• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.531-542
• /
• 2017

강선이나 강화플라스틱선 등의 선박 재료는 선박안전법에 규정된 규격재료를 사용하는 경우로서 판두께 측정시험이나 종굽힘강도시험을 통하여 제작 선체의 구조 안전성을 쉽게 확인할 수 있다. 한편, 염가의 폴리에틸렌 등과 같은 비규격재료를 선체 전장이 짧은 플레저 보트의 선체로 사용하는 경우 역학적 특성을 파악하기 쉬워 선체 설계를 수행하기에 매우 유리하고, 대량 생산 시스템을 갖추는 경우 제작 비용이 낮아 해당 제품의 가격 경쟁력을 가질 수 있다. 그러나 폴리에틸렌 선체의 경우 비규격재료를 사용함에 따라 기존의 소형선체에 대한 종굽힘강도시험을 이용하여 선체의 구조 안전성을 평가할 수 없다. 이러한 문제점을 해결하기 위하여 본 연구에서는 플레저 보트의 낙하시험 표준절차인 플레저 보트 검사 기준과 ISO 12215-5를 기초로 폴리에틸렌 선체에 대한 낙하시험을 수행한 후 이것을 기초로 정적구조해석을 수행하여 비규격재료로 개발된 선체의 구조 안전성을 확인함으로서 플레저 보트 검사 기준과 ISO 12215-5의 낙하시험방법이 선체 구조설계에 이용될 수 있음을 보였다.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.887-895
• /
• 2014

The study provides baseline data on developing ready-to-wear clothes for adult females in their twenties who have finished shaping their bodies and have realized an ideal shape. We analyzed the data from females aged from 20 to 29 in "The $5^{th}$ Size Korea Survey" and "The $6^{th}$ Size Korea Survey", and sorted body shapes into several types according to drop values before analyzing and comparing the characteristics among groups. We also referred to the change by year in the size of upper inner wear. To classify body shapes, three drop values were assigned for bust girth - waist girth, hip girth - waist girth, hip girth - bust girth; through cluster analysis all data were classified into three body types. Type 1 is more like normal body shapes with small drop values at the bust girth - waist girth and well-build lower body. Type 2 is X-shaped body shaped like a fiddle with big drop values at all parts. Type 3 is Y-shaped body with a big drop value at the bust girth - waist girth and well-build upper body. Type 2, X-shaped body, has the majority of distribution in every year, which proved to be the most idealistic body shape. There was a change in the brassiere cup size. Korean ladies in their twenties have larger breasts. The body shapes of Korean females in their twenties are increasingly like those of westerners. Bust girth is a very critical element to set measurements and design patterns for upper wear; consequently, a change in the size of breasts should be considered.

• 한국운동역학회지
• /
• 제25권1호
• /
• pp.49-56
• /
• 2015

Objectives : The purpose of this study was to present quantitative data and basic references to decrease the accident risk of soccer instructors. Methods : To obtain data, we conducted an investigation on how H/Q ratio affects the dynamic stability of the lower extremity at the time of drop landing. The study targeted 13 soccer players from C University who have not had any injuries or wounds in the lower extremity joints and in any other parts of their bodies over the last 6 months. By using CMIS (USA), the players were divided into two groups according to H/Q ratios higher and lower than 69%, respectively. The subjects in each group were instructed to perform a drop landing. Results : The H/Q ratio did not affect the maximal flexion angle of the knee joints at the time of drop landing. In addition the dominant group with a relatively high H/Q ratio was observed to have increased time to reduce shock and to efficiently absorb the ground reaction force during drop landing. Also, the dominant group with a relatively high H/Q ratio utilized the strong performances of the antagonistic muscles around the hamstrings and the controlled rotatory powers of the thighs that were applied to the tibias supported by the ground. Finally, H/Q ratio, load factors, and mean and maximum EMG were significantly negatively related, whereas GRFx showed a positive relationship. In fact, these factors all affected the impact of the load from the H/Q ratio to the knee joints. Conclusion : From these findings it can be concluded that unbalanced H/Q ratio can be considered as a predictor of knee joint injury at the time of drop landing.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2277-2288
• /
• 1996

