• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.518-521
• /
• 1998

This paper describes a 3.3V-65MHz 12BIT CMOS current-mode DAC designed with a 8 MSB current matirx stage and a 4 LSB binary weighting stage. The linearity errors caused by a voltage drop of the ground line and a threshold voltage mismatch of transistors have been reduced by the symmetrical routing method with ground line and the tree structure bias circuit, respectively. In order to realize a low glitch energy, a cascode current switch ahs been employed. The simulation results of the designed DAC show a coversion rate of 65MHz, a powr dissipation of 71.7mW, a DNL of .+-.0.2LSB and an INL of .+-.0.8LSB with a single powr supply of 3.3V for a CMOS 0.6.mu.m n-well technology.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.229-232
• /
• 2009

DC-shift phenomenon can be observed in Hybrid rocket combustion. This phenomenon makes performance drop which is structure problem or reduce thrust. Understanding of DC-shift phenomenon, the conditions of the hybrid rocket combustion stability can be found. In this paper, the condition of DC-shift was found and made by using acoustic mode and vortex shedding frequency. The conditions of stable combustion was defined from the experimental study of DC-shift phenomenon.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.522-525
• /
• 2009

DC-shift phenomenon can be observed in Hybrid rocket combustion. This phenomenon makes performance drop which is structure problem or reduce thrust. Understanding of DC-shift phenomenon, the condition of the hybrid rocket combustion stability can be found. In this paper, the condition of Negative DC-shift was found and made by changing oxidizer flow with pre-post chamber. The Negative C-shift phenomenon and characteristic were defined from the experimental study.

• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.81-92
• /
• 2000

This study is an investigation of the effect of cracks on the dynamical characteristics of a cantilever beam, having multiple open-edge transverse cracks. The flexibilities due to crack have been identified for several crack depths and locations. In the study the finite element method and component mode synthesis methods are used. Coupling the components is performed by a flexibility matrix taking into account the interaction forces. Each component is modelled by cantilever beam finite elements with two nodes and three degrees of freedom at each node. The results obtained lead to conclusion that, by using the drop in the natural frequencies and the change in the mode shapes, the presence and nature of cracks in a structure can be detected. There is some counter-evidence, however, that the effects due to multiple cracks may interact to make detection more difficult than for isolated cracks.

• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2007

The object of this research was to observe the female college 220 students of aged 19-24 for four years and to examine somatotypes distribution; this research intends to contribute to the fitness of clothes by studying the body distribution that affects the clothing structure. The measurement and wearing experiment for somatotypes are done years annually. The average, standard deviation and coefficient of variation was calculated by the SAS program. The research results are as follows: The three somatotypes of side view silhouette (straight type, bend-forward type, lean-back type) showed fairly even distribution. As a result of dressing experiment with the basic bodice pattern, the most influential factor on its suitability was found to be the neck area, shoulder and ease of bodice respectively. The partial body types to observe were categorized as: shoulder(normal, slope, squared), bust(A cup, B cup, C cup), hips (normal, droop, projecting). As for the result for full body type by BMI, normal type was most dominant, and for the categorization by drop, the type A which is with small breasts and large hips was most prevalent.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.890-893
• /
• 2006

Effects of the evaporation rate of MgO films using electron beam were investigated on the MgO properties and the discharge characteristics of the plasma display panel (PDP). The evaporation rate was changed from 3 ${\AA}/sec$ to 15 ${\AA}/sec$ at a substrate temperature of $300\;^{\circ}C$. MgO properties such as crystal orientation, surface roughness, contact angle, and film structure were inspected using XPS, AFM, drop shape analysis and SEM. We also studied the relation between MgO properties and PDP discharging characteristics. The minimum firing voltage and maximum efficacy were obtained at evaporation rate of 5 ${\AA}/sec$. In the MgO film deposited at 5 ${\AA}/sec$, (200) orientation was most intensive and surface roughness was minimum.

• Culinary science and hospitality research
• /
• v.8 no.1
• /
• pp.23-41
• /
• 2002

Ordinary, the hotel Career Development that cooks are hi red, then OJT and evaluation, disposition. It means that cook to set in order with licence and to carry-out effect But it is not continue forever about the job demand, attitude, ability of cook. The Executive Chef and depart of career development have to plan for problems now and a long time of time to cooks. Demand of cook career development are sociality and economical. Because the hotel needs a high-grade cook for keep competitive in changing surround. internal resources are more effect ive when require without delay man power than hire urgent. It is not only lack career development to cook, probably face up to retirement at one time and foment social order but also cook lose their a right to labor. Cook supports their family and grow, economic base for ethical by labor, so have to carry their point. In addition the domestic five stars hotel's career development structure are very simple and infirm, so it cause stagnation to position, lead to negative vision and show a drop in efficiency. Therefore the hotel must investment about Career Development.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.526-533
• /
• 2005

Reliability problem in inkjet printhead, one of MEMS devices, is also very important. To eject an ink drop, the temperature of heater must be high so that ink contacting with surface reaches above $280^{o}C$ on the instant. Its heater is embedded in the thin multi-layer in which several materials are deposited. MEMS processes are the main sources of residual stresses development. Residual stress is one of the factors reducing the reliability of MEMS devices. We measured residual stresses of single layers that consist of multilayer. FE analysis is performed using design of experiment(DOE). Transient analysis for heat transfer is performed to get a temperature distribution. And then static analysis is performed with the temperature distribution obtained by heat transfer analysis and the measured residual stresses to get a stress distribution in the structure. Although the residual stress is bigger than thermal stress, thermal stress is more influential on fatigue life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.34-38
• /
• 2005

This is a widespread requirement for low cost lightweight thermal imaging sensors for both military and civilian applications. Today, a large number of uncooled infrared detector developments are under progress due to the availability of silicon technology that enables realization of low cost IR sensor. System prices are continuing to drop, and swelling production volume will soon drive process substantially lower. The feasibility of micromechanical optical and infrared (IR) detection using microcantilevers is demonstrated. Microcantilevers provide a simple Structurefor developing single- and multi-element sensors for visible and infrared radiation that are smaller, more sensitive and lower in cost than quantum or thermal detectors. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress originating from the bimetallic effect. This paper reports a micromachined silicon uncooled thermal imager intended for applications in automated process control. This paper presents the design, fabrication, and the behavior of cantilever for thermomechanical sensing.

• Journal of Plant Biotechnology
• /
• v.30 no.2
• /
• pp.195-199
• /
• 2003

Extracts of Escherichia coli as a elicit were treated to suspension cultures of Streptanthus tostus in order to observe the effect on the pholem development. By the elicit treatment, cell wall, sieve endoplasmic reticulum (SER) and p-protein were normally synthesized, but the structure of amyloplast was changed from a round form to irregular and swollen unhalthy form with a tiny starch granular. Oil drops were new synthesized and accumulated in a large oleoplast and proteins were also accumulated in a single membrane. The concentration of sucrose in the phloem, which was induced during the elicit treatment, was higher than normally developed phloem cells. These results suggest that phloem cells might be changed in the normal cycles of metabolism of lipids, carbohydrates and proteins to overcome during the eilicit stress.