• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.687-696
• /
• 2023

In recent construction sites, digital maps obtained through drone photogrammetry have garnered increasing attention as indispensable tools for effective construction site management. the strategic placement of Ground Control Points (GCPs) is crucial in drone photogrammetry. Nevertheless, the manual labor and time-intensive nature of GCP surveying pose significant challenges. The purpose of this study is to design the concept of automated GCPs survey technology for enhancing drone photogrammetry efficiency in construction sites. As a result, the productivity of the automated method was analyzed as 118,894.7㎡/hr. It is over 25% productivity improvement compared to traditional methods. In future studies, economic analysis of automated methods should be studied.

• 한국환경과학회지
• /
• 제30권2호
• /
• pp.173-184
• /
• 2021

Ecological disturbance plants distributed throughout the country are causing a lot of damage to us directly or indirectly in terms of ecology, economy and health. These plants are not easy to manage and remove because they have a strong fertility, and it is very difficult to express them quantitatively. In this study, drone hyperspectral sensor data and Field spectroradiometer were acquired around the experimental area. In order to secure the quality accuracy of the drone hyperspectral image, GPS survey was performed, and a location accuracy of about 17cm was secured. Spectroscopic libraries were constructed for 7 kinds of plants in the experimental area using a Field spectroradiometer, and drone hyperspectral sensors were acquired in August and October, respectively. Spectral data for each plant were calculated from the acquired hyperspectral data, and spectral angles of 0.08 to 0.36 were derived. In most cases, good values of less than 0.5 were obtained, and Ambrosia trifida and Lactuca scariola, which are common in the experimental area, were extracted. As a result, it was found that about 29.6% of Ambrosia trifida and 31.5% of Lactuca scariola spread in October than in August. In the future, it is expected that better results can be obtained for the detection of ecosystem distribution plants if standardized indicators are calculated by constructing a precise spectral angle standard library based on more data.

• 대한임베디드공학회논문지
• /
• 제18권2호
• /
• pp.75-80
• /
• 2023

Unmanned drone stations for automatic charging have been developed in order to overcome the flying time limitation of rotary wing drones. Since the drone stations is an unmanned operating system, each of the drones will be required to have a high degree of landing accuracy. Drone precision landing has been mainly studied depended on image processing technologies, but the image processing systems make several problems, such as the mission weight, the drone cost, and the development complexity increases, and the flight time decrease. Thus, this paper researched accuracy of precision landing based on RTK (real time kinetics) for rotary wing drones. For the experiments of RTK based precision landing, a drone repeatedly performed three missions. The survey accuracies of the RTK about missions respectively were set as 0.3, 0.2, and 0.1 meters. Each mission has one take-off point, two way-points and one landing-point, and was repeated ten times. The experiment results revealed landing error distance means of around 0.258, 0.12 and 0.057 meters on each of RTK setting.

• 한국지형학회지
• /
• 제28권4호
• /
• pp.41-52
• /
• 2021

With the popularization of drones and the ease of use of the Global Navigation Satellite System (GNSS), drone photogrammetry for terrain information has been widely used. Drone photogrammetry enables the realization of high-accuracy three-dimensional topography for the entire area with less effort and time compared to the past direct survey using GNSS or total station. From 3-D topographic data, various topographical analysis is possible. To improve the accuracy of drone photogrammetry, direct GCP surveying in the field is essential, and the numbers and reasonable positioning of GCPs are very important. In the case of beaches or tidal flats on the west coast of Korea, the numbers and location of GCPs are important factors in efficient drone photogrammetry because of the size of the area, difficulties of movement, and the risk from tides. If the RTK (Real-time kinematic) or PPK (Post-processed kinematic) method is used, the increased accuracy of the drone's location enables high-accuracy photogrammetry with a small number of GCPs. This study presents an efficient drone photogrammetry method in terms of time and economy by comparing and analyzing the results of drone photogrammetry using Non-PPK with low-cost PPK-Kit, based on the tests of various numbers and locations of GCPs in the university field including various slopes and structures like coastal terrain.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.91-99
• /
• 2018

암반사면을 안전하고 효과적으로 해석하기 위해서 암반의 역학적 특성을 면밀하게 조사해야 한다. 하지만 클리노미터를 사용한 절리조사의 한계점으로 인해 이를 보완한 새로운 측정법의 연구가 필요하다. 본 연구에서는 절리방향의 특성을 분석하기 위해 절리의 방향성을 현장에 적용할 수 있는 절리조사 측정장비를 개발하였다. 개발된 측정장비는 해석 소프트웨어와 하드웨어로 구분된다. 하드웨어는 암반 절리 방향성을 측정하는 측정모듈, 측정자료를 전송하는 전송모듈로 구성되었다. 소프트웨어는 측정모듈을 통해 얻은 데이터로부터 절리의 방향성을 분석하기 위해 개발하였으며 Drone Joint Orientation Survey Measurement로 명명하였다. 개발된 측정장비는 접근이 어려운 지역 등 조사자가 측정할 수 없는 경우에 현장적용성이 양호하며 절리의 방향성에 대한 실내시험결과를 효과적으로 분석할 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.553-560
• /
• 2020

