• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.225-230
• /
• 2006

This study investigates drying condition when a small fan is added to a operating the free-breathing proton exchange membrane fuel cells (PEMFCs) with dry $H_2$ and Air. Polarization tests were conducted on PEMFCs at cell temperatures between 30 and $50^{\circ}C$ under dry operation. In the results, the cell performance strongly depended on the cell temperature and the cathode gas stoichiometric flow rates. The cell performance increases as cell temperature decreases from 50 to $30^{\circ}C$. In the domain where the stoichiometry of air is quite large, reduction of the concentration overpotential compensated the increased internal resistance due to drying. The maximum performance was obtained at the small air flow rate beyond which flooding occurs. This indicates that the fan should be operated in the stoichiometry domain with a well designed cell structure to avoid flooding.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.508-516
• /
• 1999

Polycrystalline powder of LixNi0.85Co0.15O2 was synthesized by pyrolyzing a powder precursor obtained by the PVA-precursor method. Coin cells of lithium-ion rechargeable battery were assembled, whose the cathodes were fabricated from the crystalline powders of LixNi0.85Co0.15O2 synthesized by the method. The effect of synthetic variation on the property of the cell was tested by carrying out 100 consecutive cycles of charge-dis-charge on the cells. The property of the cell was largely influenced by the pyrolysis conditions applied for the synthesis of the LixNi0.85Co0.15O2. Depending on whether the pyrolysis was carried out in standing air or in the flow of dry air, the discharge capacity and cycle-reversibility of the cell varied in large extent. When the powder precursor was pyrolyzed in standing air, a minor phase of lithium carbonate was remained in the LixNi0.85Co0.15O2. The carbon containing powder precursor had to be pyrolyzed in the flow of dry air to eliminate the minor phase. In the flow of dry air, the lithium carbonate in the precursor was eliminated over 500-700。C without any prominent heat event. By controlling the flow of air over the precursor during its pyrolysis, particle size could also be altered. The effect of flowing dry air, during first step pyrolysis or during second step heat treatment, on the property of the cell was discussed.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.9-16
• /
• 2009

Cylindrical dry forming mould was developed to carry out a feasibility study of dry forming of papers. The effect of disintegration, forming, humidification and pressing on dry formed papers was examined. Dry disintegrated fibers showed the similar fiber length distribution to wet disintegrated fibers, but they showed distorsion and damaged appearance on the surface. Process parameters required to form a uniform fiber pad was investigated. A proper screening and air dispersion method was selected that gives proper formation. Humidification and pressing conditions were examined to get a good dry formed papers in dry forming. Results showed that dry forming method can be used to make a sheets with reasonable formation and properties.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.836-845
• /
• 2017

Gravimetric method is usually used to evaluate air-dry density, which is governing physical or mechanical properties of wood. Although it had high evaluation accuracy, the method is time consuming process. Thus, this study was conducted to estimate air-dry density of wood with high accuracy by using polychromatic X-ray and digital detector as alternative of gravimetric method. To quantify polychromatic X-ray projection for evaluating air-dry density, Lambert-Beer's law with the integral value of probability function was used. The integral value was used as weighting factor in the law, and it was determined by conducting simple test at various penetration depths and tube voltage. Mass attenuation coefficient (MAC) of wood also calculated by investigating polychromatic X-ray projection according to species, penetration depth and tube voltage. The species had not an effect on change of MAC. Finally, an air-dry density of wood was estimated by applying the integral value, MAC and Lambert-Beer's law to polychromatic X-ray projection. As an example, the relation of the integral value (${\alpha}$) according to penetration depth (t, cm) at tube voltage of 35 kV was ${\alpha}=-0.00091t{\times}0.0184$ while the regression of the MAC (${\mu}$, $cm^2/g$) was ${\mu}=0.5414{\exp}(-0.0734t)$. When calculation of root mean squared error (RMSE) was performed to check the estimation accuracy, RMSE at 35, 45 and 55 kV was 0.010, 0.013 and $0.009g/cm^3$, respectively. However, partial RMSE in relation to air-dry density was varied according to tube voltage. The partial RMSE below air-dry density of $0.41g/cm^3$ was $0.008g/cm^3$ when tube voltage of 35 kV was used. Meanwhile, the partial RMSE above air-dry density of $0.41g/cm^3$ decreased as tube voltage increased. It was conclude that the accuracy of estimation with polychromatic X-ray and digital detector was quite high if the integral value and MAC of wood were determined precisely or a condition of examination was chosen properly. It was seemed that the estimation of air-dry density by using polychromatic X-ray system can supplant the gravimetric method.

