• Membrane Journal
• /
• v.8 no.4
• /
• pp.203-209
• /
• 1998

The cutting oil emulsion microfiltration was carried out on dead-end call and crossflow systems equipped with 0.22 $\mu$m GVHP Millipore and 0.2 m stainless steel Mott microfiltration membranes, respectivdy. The oil drop size in the emulsion was varied from 0.07 to 0.22 $\mu$m. Cake filtration(CFM) and standard pore blocking models(SPBM) were applied to predict the permeation flux. The permeation fluxes of 0.01 vol% oil emulsion followed CFM for dead-end system very well under the condition of 400 rpm and below 100 kPa. The SPBM was, however, suitable for the permeation flux at 400 rpm and above 150 kPa. The oil layer on the membrane surface was destroyed and reproduced repeatedly as operating pressure was suddenly changed from 60 to 200 kPa, and then returned to 60 kPa. Also, we estimated the critical entry pressure(CEP) which is changed from CFM to SPBM, and CEP for dead-end system was around 100 kPa. The CEP increased from around 100 to 150 kPa for the crossflow system as the oil concentration increased from 0.01 to 0.03 vol% when Reynolds number was 7080.

• Journal of Embryo Transfer
• /
• v.12 no.3
• /
• pp.293-300
• /
• 1997

Supplementation of maturation medium with additional granulosa cells has beneficial effect on in vitro maturation of bovine follicular oocytes and their subsequent cleavage and development in vitro. However, maturation system using granulosa cells have some disadvantages that collection of granulosa cells is cumbersome and metabolic activity of the cells is variable according to ovarian cycle or follicular size. We hypothesized that bovine immsture oocytes matured without granulosa cell coculture can fertilize and develop normally if the medium volume per oocyte is reduced during in vitro maturation. Immature oocytes were matured for 24 hours in a TCM199 containing 10% fetal calf serum, anterior pitultary hormone (0.02 AU /ml Antrinⓡ) and estradiol with or without granulosa cells in vitro. In Group 1, 35 to 40 oocytes were matured in a well of 4-well plastic dish containing 500 $\mu$l of maturation medium and granulosa cells, and 9 to 10 oocytes were matured in a 50-$\mu$l drop of maturation medium without granulosa cells in Group 2. After maturation, oocytes were coincubated with sperm for 30 hours in a modified Tyrode's medium (IVF). Inseminated oocytes were cultured in a microdrop (30 $\mu$l) of a synthetic oviduct fluld medium (SOFM) containing BSA, Minimum Essential Medium essential and non-essential amino acids for 9 days. As a preliminary experiment, we investigated the beneficial effect of granulosa cells during maturation on subsequent cleavage and development using the same type of culturedishes (4-well dish). Granulosa cells could not increase embryo cleavage after fertilization but significantly improved (p<0.05) embryo development to expanding blastocyst (Table1 and 2). In Group 1, 68 and 80% of inseminated oocytes have cleaved at 30 hours and 2 days after IVF, respectively, which is similar (p>0.05) to the result of Group 2 (69% at 30 hours and 78% at 2 days after IVF). The oocytes in Group 2 showed 21 and 11% of developmental rates to expanding and hatching blastocysts, respectively, which was not significantly different (p>0.05) from those (20 and 10%, respectively) of oocytes in Group 1. In conclusion, it has been clarified that a microdrop culture system without granulosa cells for in vitro maturation can support bovine embryonic development to blastocyst in vitro as readily as a granulosa cell coculture system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.328-328
• /
• 2007

Large area matrix-addressed image detectors are a recent technology for x-ray imaging with medical diagnostic and other applications. The imaging properties of x-ray pixel detectors depend on the quantum efficiency of x-rays, the generated signal of each x-ray photon and the distribution of the generated signal between pixels. In a phosphor coated detector the light signal is generated by electrons captured in the phosphor screen. In our study we simulated the lateral spread distributions for phosphor coupled detector by Monte Carlo simulations. Most simulations of such detectors simplify the setup by only taking the conversion layer into account neglecting behind. The Monte Carlo code MCNPX has been used to simulate the complete interaction and subsequent charge transport of x-ray radiation. This has allowed the analysis of charge sharing between pixel elements as an important limited factor of digital x-ray imaging system. The parameters are determined by lateral distribution of x-ray photons and x-ray induced electrons. The primary purpose of this study was to develop a design tool for the evaluation of geometry factor in the phosphor coupled optical imaging detector. In order to evaluate the spatial resolution for different phosphor material, phosphor geometry we have developed a simulation code. The developed code calculates the energy absorption and spatial distribution based on both the signal from the scintillating layer and the signal from direct detection of x-ray in the detector. We show that internal scattering contributes to the so-called spatial resolution drop of the image detector. Results from the simulation of spatial distribution in a phosphor pixel detector are presented. The spatial resolution can be increased by optimizing pixel size and phosphor thickness.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.133-143
• /
• 2012