드론 항공사진을 L∗a∗b 색공간으로 변환하고 항공사진에서 잘피가 나타난 영역을 분할 및 보정하여 드론 항공사진을 이용한 수심측량의 정확도를 향상시켰다. 드론을 이용한 수심측량은 음향측심기와 같은 보편적으로 통용되던 방식에 비해 저비용으로 빠른 시간에 수심자료를 얻을 수 있다. 그러나 수심측량 대상 해역에 잘피가 서식할 경우 해저면의 반사 특성이 일정하지 않아 드론을 이용한 수심측량시 오차가 발생한다. 우리나라에 서식하는 잘피를 비롯한 해조류는 수온이 낮아지기 시작하는 11월부터 자라기 시작하여 1~4월에 최대 밀도를 형성한다. 따라서 해당 시기의 드론 항공사진을 그대로 사용할 경우 수심측량의 정확도가 낮아지며, 이는 드론을 이용한 수심측량방식을 상용화하는데 극복해야 할 단점이다. 본 연구에서는 경북 월포해수욕장에서 드론으로 촬영한 고해상도 카메라 이미지를 분석하여 오차 발생해역을 구분하고 보정하는 알고리즘을 개발하였다. 또한, 보정한 드론 항공 사진으로 천해 수심 추정을 수행하여 알고리즘을 검증하였다. 잘피로 인한 오차 보정 알고리즘 적용 전 수심 5 m 이내의 200 m × 300 m 해역에서 발생하는 오차 표준편차의 1.5배를 넘는 오차 이상값 비율은 전체 이미지의 8.6%를 차지하였다. 오차 보정 알고리즘을 적용한 결과 오차 이상값의 92%가 제거되었으며, 평균제곱근오차(RMSE)는 33% 감소하였다.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.381-388
• /
• 2023

Small-scale environmental impact assessments have limitations in terms of survey duration and evaluation resources, which can hinder the assessment and analysis of the current situation. In this study, we propose the use of drone technology during the environmental impact assessment process to supplement these limitations in the current situation analysis. Drone photography can provide rapid and accurate high-resolution images, allowing for the collection of various information about the target area. This information can include different types of data such as terrain, vegetation, landscape, and real-time 3D spatial information, which can be collected and processed using GIS software to understand and analyze the environmental conditions. In this study, we confirmed that terrain and vegetation analysis and prediction of the target area using drone photography and GIS analysis software is possible, providing useful information for environmental impact assessments.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1233-1241
• /
• 2023

This paper investigates the efficient application of drone LiDAR technology for acquiring precise point cloud data in construction and civil engineering. A structured workflow encompassing data acquisition, processing, and accuracy verification is introduced. Practical testing on a construction site affirms that drone LiDAR surveying yields accurate and reliable data across various applications. With a focus on accuracy and verification, the results contribute to the progression of surveying methodologies in construction and civil engineering. The findings provide valuable insights into the dynamic technological landscape of these fields, establishing a foundation for more effective and precise surveying techniques. This study underscores the transformative potential of drone LiDAR technology in shaping the future of construction and civil engineering survey practices.

• 한국인터넷방송통신학회논문지
• /
• 제24권1호
• /
• pp.125-132
• /
• 2024

본 연구의 목적은 지역 특성에 맞는 드론 활용 모델 발굴 및 드론 활성화를 위한 수요조사 기반으로 드론 실증도시 구축 방향 제시 및 드론 활용 지원체계에 대한 활용방안을 제안하고자 하였다. 첫째, 설문자의 결과에 따르면, 드론 실증사업에 대한 이해도와 도입 필요성도 높고 특히 도시문제 해결에 많은 영향력을 주는 것으로 평가되었다. 둘쨰, 우선 순위와 장단기적 접근 분석 결과를 보면, 우선순위는 재난 관련 업무이고 중장기적 전략을 통한 접근이 필요한 것으로 평가되었다. 셋째, 사업 진행시 예산이 가장 중요한 이슈로 등장 햇다는 것이다. 실무자와 전문가들은 드론 기반 기술들이 예산과 기술이 준비 되었을때는 업무에 적극적으로 도입할 수 있다는 의사를 보유하고 있었다. 현재 적용이 제대로 이루어지지 않는 부분에 대해서는 예산 부족 문제가 가장 크게 지적되었으며, 이 부분이 해결되는 것이 필요하다고도 조사되었다. 넷째, 일부 영역에서 사업 발굴시 수요조사의 필요성이 조사되었다. 실증을 위한 수요조사는 반드시 필요하며, 공공에서 주도할 필요성이 조사되었다. 드론 기반 실증도시 구축에 있어서 대부분의 응답자가 수요조사가 필요하다고 답하였으며, 공공에서 주도하는 것도 필요하다고 조사되었다. 다섯째, 분야별 접근 방식에 대해서는 안전 재해관리 영역이 가장 적용이 필요한 부분으로 제시되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.133-134
• /
• 2019

As information and construction technology increases, the demand for sophisticated geometric design grows. Design of buildings is becoming more larger, higher, and complicated every day, requiring much new construction technology to bring the design into reality. Nonetheless, the speed of construction technology development is not as rapid. This study concerns the difficulties of realization of sophisticated geometric design. It aims to suggest using BIM and precision survey equipment during the construction stage of the project is a way to resolve. The study will list how to use BIM as an engineering platform incorporating a photo scanner, a scanner drone, and a 3D scanner in the construction stage of projects, how these progressive projects were able to benefit from the high-construction technology.