This study was performed to analyze the cooling effect of heated ribs which are frequently used for cooling of electronic parts, using the numerical method. To prevent the excessive pressure drop due to turbulence promoters for the enhancement of heat transfer rate especially, the effect of the angle of turbulence promoter was investigated by the numerical analysis. Heat transfer rate with turbulence promoters with rectangular cross-section increased by 13% in average, but the coefficient of pressure drop increased by 1.68 times than that without them. In the present study, triangular cross-sectional shape turbulence promoters were suggested and numerically tested. Pressure drop of turbulence promoter with the 30 degree triangular cross-sectional shape decreased by 30% from that of rectangular cross-section promoters while heat transfer rate was almost the same. While with 4 turbulence promoters, the heat transfer rate increased by 21%, the pressure drop increased 4 times. It means that the higher capacity of cooling fan should be needed. With the triangular cross-sectional shape, the size of vortex region at the rear of promoters became considerably smaller, so pressure drop became smaller. The effect of the change of cross-sectional shape was not found in the flow pattern near the ribs, so that heat transfer characteristics in the ribs were not changed.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2463-2469
• /
• 2011

이동전화기의 낙하 충격 시 디스플레이 모듈의 파손은 이동전화기의 재료, 강성 및 형상에 의하여 많은 영향을 받는다. 이동전화기 개발의 초기 단계에서는, 디스플레이 모듈의 내구성을 판단하기 위하여 모듈을 지그에 장착하여 낙하시험을 수행한다. 본 연구에서는 OLED 모듈의 충격 시험을 수행하기 위한 지그를 개발하였다. 지그의 재료, 두께 및 리브의 개수와 방향 등을 설계변수로 고려하여 실제 이동전화기가 낙하할 때 OLED 모듈이 받는 충격 응력과 가장 유사한 응력이 발생하도록 지그를 개발하였다. ABAQUS/Explicit를 사용한 1.5m 높이 충격 해석에서, 개발된 지그에 장착된 OLED 모듈의 유리에서 발생하는 최대주응력은 이동전화기에 장착된 동일 모듈의 유리에서 발생하는 최대주응력과 유사함을 확인할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.268-273
• /
• 2015

While analyzing the specimens before and after the thermal shock test, we found that the power drop rate of the bare cell was 5.08%, while the power drop rate of the ribboned cell was 16.49%. In comparative terms, the efficiency was lower at the ribboned cell than at the bare cell. While analyzing through EL (Electroluminescence) shots and cross sections, we tried to decipher the exact cause of the power drop. Although mere color change of the cell was observed at the surface of the bare cell, no abnormality could be found inside the cell. On the surface of the ribboned cell, the short circuit of gridfinger extended from the front part of the front electrode of the ribboned cells. Therefore, cracks occurred on the surface of the cell. Cracks also appeared inside the cell. While analyzing the I-V curve, we determined an increase in the leakage current and an increase of resistances in series in the bare cell. In the ribboned cell, the resistances in parallel reduced remarkably. An increase of resistances in series could also be verified. Conclusively, we deduced that the power drop rate in the bare cell is a life span of the cell itself; aging is the cause of power drop rate in cells. In case of ribboned cell, the power drop rate was directly influenced by internal cracks and an intermetallic compound layer joining the ribbon at the front electrode.

• 대한전자공학회논문지TC
• /
• 제39권2호
• /
• pp.59-68
• /
• 2002

본 논문에서는 사이클 패킷 폐기 기법인 적응적 사이클 패킷 폐기 기법과 비적응적 사이클 패킷 폐기 기법을 RIO와 함께 비교하고 분석하였다. 이러한 기법 중에 적응적 사이클 패킷 폐기기법은 사이클 사이의 트래픽 패턴을 분석하여 혼잡제어시에 패킷폐기를 적응적으로 처리함으로써 RIO의 단점을 보완하고, NCPD의 예측 가능한 대역폭 낭비를 최소화하였다. 본 논문에서는 두 사이클 패킷 폐기 기법에 대한 모델링을 제공하고, 망 트래픽의 상태에 따라 동적으로 변하는 전송가능 우선순위와 연계하여 시뮬레이션을 수행하여 처리율과 패킷 폐기율을 분석하였다. 분석을 통하여 두 알고리즘은 트래픽의 부하에 상관없이 RIO 보다 우선순위를 엄격하게 적용하고 우선순위에 따른 패킷 전송 능력이 개선되었음을 증명하였다. 특히 적응적 사이클 패킷 폐기 기법이 다른 기법보다 엄격한 패킷 폐기 정책을 유지하고 우선순위 측면에서 보다 좋은 성능을 나타내었다.

