• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.632-637
• /
• 2019

차량의 자율주행을 위한 최근의 연구는 매우 활성화되고 있고, 안전운행을 보조하고 운전자의 편의성을 향상시키기는 추세이다. 자율주행 차량은 인공지능의 결합, 영상인식 능력과 더불어 사물간의 인터넷 통신이 필수인 상황이다. 모바일 이통통신 네트워크는 처리하는데 한계가 있기 때문에, 쉽게 구현이 가능하고 확장이 용이한 Wi-Fi 네트워크를 활용하여 확장한다. 이러한 차량 관제용 네트워크를 구축하기 위한 무선 설계방식을 제안한다. 이동 단말장치의 데이터 송수신의 손실을 최소화하기 위한 AP의 배치 구성과 소프트웨어 구성방식을 제안한다. 제안한 네트워크 시스템의 설계를 통해서 이동 차량의 통신성능을 비약적으로 높일 수 있다. 또한 다양한 단말장치의 이동에 대한 실험을 통해, 차량용으로 사용할 수 있는 GPS, 영상, 음성 및 데이터 통신의 패킷 구성을 검증한다. 이러한 무선 설계기술을 2.4GHz, 5GHz 및 10GHz Wi-Fi 등의 다양한 범용 무선 네트워크에 확장적용이 가능하다. 또한 무선 지능형 도로망과 자율주행과의 연동이 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-139
• /
• 2003

In this paper, a design of VCM(Voice Coil Motor) for the measurement system of nano-level force and displacement was proposed and developed. This paper present the VCM shape for improvement of position resolution and guarantee of a large displacement. And then the finite element analysis method(FEM) utilized to produce linear driving thrust and satisfy required thrust of the system. The result shows the applicable possibility of the proposed VCM as a study for nano-level measurement system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.98-103
• /
• 2002

In this paper, static analysis of eddy current brake's frame, which is one of key structural components of brake system for high speed train, was performed in order to evaluate the design by computer simulation. Calculation was carried out in general for the driving modes 'braking' and 'frame in upper position(Brakes inactive)'. Several yield stress load cases and fatigue load cases were analysed for each of the driving modes. The fatigue load resulting from the Multi Body System simulation was also taken into consideration. The simulation results shows that some of structural part should be improved for more increasing reliability of frame.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.91-96
• /
• 1999

This study is about the design and analysis ot a suspension damper for truck driver's seat to improve the ride comfort. Trucks are usually subjected to hostile driving environments. Therefore, many truck driver's seat have suspension seats to isolate the vibration from the cab floor panel. Because the vehicle suspension system can reduce the primary vibration from the ground, only low frequency vibration can be transmitted to the driver's seat. But, this low frequency vibration can be harmful to the driver. The seat damper is very critical element to improve the ride comfort for the driver. In this study, a four-stage damper is designed and analyzed for the vibration capability. The damping coefficient of this damper can lie manually controlled in response to the road and driving environment.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6034-6039
• /
• 2012

본 논문에서는 모바일 로봇이 이동함에 있어 경사면을 만났을 경우 이를 극복하여 주행하는 경우가 발생할 수 있는데 이때 모바일 로봇 시스템 자체가 가지고 있는 슬립 문제가 주행을 진행함에 있어서 더욱 심하게 나타날 수 있기에 이를 해결하고 목표점까지의 안전한 직진 주행을 하기위한 모델 적응 퍼지 제어 방법을 기반으로 하는 모바일 로봇의 주행 제어 알고리즘을 제안하고자 한다. 제안하고자 하는 모델 기반 적응 퍼지 제어기의 경우 먼저, 모바일 로봇의 등반 조건을 확인한 후 경사면을 모바일 로봇이 극복 주행을 할 수 있는지를 판단하고 만약 가능하다면 모바일 로봇의 동역학 모델을 포함한 모델 기반 제어기를 설계하여 극복 주행 제어를 하고자 한다. 이러한 경우 모바일 로봇 시스템의 안정성 보장 및 지면 마찰력 그리고 외란 보상 등이 충분히 고려된 제어기 설계가 가능할 것이다. 또한, 설계하고자 하는 제어 기법 중 적응 퍼지 제어 방법의 경우 모바일 로봇의 동특성을 충분히 반영한 모델인 비선형 Non-holonomic 시스템과 모바일 로봇의 슬립 문제 해결 등에 충분히 유용할 것이고 이를 컴퓨터 시뮬레이션을 통해 검증하였다.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.1-6
• /
• 2011

