inch PECVD chamber, a multiple linear regression analysis showed that Power and Pressure had no significant effect on the cleaning Rate because of their P-values of 0.42 and 0.68. The weight for Flow is 11.55, and the weights for Power and Pressure are 1.4 and 0.7. Due to the limitations of the research equipment, which differed from those used in actual industrial settings, it was challenging to assess the effects in actual industrial environment. Therefore, to show an actual industrial environment, we conducted the cleaning process on a 12-inch PECVD chamber, which is production-level equipment, and quantitatively analyzed the effects of each variable. Power, Pressure, and NF3 Flow all had P-values close to 0, indicating strong statistical significance. The weight for Flow is 15.68, and the weights for Power and Pressure are 4.45 and 5.24, respectively, showing effects 3 and 7 times greater than those with the 6-inch equipment on the cleaning rate. Additionally, we analyzed the cleaning Stdev and derived that there is a trade-off between increasing the cleaning Rate and reducing the cleaning Stdev.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.143-144
• /
• 2006