• International Journal of Internet, Broadcasting and Communication
• /
• 제10권2호
• /
• pp.13-18
• /
• 2018

Drones are controlled by the remote pilot from the ground stations using the radio control or autonomously following the pre-programmed flight plans. In this paper, we develop a method and an optimal path search system for providing 3D augmented reality flight (ARF) images for safe and efficient flight control of drones. The developed system consisted of the drone, the ground station and user terminals, and the optimal path search server. We use the Dijkstra algorithm to find the optimal path considering the drone information, flight information, environmental information, and flight mission. We generate a 3D augmented reality flight (ARF) image overlaid with the path information as well as the drone information and the flight information on the flight image received from the drone. The ARF image for adjusting the drone is generated by overlaying route information, drone information, flight information, and the like on the image captured by the drone.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.69-75
• /
• 2019

Remotely Piloted Aircraft (RPA) controls as a type of unmanned aerial vehicle (drone) is growing rapidly and its flight controller stick disposition is required standardization. We should standardize RPA drone flight control disposition because the flight pilot of RPA is hard to be trained so the flight controller stick differences impairs safety and wastes time and effort of flight controller industry. So this study researches the on-going standardization of RPA drone flight control disposition in Korea and foreign countries. Also this paper analyzes and researches of expert about RPA drone flight controller function and application of flight control mode. I accomplished expert research about standardization plan of unmanned flight control mode and confirm the necessity. Nowadays mode1 and 2 are mostly used in Korea so I carried out preference investigation for two modes. There were 4 preferences choices of RPA drone control mode necessity (importance) and recommendation of standardization modes. They answered that necessity of standardization is important considering pilot training, flight safety and positive development of drone industry. The result of standardization mode preference is that they prefer mode 2 (drone maker 86%, training facilities and research facilities 58%, government bureau 60%). Overall preference result shows that mode 1 24%, mode 1&2 16%, mode 2 60%. So they preferred mode 2 by 60%. The differences between two modes are the direction of throttle and pitch. Direction of throttle and pitch operate opposite way. They prefer mode 2 because mode 2 has similarities of manned flight control mode. Significance of this study is that it showed the necessity of standardization and flight control preference in a quantitative way. It will help drone standardization in related industries and development direction near future.

• 로봇학회논문지
• /
• 제16권3호
• /
• pp.245-249
• /
• 2021

In this paper, we present novel simulation contents for drone racing and autonomous flight of drone. With Depth camera and SLAM, we conducted mapping 3 dimensional environment through RTAB-map. The 3 dimensional map is represented by point cloud data. After that we recovered this data in Unreal Engine. This recovered raw data reflects real data that includes noise and outlier. Also we built drone racing contents like gate and obstacles for evaluating drone flight in Unreal Engine. Then we implemented both HITL and SITL by using AirSim which offers flight controller and ROS api. Finally we show autonomous flight of drone with ROS and AirSim. Drone can fly in real place and sensor property so drone experiences real flight even in the simulation world. Our simulation framework increases practicality than other common simulation that ignore real environment and sensor.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1538-1551
• /
• 2021

The current drone flight plan creation creates a flight path point of two-dimensional coordinates on the map and sets an arbitrary altitude value considering the altitude of the terrain and the possible flight altitude. If the created flight path is a simple terrain such as a mountain or field, or if the user is familiar with the terrain, setting the flight altitude will not be difficult. However, for drone flight in a city where buildings are dense, a safer and more precise flight path generation method is needed. In this study, using high-precision spatial information, we construct a drone safety flight map with a 3D grid map structure and propose a flight path search algorithm based on it. The safety of the flight path is checked through the virtual drone flight simulation extracted by searching for the flight path based on the 3D grid map created by setting weights on the properties of obstacles and terrain such as buildings.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.747-753
• /
• 2018

Currently, many companies have succeeded in logistics delivery experiments utilizing drone and report it. When a drone is used commercially, long-term flight is an important performance that a drone should have. However, unlike vehicles operated on the ground, drone is a vehicle that continues to consume energy when maintaining the current altitude or moving to the destination. Therefore, the drones can fly for a long time as the capacity of the battery is large, but the batteries with large capacity are restricted by heavy weight and it acts as a limiting factor in a commercial use. To address this issue, we attempt to compare how far we can fly than forward flight based on the flight pattern with the same energy consumption condition. In this paper, the comparison of energy consumption was performed in three flight pattern, forward flight without altitude change and forward flight with altitude change, by computer simulation and it shows the increasing of flight distances when the quadrotor fly with altitude change from high altitude to low altitude.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• 한국측량학회지
• /
• 제39권2호
• /
• pp.81-91
• /
• 2021