• 복식문화연구
• /
• 제15권1호
• /
• pp.137-151
• /
• 2007

This study was performed to narrow down the Sizing System for Female Adult's garments(KS K 0051) following age target and body shapes. The study was based on the sizing system and the anthropometric measurements, called Size-Korea, which were surveyed in the years 2003 and 2004. At first, the subjects of the survey were classified into 4 age groups, $18{\sim}24,\;25{\sim}34,\;35{\sim}49\;and\;50{\sim}59$, based on the most significant differences of body sizes. Secondly, the ranges of four key dimensions - height, bust, waist and hip-of normal sizes were identified through analyzing Rohrer index and percentile. The selected sizes within the ranges were grouped by the drop which was the subtraction of bust girth from hip girth. In conclusion, there was the most frequent drop for each age group; 9cm drop for the $18{\sim}24$ years old group, the 6cm drop for the $25{\sim}34$ years old and $35{\sim}49$ years old and 3cm drop for $50{\sim}59$ years old. The upper body garment sizes of the same drop and target ages could be merged to 10 to 12 sizes, which were remarkably smaller than the Female Adult garment sizing system, and further to 2-5 sizes, considering the percentile importance. However, $50{\sim}59$ years old group needed to be analyzed in different ways, because the number of subjects of normal size in the age decreased rapidly, that the normal sizes for them were very limited. In addition, the reference body sizes of each garment size were apparently different when they were compared to each age groups. These basic data for garment size specification could be usefully adapted for the apparel companies' own sizing system according to their age target and body shapes, to achieve efficient production and better fit.

• 정보처리학회논문지C
• /
• 제9C권5호
• /
• pp.783-788
• /
• 2002

적응적 패킷 폐기 기법과 비적응적 패킷 폐기 기법은 차별화된 서비스에서 사용하는 RIO 메커니즘보다 엄격한 패킷 폐기 기능을 제공한다. 특히 적응적 사이클 패킷 폐기기법은 사이클 사이의 트래픽 패턴을 분석하여 혼잡제어시에 패킷폐기를 적응적으로 처리함으로써 우선 순위 처리면에서 우수하다. 본 논문에서는 두 알고리즘에 대한 모델링을 제공하고, 망 트래픽의 상태에 따라 동적으로 변하는 전송가능 우선순위와 연계하여 시뮬레이션을 수행하여 처리율과 패킷 폐기율을 분석하였다. 분석을 통하여 두 알고리즘은 트래픽의 부하에 상관없이 RIO 보다 우선순위를 엄격하게 적용하고 우선순위에 따른 패킷 전송 능력이 개선되었음을 증명하였다. 특히 적응적 사이클 패킷 폐기 기법이 RIO 또는 비적응적 사이클 패킷 폐기 기법보다 엄격한 패킷 폐기 정책을 유지하고 우선순위 측면에서 보다 좋은 성능을 나타내었다.

• 청정기술
• /
• 제24권4호
• /
• pp.301-306
• /
• 2018

최근 미세먼지의 증가로 인해 디젤 자동차로부터 발생되는 PM에 대한 규제가 강화되고 있다. 디젤 자동차의 배기가스를 제거하는 후처리 장치인 매연여과장치(diesel particulate filter, DPF)에 대한 관심이 급증하고 있다. 따라서 DPF 효율 향상의 하나로 DPF 내의 압력강하를 줄여서 필터 및 재생(Regeneration)의 효율을 증가시키고 있다. 본 연구에서는 ANSYS FLUENT를 이용하여 5.66" SiC와 Cordierite DPF의 셀 밀도, 채널 형상, 벽두께, 입 출구 채널 비에 따른 압력강하 영향을 시뮬레이션했다. 실험결과로서 200 CPSI보다 300 CPSI에서 압력강하가 작게 나타났으며, Anisotropy과 O/S 셀이 Isotropy보다 약 1,301 Pa 작은 압력강하를 나타냈다. 공극률은 10% 증가할 때 마다 압력강하가 약 300 Pa씩 작아졌고, 벽 두께에 따른 영향은 0.05 mm 두꺼워질수록 약 500 Pa 씩 커지는 경향을 나타냈다.