• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.125-135
• /
• 1996

Solid lipid nanoparticles(SLN) are particulate systems for parenteral drug administration and suitable for controlled release. SLN were prepared by homogenization process. Dispersion at increased temperature (molten lipid) was performed to yield SLN loaded with lipophilic drugs. Tetracaine base, lidocaine base, prednisolone, methyltestosterone and ethinylestradiol were used as model drugs to access the loading capacity and to study the release behavior. To investigate production parameters(lipids, surfactant concentration, homogenizing rpm) in the formation of SLN, particle size was performed by laser diffraction analysis. The mean particle size of SLN with stearic acid or trilaurin was below 1 micron. By decreasing the particle size and increasing the surfactant concentration, the release rate was increased especially in the case of highly lipophilic drug loaded SLN. Methyltestosterone or ethinylestradiol loaded SLN showed a distinctly prolonged release over a few days.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.4
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.213-217
• /
• 2007

It has been reported that hydrophobic additives generally decrease the release rate of protein drugs from drug delivery systems (DDS) and hydrophilic additives increase the release rate. In many cases, however, the addition of hydrophilic molecule is necessary for improving the stability of protein drugs. In the present work, the effects of hydrophilic additives on the release profiles, and micelle formation of protein drug formulations were investigated to develop a novel method for protein drug delivery. For model protein drug, bovine serum albumin (BSA) was employed and several hydrophilic additives were used in the release experiments. Hydrophilic additive D-sorbitol showed the lower release rates of BSA than other hydrophobic additives due to the gel strengthening ability of the additive and the optimum concentration of D-sorbitol was 3 w/v % for the retarded release rate. In addition, it was found that the addition of D-sorbitol was very effective for obtaining homogeneous and stable DDS. The results were discussed in terms of the micelle formation and the micelle structure, i.e., the differences in gel structure and the distribution of drugs in micelles.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.2
• /
• pp.105-110
• /
• 2008

Indapamide (4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoyl-benz-amide) is an oral antihypertensive diuretic agent indicated for the treatment of hypertensive. The diuretic and natriuretic effects are mainly due to the structure of o-chlorobenzenesulfonamide. The objective of this study was to formulate sustained release indapamide granules and assess their formulation variables. Granules were prepared by fluid bed coating method and consist of drug layer and membrane layer. The granules were coated with HPC and ethyl cellulose along with plasticizer dibuthyl sebacate. The release of indapamide depended on the type of Eudragit such as RS and NE 30 D used in the formulation controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for indapamide could be designed with satisfying drug release profile approved.

• YAKHAK HOEJI
• /
• v.36 no.3
• /
• pp.212-219
• /
• 1992

Although oral route is the most convenient route for drug administration, the short and variable transit of drug through GI tract restricts the sustained drug absorption after oral administration. Thus, for sustained absorption of drugs, it is desirable to prolong the GI transit time by retaining the dosage forms in the stomach. In this study, the enzyme-digestible swelling hydrogel was synthesized by heating the mixed solution of N-vinyl-2-pyrrolidone[monomer], acrylated albumin[crosslinking agent] and proxyphylline[drug] at $65^{\circ}C$ for 10 hours in the cylindrical test tube. The resultant hydrogel tablet (diameter; 0.77 cm, thickness; 0.47 cm) was designed to swell in the gastric fluid after oral administration to such a size that passing through the pylorus could be inhibited during the drug release. After releasing drug, the hydrogel was expected to be degraded by pepsin, an enzyme in the stomach, and eventually solubilized. Actually, the hydrogel synthesized in the study swelled to a size larger than the diameter of the pylorus ($1.3{\pm}0.7$ cm) and slowly digested in the presence of pepsin. Drug release from the hydrogel was prolonged up to about 12 hours. The swelling kinetics was dependent on albumin acrylation time, drug content and gel thickness. Particularly the gel thickness was the most important factor that influences on drug release. By adjusting these factors, the albumin-crosslinked hydrogel was expected to be retained in the stomach for up to 60 hours and used as a potential platform of drugs for long-term GI absorption.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.295.1-295.1
• /
• 2003

A suitable model for the estimation of the drug release from nanoparticles has been varied and problematic, especially for the release from lipid nanoparticles containing water-insoluble drugs, due to the difficult particle collection from the release medium. Dialysis membrane has been widely used for the release test from colloidal carrier systems. The amount of drug from the carriers in normal dialysis diffusion technique was very low typically. (omitted)

• Carbon letters
• /
• v.10 no.3
• /
• pp.208-212
• /
• 2009

Alginate-chitosan blend containing coconut-based activated carbon was prepared as a drug delivery carrier in order to improve the loading and releasing capacity of the drug. The activated carbon was incorporated as effective adsorbent for drug due to the extremely high surface area and pore volume, high adsorption capacity, micro porous structure and specific surface activity. Alginate-chitosan blend containing coconut-based activated carbon showed the sustained release for a longer period. Alginate-chitosan blend showed higher release of drug as the pH increased and higher release of drug as the content of chitosan decreased due to the pH-dependent solubility of blend components.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.439-446
• /
• 2013

Chitosan (CS) and hydroxypropylmethyl cellulose (HPMC) blend microspheres were prepared by water-in-oil emulsion technique and were loaded with an anti-cancer drug 5-fluorouracil (5-FU). CS-HPMC microspheres were characterized by Fourier transform infrared spectroscopy to confirm the cross-linking reaction. Scanning electron microscopy (SEM) was also used to assess the surface morphology of particles prepared. The quantity of release of 5-FU from the microspheres have been studied in terms of blend composition and amount of cross-linking agent. Differential scanning calorimetry and X-ray diffraction techniques indicated a uniform distribution of 5-FU particles in microspheres, whereas SEM suggested the spherical structure of the microspheres with slight rough surface. The in vitro drug release indicated that the particle size and release kinetics depend upon blend composition, amount of cross-linking agent used and amount of 5-FU present in the microspheres.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.22-29
• /
• 1997

Poloxamer-poly (acrylic acid) (PAA) interpenetrating polymer networks (IPNs) were prepared via matrix polymerization of acrylic acid with poloxamer prepolymer. The equilibrium s welling of poloxamer/PAA IPNs was determined in various pH medium. The swelling of poloxamer/PAA IPNs was more affected by pH difference compared with the swelling of homo PAA gel due to protonation and deprotonation of the PAA network, followed by reversible formation and dissociation of the interpolymer complex due to hydrogen bonding between acidic hydrogens and ether oxygens. Nonionic/anionic/cationic drugs were incorporated into IPN matriceds as a model drug and their release behavior was studied. Nonionic, drug revealed release patterns depending solely on pH dependent swelling kinetics. In contrast, the release of ionic drugs was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.4
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.