To evaluate the kinetic energy of the raindrops, the drop size distribution and the terminal velocity of the raindrops had been measured from January to September 2010 using the laser-optical disdrometer in KIGAM, Daejeon, Korea. The relationship between kinetic energy (KE) and rainfall intensity (I) was computed as logarithmic and exponential model, respectively, under the rainfall intensity of about 142mm/h. The exponential model is more suitable for the relationship of KE-I than the logarithmic model, because the exponential model presented better fit for KE over 50mm/h of rainfall intensity. Meanwhile, the differences of the total kinetic energy existed in rainfall events with almost same total rainfall depth, and KE values of Daejeon at high rainfall intensity underestimated rather than the others under temperate climate. Therefore, these differences of KE in rainfall events and geographical regions imply the result from the variations of rainfall intensity within a rainfall event.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.333-342
• /
• 2019

Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.22 no.4
• /
• pp.9-17
• /
• 2023

This study explores school location, school environment, educational conditions, and appropriate scale of schools in the context of Sejong City's development area and identifies effective school establishment plans based on the analysis of the needs of the educational community. The research questions for this study include, first, what is the change trend in the number of students as a result of the opening of schools in the development area of Sejong City to the present, and what differences are there between Sejong and other new cities? Second, what challenges arise in school location due to the occurrence of oversized schools and undergraduate institutions? Third, what challenges arise in school location that would limit the ability to create a safe school environment? Fourth, what aspects need to be improved in school location decisions to promote proper placement? A survey was conducted among parents and faculty members to collect data. The findings revealed that first, when establishing a school, identifying an appropriate location for the school was the top priority of the respondents. The second was the proximity of the school to dense housing, with a parent drop zone next to the school site. Third, to address the issue of lack of playgrounds and special class and care classes, respondents called for various measures such as securing school sites within a certain area. Finally, integrated operation schools and school facilities are required in preparation for decreasing school-age populations due to low birth rates.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.213-224
• /
• 2023

Type II solar radio bursts show frequency drifts from high to low over time. They have been known as a signature of coronal shock associated with Coronal Mass Ejections (CMEs) and/or flares, which cause an abrupt change in the space environment near the Earth (space weather). Therefore, early detection of type II bursts is important for forecasting of space weather. In this study, we develop a deep-learning (DL) model for the automatic detection of type II bursts. For this purpose, we adopted a 1-D Convolution Neutral Network (CNN) as it is well-suited for processing spatiotemporal information within the applied data set. We utilized a total of 286 radio burst spectrum images obtained by Hiraiso Radio Spectrograph (HiRAS) from 1991 and 2012, along with 231 spectrum images without the bursts from 2009 to 2015, to recognizes type II bursts. The burst types were labeled manually according to their spectra features in an answer table. Subsequently, we applied the 1-D CNN technique to the spectrum images using two filter windows with different size along time axis. To develop the DL model, we randomly selected 412 spectrum images (80%) for training and validation. The train history shows that both train and validation losses drop rapidly, while train and validation accuracies increased within approximately 100 epoches. For evaluation of the model's performance, we used 105 test images (20%) and employed a contingence table. It is found that false alarm ratio (FAR) and critical success index (CSI) were 0.14 and 0.83, respectively. Furthermore, we confirmed above result by adopting five-fold cross-validation method, in which we re-sampled five groups randomly. The estimated mean FAR and CSI of the five groups were 0.05 and 0.87, respectively. For experimental purposes, we applied our proposed model to 85 HiRAS type II radio bursts listed in the NGDC catalogue from 2009 to 2016 and 184 quiet (no bursts) spectrum images before and after the type II bursts. As a result, our model successfully detected 79 events (93%) of type II events. This results demonstrates, for the first time, that the 1-D CNN algorithm is useful for detecting type II bursts.

