• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.26.2-26.2
• /
• 2009

A simple route of externalmechanical force is presented for enhancing the electrical properties ofpolymer nanocomposite consisted of nanowires. By dispersing ZnO nanowires inpolymer solution and drop casting on substrates, nanocomposite transistorscontaining ZnO nanowires are successfully fabricated. Even though the ZnOnanowires density is properly controlled for device fabrication, as-cast devicedoesn't show any detectablecurrents, because nanowires are separated far from each other with theinsulating polymer matrix intervening between them. Compared to the devicepressed at 300 kPa, the device pressed at 600 kPa currents increased by 50times showing the linear behavior against drain voltage and exhibits promisingelectrical properties, which operates in the depletion mode with highermobility and on-current. Such an improved device performance would be realizedby the contacts improvement and the increase of the number of electrical pathinduced by external force. This approach provides a viable solution for seriouscontact resistance problem of nanocomposite materials and promises for futuremanufacturing of high-performance devices.

• Advances in nano research
• /
• 제9권2호
• /
• pp.123-131
• /
• 2020

Conventional fabrics that have modified in to conductive fabrics using conductive nanomaterials have novel applications in different fields. These of fabrics can be used as heat generators with the help of the Joule heating mechanism, which is applicable in thermal therapy and to maintain the warmth in cold weather conditions in a wearable manner. A modified fabric can also be used as a sensor for body temperature measurements using the variation of resistance with respect to the body temperature deviations. In this study, polyol synthesized silver nanowires (Ag NWs) are incorporated to commercially available cotton fabrics by using drop casting method to modify the fabric as a thermogenic temperature sensor. The variation of sheet resistance of the fabrics with respect to the incorporated mass of Ag NWs was measured by four probe technique while the bulk resistance variation with respect to the temperature was measured using a standard ohm meter. Heat generation profiles of the fabrics were investigated using thermo graphic camera. Electrically conductive fabrics, fabricated by incorporating 30 mg of Ag NWs in 25 ㎠ area of cotton fabric can be heated up to a maximum steady state temperature of 45℃, using a commercially available 9 V battery.

• 센서학회지
• /
• 제26권6호
• /
• pp.379-385
• /
• 2017

In this study, an amperometric non-enzymatic glucose sensor was developed on the surface of a glassy carbon electrode by simply drop-casting the synthesized homogeneous suspension of hexagonal boron nitride (h-BN) nanosheets with a copper metal-organic framework (Cu-MOF) composite. Comprehensive analytical methods, including field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry, were used to investigate the surface and electrochemical characteristics of the h-BN-Cu-MOF composite. The FE-SEM, FT-IR, and XRD results showed that the h-BN-Cu-MOF composite was formed successfully and exhibited a good porous structure. The electrochemical results showed a sensor sensitivity of $18.1{\mu}A{\mu}M^{-1}cm^{-2}$ with a dynamic linearity range of $10-900{\mu}M$ glucose and a detection limit of $5.5{\mu}M$ glucose with a rapid turnaround time (less than 2 min). Additionally, the developed sensor exhibited satisfactory anti-interference ability against dopamine, ascorbic acid, uric acid, urea, and nitrate, and thus, can be applied to the design and development of non-enzymatic glucose sensors.

• 한국주조공학회지
• /
• 제27권4호
• /
• pp.167-172
• /
• 2007

In the present study, the microstructural evolution and mechanical properties of $Al_{71.6}Ge_{28.4}$ eutectic alloy have been investigated. Stable (fcc ${\alpha}$-Al and diamond cubic ${\beta}$-Ge) and various metastable crystalline (monoclinic, rhombohedral) phases were produced by competitive phase selection during non-equilibrium processing methods i.e. melt spinning and injection casting. The as-injection casted samples containing metastable-equilibrium eutectic (${\alpha}$-Al + monoclinic) structure showed much higher strength than samples with equilibrium eutectic (${\alpha}-Al+{\beta}-Ge$) structure but plasticity disappointingly diminished. In order to endow the enhanced ductility without significant strength drop, the alloys was heat-treated at transition temperature from metastable phase to stable phase. The annealed specimen displayed the phase transformed microstructural evolution and enhanced macroscopic plasticity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.376-376
• /
• 2011