• 한국식품저장유통학회지
• /
• 제7권4호
• /
• pp.389-394
• /
• 2000

단감의 수확 및 저장 중에 발생한 불량과실을 이용할 목적으로 분말화하기 위한 기초연구로서 본 실험을 행하였다. 일반성분 조성은 조단백질, 조지방, 조회분의 순으로 열풍건조 처리구는 0.9-1.1%, 15.0-39.0%, 2.3-3.3%이었으며, 동결건조 처리구는 1.3-2.2%, 27.0-49.0%, 2.5%로 나타났다. 무기성분 조성은 열풍과 동결건조 처리구 모두 potassium, magnesium, phosphorus; calcium, sodium이 주요 무기성분이었으며, 다른 미량원소는 약 3.00ppm 이하였다. 주요 지방산 조성은 열풍과 동결건조 처리구에서 capric acid, lauric acid tridecanoic acid, palmitic acid, palmitoleic acid, oleic acid, linoleic acid, linolenic acid 순으로 나타났다. 동결건조 처리구의 아미노산 조성은 aspartic acid, glutamic acid가 주요 아미노산이었다. 전체적으로 열풍건조 처리구보다는 동결 건조 처리구가 다소 높은 결과를 보였다. 열풍과 동결건조에 의한 분말 제조에서는 변색과 영양적인 측면을 고려할 때 열풍건조 보다는 동결건조가 우수한 결과를 보였으며, 열풍건조가 시간은 단축되었으나 얇게 펴서 건조해야 하는 단점이 있었으며, 단순한 열풍건조 만으로는 대량생산에 의한 분말 제조는 어렵고 좀더 보완적인 방법이 강구되어야할 것으로 생각된다. 이에 반해 동결건조에 의한 건조방법은 건조시간이 다소 걸리기는 했으나 딱딱해지거나 변색의 우려가 없으며 영양학적으로도 매우 안정적이었다. 이상의 결과를 평가해 볼 때 열풍건조에 의한 분말 제조는 구체적인 보완이 필요하며, 동결건조에 의한 분말 제조가 열풍건조에서보다 우수한 것으로 결과가 나타났다. 따라서, 파찌감의 분말건조 방법은 동결건조가 효율적일 것으로 생각된다.

• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.33-39
• /
• 2015

This paper examines the insulation performance of synthetic air and dry air. This examination was conducted based on dielectric strength in uniform and non-uniform field, electric field distribution by interior structure and defects in gas insulation switchgear (GIS) and insulation performance in different temperatures. From this review, it was found that eco-insulation gas required to possess low moisture content for power equipment in the distribution class. The results of this paper are valuable to ensure the insulation design and insulation reliability of GIS using air.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.93-101
• /
• 2016

This paper presents the surface discharge characteristics in Dry-Air on laminated epoxy solid dielectrics and conductive particles in order to provide the valuable information for the insulation design of eco- friendly gas insulated switchgear. To improve insulation performance, the three types of the laminated epoxy solid dielectrics were proposed, and it was revealed that their surface discharge characteristics were similar to the bakelite dielectrics of same-laminated types. From the surface discharge characteristics of dry air, it was demonstrated that the effect of conductive particles on surface discharge voltage was dominant when there are this particles at the shortest electrode gap and that the degradation of insulation performance on the conductive particles was evident in epoxy than teflon. These phenomena were interpreted in terms of particle-triggered discharge mechanism and electric field of triple junction, respectively.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.86-93
• /
• 2016

It is very desirable that a mixture gas possessing excellent insulation performance is suggested for insulation on increasing high voltage. This paper proposes a $SF_6$ mixture gas based on the factors including dielectric strength, environmental impact and economic feasibility of manufacture for the insulation in eco-friendly power equipment. A suitable-$SF_6$ content was determined to improve the dielectric strength in $N_2$ and Dry Air. The examination results of the factors revealed that a $SF_6$/Dry Air mixture gas possessing the $SF_6$ content was more appropriate than a $SF_6/N_2$ mixture gas to the eco-friendly power equipment. In addition to the selection of the suitable $SF_6$ mixture gas, insulation characteristics as a function of $SF_6$ content were described from electron-detachment mechanism.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1389-1390
• /
• 2007

SF6 gas used widely as insulating component is rising as the environment problem. Electrical breakdown characteristics of epoxy and dry-air composite insulation was investigated on thickness of epoxy and pressure of dry-air under non-uniform field. The gap of needle to plane was from 2mm to 5mm. The pressure of dry-air was varied within the range of $0.1{\sim}0.6$ MPa. The thickness of a needle was 1mm and the curvature radius of a needle end was 100um. The diameter of a plane made of the stainless steel was 50mm. As a result of the experiment, breakdown voltage was increased about 3 times when epoxy was used. The impact that the thickness of epoxy influences on breakdown voltage was poor. It needs suitable thickness computation because the insulating gap of the gas is short as epoxy thickness increases.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.255-258
• /
• 2007

본 연구는 현재 전력설비에 사용되고 있는 $SF_6$가스의 대체 절연가스로 건조공기(Dry-Air)의 절연파괴특성 연구를 위하여 모의 GIS 챔버와 AC 300[kV], DC(-) 150[kV] 전원장치로 교류 및 직류고전압을 인가하여 연구를 수행하였다. 평등전계인 구전극 대 구전극을 이용하여 $SF_6$ 가스와 건조공기(Dry-Air)의 절연내력을 비교하기 위해서 20, 30 및 40[N/$cm^2$ ]까지 가스의 압력변화를 주었고 각 압력별 전극간거리(d)에 따른 절연파괴전압($V_B$)을 연구하였다.