Drone related research has been increasing recently due to the development and distribution of commercial unmanned aerial vehicles. However, most of the previous studies focused on the accuracy and utility of drone surveying. For drones, the resolution of the result is determined according to the flight altitude, but since 70% of Korea is mountainous, it is necessary to analyze the quality of the drone image according to the flight plan. In this study, the quality of drone photogrammetry results according to flight plans was analyzed. The flight plan was established by fixed altitude and considering the height of the terrain. Images were acquired for both cases and data was processed to generate ortho images. As a result of evaluating the accuracy of the generated ortho image, the accuracy was found to be -0.07 ~ 0.09m. The accuracy of Case I and Case II did not show a significant difference, but for RMSE, Case I showed a good value. These results indicate that the drone flight plan affects the quality of the results. Also, when flying at a fixed altitude, II showed a lower value than the originally set overlap according to the altitude of the object. In future surveys using drones, flight planning taking into account the height of the object will contribute to the improvement of the quality of the results.

• 전자통신동향분석
• /
• 제33권4호
• /
• pp.70-80
• /
• 2018

Drones are now widely used in civilian applications such as filming, leisure, agricultural control, monitoring, and the generation of 3D-spatial information, deviating only from military drones. In the field of logistics, prototypes are emerging in the area of logistics transportation, and to develop a future transportation service under the name of a drone tax, each country is introducing its first flight results using its own unique drones. In this paper, we review the domestic and overseas trends of drone delivery service technology, which requires various capabilities such as automatic flight, and review the related core technologies. We then propose the flight capability and road map of a drone delivery service according to the detailed conditions such as the flight area, visibility, and flight method. Additionally, in connection with the postal processing of the Korea Post Office, which would be a main demand for this type of service, we describe a method for realizing a drone delivery service based on the structure, scenario, and deployment of the drone delivery system.

• 한국측량학회지
• /
• 제40권4호
• /
• pp.351-357
• /
• 2022

In this study, a direction for deregulation that can increase the use of drones in the field of spatial information is presented. Regulations and administrative procedures for drone operation showed similar procedures in Japan, the United States, and Korea, such as reporting flight equipment, driver's license, and prohibition of flying within a specific flight zone. In the United States, policies to encourage the use of commercial drones have been implemented, and Japan has slightly tightened regulations on drone operation to protect the Olympics and important national facilities. As a result of the study, in the area where drone operation is restricted for geospatial data construction, Korea was setting the largest area, and GIS analysis showed that Korea's drone flight restricted area was more than 19.4% of the country's land area. In order to increase the utilization of drones in the construction and utilization of spatial information in the future, it is necessary to reset the drone flight restriction zone and reduce the area of the drone flight restriction zone. In addition, it was found that Korea is the only country that has formal and specific regulations on geospatial information security management. In order to increase the construction of geospatial information using drones, it is necessary to ease GSD (Ground Sample Distance)regulations.

• 정보보호학회논문지
• /
• 제32권1호
• /
• pp.77-88
• /
• 2022

드론(Drone)의 제작기술이 발전하고 대중화되면서 주로 산업, 농업, 군사 등에 치우쳐 있던 드론 시장은 개인·상업 시장에서도 큰 성장세를 보인다. 그중에서 DJI는 개인·상업용 드론 시장에 높은 점유율을 보이고, 이에 따라 DJI 드론의 포렌식 분석이 주목받고 있다. 특히, 범죄행위에 사용된 드론을 탈취·획득하여 분석할 때, 드론의 비행경로 및 하드웨어 정보를 기록한 비행 로그를 해석하는 기술이 필요하고, 이는 DJI의 드론 모델마다 복호화 방식의 차이로 인해 드론 모델별로 다르게 적용할 수밖에 없다. 따라서, 디지털 포렌식 조사관의 관점에서 불상의 드론을 획득하였을 때, 분석할 수 있는 드론 모델에 대한 명확한 분류가 필요하다. 본 논문에서는 포렌식을 통해 DJI 드론의 아티팩트를 추출하여 분석하는 방법을 제안하고, DJI의 출시 연월이 다른 세 가지 드론 모델에 대해서 미디어 데이터의 분석 및 비행 로그 분석 결과와 복호화 방식에 대해서 분석한다. 마지막으로, 상용화된 DJI 드론 비행 로그의 복호화 여부에 따라 DJI 제품군의 드론을 분류한다.