I-III-VI2 chalcopyrite compounds, particularly copper, indium, gallium selenide(Cu(InxGa1-x)Se2, CIGS), are effective light-absorbing materials in thin-film solar application. They are direct band-gap semiconductors with correspondingly high optical absorption coefficients. Also they are stable under long-term excitation. CIS (CIGS) solar cell reached conversion efficiencies as high as 19.5%. Several methods to prepare CIS (CIGS) absorber films have been reported, such as co-evaporation, sputtering, selenization, and electrodeposition. Until now, co-evaporation is the most successful technique for the preparation of CIS (CIGS) in terms of solar efficiency, but it seems difficult to scale up. CIS solar cells have been hindered by high costs associated with a fabrication process. Therefore, inorganic colloidal ink suitable for a scalable coating process could be a key step in the development of low-cost solar cells. Here, we will present the preparation of CIS photo absorption layer by a solution process using novel metal precursors. Chalcopyrite copper indium diselenide (CuInSe2) nanocrystals ranging from 5 to 20nm in diameter were synthesized by arrested precipitation in solution. For the fabrication of CIS photo absorption layer, the CuInSe2 colloidal ink was prepared by dispersing in organic solvent and used to drop-casting on molybdenum substrate. We have characterized the nanoparticless and CIS layer by XRD, SEM, TEM, and ICP.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.189.2-189.2
• /
• 2013

1차원 산화아연 나노구조물은 광대역 에너지 밴드갭(~3.3 eV)과 독특한 물리적 특성을 갖고 있어, 전계효과 트랜지스터(field effect transistor), 발광다이오드(light emitting diode), 자외선 광검출기 (ultraviolet photodetector) 및 태양전지(photovoltaic cell)에 널리 이용되고 있다. 특히, 1차원 산화아연 나노구조물은 직접천이형 에너지 밴드갭(direct bandgap)을 갖고 있으며, 빛으로부터 여기된 전자가 1차원 나노구조물을 통해 향상된 이동경로를 제공할 수 있어서 차세대 자외선 광검출기 응용에 대한 연구가 활발히 진행되고 있다. 한편, 수열합성법(hydrothermal method)을 통해서 1차원 산화아연 나노구조물을 비교적 간단하고 저온공정을 통해서 합성할 수 있는데, 이를 광검출기 소자구조에 응용에서 양전극에 연결하기 위해서는 복잡하고 정교한 공정이 필요하다. 이에 본 연구에서는 수열합성법을 통해 합성된 산화아연 나노로드가 포함된 에탄올 용액을 금(Au) 패턴에 drop-casting을 통해서 간단한 방법으로 metal-semiconductor-metal (MSM) 광검출기를 제작하여 광반응 특성을 분석하였다. 또한 염료를 통해 가시광을 흡수하여 광전류(photocurrent)를 발생시킬 수 있도록 염료를 흡착한 산화아연 나노로드를 이용하여 같은 구조의 MSM 광검출기를 제작하여 가시광에 대한 광반응 특성을 관찰하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.380-380
• /
• 2013