• The Journal of Engineering Geology
• /
• v.34 no.3
• /
• pp.403-413
• /
• 2024

This study aims to investigate the material properties of specimens made from pyrophyllite and pyrophyllite-aluminum mixed powders using high-speed, high-pressure dynamic compression technology. The aluminum powder exhibited a highly uniform particle size distribution ranging from 10 to 100 ㎛, whereas the pyrophyllite powder displayed four distinct particle size distributions: 0.1~1 ㎛, 1~10 ㎛, 80~100 ㎛, and 200~1,000 ㎛. Using high-speed, high-pressure dynamic compression technology with a drop time of approximately 0.34~0.4 seconds and a dynamic load of about 207 tonf, it was possible to fabricate pyrophyllite and pyrophyllite-aluminum mixed powder specimens with a volume of about 548 mm². The Shore hardness measurement results showed that specimen BG100 had an average of 43.7, BG90 had an average of 33.2, and BG85, BG80, BG75, and BG70 had an average of 31.0, indicating that the specimen with the least aluminum content exhibited the highest Shore hardness value. The thermogravimetric analysis revealed mass losses at two points: the first mass loss occurred at around 270℃ with a loss of approximately 1.45%, and the second mass loss occurred at around 600℃, where BG70 and BG80 showed a mass loss of about 2.53%, and BG75, BG85, and BG90 showed a mass loss of about 3.43%. Scanning electron microscopy analysis indicated that the microstructure of the specimens was similar regardless of the mixing ratio, with three elements-O, Si, and Al-being detected in all specimens. The mapping analysis of BG90 revealed an oxygen weight ratio of 50.80%, silicon weight ratio of 37.36%, and aluminum weight ratio of 11.85%. In the case of BG85, the results were 43.09% oxygen, 43.50% silicon, and 13.41% aluminum; for BG80, the results were 44.83% oxygen, 40.30% silicon, and 14.87% aluminum; for BG75, the results were 44.71% oxygen, 35.49% silicon, and 19.80% aluminum; and for BG70, the results were 34.95% oxygen, 35.73% silicon, and 29.32% aluminum.

• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.425-435
• /
• 1998

To improve the efficiency of nuclear transplantation in bovine, in this study the development in vitro of nuclear transferred (NT) embryos was compared by different activation regimens of the enucleated oocytes. The effect of developmental stage and culture system of donor nuclei on fusion and development in vitro of NT embryos were also evaluated. Oocytes were collected from Hanwoo ovaries obtained from slaughterhouse and matured in Ham's F-10 supplemented with hormones. After 20~22 h maturation, the oocytes were vortexed to be free from cumulus cells and subsequently their nucleus and the first polar body were removed. Enucleated oocytes were divided into 3 groups for activation; the oocytes of group I were activated with ionomycin for 5 min and subsequently incubated in 6-dimetylarninopurine (DMAP) for 4 h, Those of group II were treated with DMAP for 4 h at 39 h after onset of in vitro maturation (IVM) and those of group III were kept in room temperature ($25^{\circ}C$) for 3 h at 39 h after onset of IVM. After in vitro fertilization (IVF) the embryos for muclear donor were cultured either by group culture (20 embryos /50 ${mu}ell$ drop) or individually (1 embryo /50 ${mu}ell$ drop) for 4 day and 5 day. At day 4 and 5 after IVF, blastomeres were separated in calcium-magnesium free medium, and then classified into small (day 5: $\leq$ 38 ${\mu}{\textrm}{m}$, day 4: $\leq$ 46 ${\mu}{\textrm}{m}$) and large (day 5 : $\geq$ 38 ${\mu}{\textrm}{m}$, day 4 ; $\geq$ 46 ${\mu}{\textrm}{m}$). The separated blastomeres were replaced into enucleated and activated recipient cytoplasm. The blastomere-oocyte complexes were fused by electrically. The NT embryos were cultured in TCM-199 containing 10% FCS in 39$^{\circ}C$, 5% $CO_2$ incubator for 7 day. The results obtained were summarized as follows; There were no differences in fusion and development to blastocyst between groups as group I (68%, 10%), group II (75%, 14%) and group III (73%, 9%), respectively. However, the cell number in blastocyst of NT embryos in group III were significantly fewer than in the other groups (P＜0.05). No differences in fusion and development to blastocyst were found between individual or group cultured and between small or large blastomeres of day 4 and day 5 donor embryos. From these results, it was concluded that the combination of ionomycin and DMAP, or treatment of DMAP at 39 h after onset of IVM were useful for the efficient of production of NT bovine embryos, and the individual cultured embryos could be simply used as donor nuclei for NT bovine embryo.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).