This paper proposes a new design method for electric scooter which can maximize the power efficiency at the given driving condition. The proposed method is designed with the electric and mechanical parameters and driving dynamics. These values are extracted from the dynamic and mathematical equations of the scooter. For validation, numerical simulation results are presented in this paper. As a result, the scooter achieved over 80% efficiency at 360 rpm at 1.42kw load. It is clear that the proposed method was verified through a 1.42kw numerical model.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.395-398
• /
• 1996

A Global Positioning System(GPS) in an automobile can provide navigational information for identifying the current location of the automobile and helping the drive determine a desirable route to the destination. Usefulness of such a system depends on many design factors. This study examined two critical design factors from a human factors standpoint. The rotation methods and updating schemes of a map were manipulated in a simulated driving environment. Design guidelines are suggested based on the experimental results.

• 대한산업공학회지
• /
• 제40권3호
• /
• pp.267-274
• /
• 2014

The purpose of this study is to identify a relationship between the time taken and the characteristics of touch key for touch-screen-based in-vehicle information system (IVIS) and to suggest a new Fitts' law formula that is added a driving speed parameter. Many studies already have shown that Fitts' law is well fitted in various devices for primary tasks, but there is no study of Fitts' law for secondary task in dual-task situation. Fitts' law may not be applied to the secondary task as it is, because the secondary task performance can be affected by the amount of attention for the primary task. To verify this, we carried out an experiment that showed whether pointing task to touch-screen-based IVIS during driving is affected by driving speeds or not. In the experiment, 30 people were volunteered for participants and the participants carried out driving task and pointing task on the screen of IVIS simultaneously. We measured the time to point a touch key on IVIS for every condition (3 driving speeds${\times}5$ touch key sizes${\times}7$ distances between steering wheel and touch key). As a result, there was an effect of driving speed on the pointing time. As we extended the index of difficulty of the conventional Fitts' law formula by incorporating driving speed, we established an extended Fitts' law formula for pointing on IVIS, which showed better accordance with dual task situation. This study can be evidence that secondary task performance is affected by degree of concentration on primary task, and the extended Fitts' law formula can be useful to design interfaces of IVIS.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.20-25
• /
• 2022

This paper represents an adaptive Region of Interest (ROI) decision for real-time performance in an autonomous driving perception module. Since the whole automated driving system consists of numerous modules and subdivisions of module occur, it is necessary to consider the characteristics, complexity, and limitations of each module. Furthermore, Light Detection And Ranging (Lidar) sensors require a considerable amount of time. In view of these limitations, division of submodule is inevitable to represent high real-time performance for stable system. This paper proposes ROI to reduce the number of data respect to computation time. ROI is set by a road's design speed and the corresponding ROI is applied differently to each vehicle considering its speed. The simulation model is constructed by ROS, and overall data analysis is conducted by Matlab. The algorithm is validated using real-time driving data in urban environment, and the result shows that ROI provides low computational costs.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.275-279
• /
• 2012

The linear actuator has the inherent drawback of air gap variation because its linear motion is usually guided by the springs, which destabilizes the dynamic performance. In order to design the linear actuator to be insensitive to air gap, this paper describes the robust design of the air compressor driving linear actuator using Taguchi method. The orthogonal arrays are constructed with selected control factors and noise factor for minimum experiment. The control factors are thickness of inner magnet, height of upper yoke, thickness of outer magnet and thickness of lower yoke while noise factor is airgap. The finite element analysis using commercial electromagnetic analysis program "MAXWELL" are performed instead of experiment. ANOVA are performed to investigate the effects of design factors. In result, the optimal robust linear actuator which is insensitive to air gap variation is designed.