본 논문에서는 외기 환경 요인 중에서 H2O와 O2의 영향으로 성능이 저하되는 유기박막트랜지스터(OTFT)의 수명시간 향상을 위하여 필요한 passivation layer의 효과에 대하여 알아 보았다. OTFT에 기존의 액상 공정이나 증착 공정으로 단일 passivation layer또는 다층 passivation layer를 형성하는 방식과는 다르게 향후에 산업 전반에 적용이 기대되는 것을 고려하여 제작 공정의 간편성을 위하여 film 형태로 되어 있는 열경화성 epoxy resin film으로 passivation layer를 구현하는 방법을 사용하여 OTFT의 storage stability를 평가하였다. passivation layer가 없는 OTFT와 열경화성 epoxy resin film으로 passivation된 OTFT의 전기적 특성이 서로 비교 평가되었으며 또한 30일 동안 온도 $25^{\circ}C$ 상대습도 40%의 환경을 갖는 Desicator 안에서 소자를 보관하여 시간에 따른 전기적 특성 변화를 검증하여 epoxy resin film의 passivation layer으로의 적용가능성을 검증하였다. 결과적으로 30일 후의 passivation layer가 없는 OTFT의 전기적 특성은 매우 낮게 떨어진 반면에 epoxy resin film으로 passivation layer가 구현된 OTFT의 mobility는 $0.060cm^2$/Vs, VT는 -0.18 V, on/off ratio는 $3.7{\times}10^3$으로 초기의 소자 특성이 잘 유지되는 결과를 얻었다. OTFT는 Flexible한 polyethersulfone (PES)기판에 게이트 전극이 하부에 있는 Bottom gate 구조로 제작되었고 채널 형성을 위한 유기반도체 재료로 6,13-bis (triisopropylsilylethynyl) (TIPS) pentacene이 사용되었고 spin coating된 Poly-4-vinylphenol (PVP)가 게이트 절연체로 사용되었다. 이때 Au전극은 Shadow mask를 이용하여 증착하였다. 또한 OTFT의 채널 길이 $100{\mu}m$, 채널 폭 $300{\mu}m$의 영역에 Drop casting법을 사용하여 채널을 형성하였다. 물리적 특성은 scanning electron microscopy (SEM), scanning probe microscopy (SPM), x-ray diffraction (XRD)를 사용하여 분석하였고, 전기적 특성은 Keithley-4200을 사용하여 추출하였다.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.647-654
• /
• 2015

Self-assembled monolayers(SAM) of microspheres such as silica and polystyrene(PS) beads have found widespread application in photonic crystals, sensors, and lithographic masks or templates. From a practical viewpoint, setting up a high-throughput process to form a SAM over large areas in a controllable manner is a key challenging issue. Various methods have been suggested including drop casting, spin coating, Langmuir Blodgett, and convective self-assembly(CSA) techniques. Among these, the CSA method has recently attracted attention due to its potential scalability to an automated high-throughput process. By controlling various parameters, this process can be precisely tuned to achieve well-ordered arrays of microspheres. In this study, using a restricted meniscus CSA method, we systematically investigate the effect of the processing parameters on the formation of large area self-assembled monolayers of PS beads. A way to provide hydrophilicity, a prerequisite for a CSA, to the surface of a hydrophobic photoresist layer, is presented in order to apply the SAM of the PS beads as a mask for photonic nanojet lithography.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.110-110
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value for lithiated silicon nanowire and a higher value for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value than that of the Si nanowire substrate by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The Young's modulus obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively higher value than lithiated silicon nanowire due to the elastically soft amorphous structures. The frictional forces acting on the tip sliding on the surface of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.

• 분석과학
• /
• 제8권4호
• /
• pp.675-682
• /
• 1995

Thin films of buckminsterfullerene($C_{60}$) formed by solution drop casting on Pt foil electrode surfaces were studied by cyclic voltammetry(CV) in acetonitrile(MeCN) containing quaternary ammonium or alkali-metal salts as supporting electrolyte. The electrochemical behaviors of $C_{60}$ films are found to be strongly dependent on the nature of the supporting electrolytes, especially with tetrabutyl ammonium perchlorate (TBAP, $NBu_4ClO_4$), and tetrabutyl ammonium tetrafluoroborate ($TBABF_4$, $NBu_4BF_4$). Reasonably stable films are formed into which electrons can be injected. The interaction of $C_{60}$ film with the quaternary ammonium cation may produce the fulleride salts $(TBA^+)(C{_{60}}^-)$ and $(TBA^+)_2(C{_{60}}^{2-})$. The bulk electroreduction with a controlled potential to generate the soluble $C{_{60}}^{3-}$ anions(dark red-brown color) is followed by electrooxidative deposition to produce a neutral $C_{60}$ film on the surface. The peak currents($I_{pc}$ and $I_{pa}$) of these thin film were dramatically decreased with repetitive potential scanning. These results could be explained by the adsorption-desorption phenomena and ion pairing interaction of reduced species($C{_{60}}^-$, and $C{_{60}}^{2-}$) onto the electrode surface. The peak current changes and peak potential shifts of the thin $C_{60}$ film in cyclic voltammograms formed from solution were observed by varying scan rates.