• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1380-1386
• /
• 2012

It is important to consider supply voltage stability in case of design and construction of a substation at electric railway because a urban transit is operated by electricity and it is driven simultaneous in the same section. This paper study on variation of the dynamic characteristic of supply voltage according to the track environment and spatial distribution as driving of urban transits. Simulation tool, TOM(Train Operations Model) software is used to ensure stability of feeder system being used around the world. As results of simulation, voltage of the contact wire is in limits on driving operation diagram of urban transits. Also, it has confirmed that there is a correlation the phase current, depending on the speed of urban transit and track environment like vertical gradients and curve radius.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.612-618
• /
• 2009

Recently the roles of railways about the prevention of global warming caused by greenhouse gases and for low carbon green growth are larger than ever. And the railroad-related research institutions have been active in researching for energy conservation. Especially the urban railroad has been emerged as the best means of transportation compared to the general public transportation systems in punctuality, stability, ecology and etc. In operating the urban railroad system there are various ways for energy savings. In the larger category, One is the hardware aspect according to the structure of the vehicle and the development of control systems. The other is the software aspect which efficient train operation can be made through control of driving patterns and driving diagram. In this paper, there is sense to analyze the result in verifying expectation relation with variable and the use of electric power on this after selecting main variables that can influence to the energy of the train operation in the software aspect. First, after collecting the basic data related to operation(train speed, operating hours, power consumption, the position of stopping station, electrical power system etc.) and according to this, investigating the consumption of the energy of the operation, in the side of energy consumption deducing and analyzing problem, this will be found solutions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.94-100
• /
• 2011

TCMS is the most important controller in the subway train for reliable train control and service oriented flexibility. TCMS software charges communications and control of train and maintains control devices so we use QNX for real-time control. This paper introduces overall software development of TCMS using various diagrams. Software implementation details in TC and CC are explained using deployment diagram through train configuration. Driving control process among many processes is focused to present implement details which controls train by driver or automatic train operation and handles commands to control deriving devices in cars. Reliable operation of train and easy maintenance process is achieved through the same hardware in train control computer and car control computer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.451-456
• /
• 2004

This study was performed to analyze the operation system of transfer crone to improve the reality of yard operation roles in container terminal and present the applicable method of operation rules to apply the operation priority. And we derived the procedure to estimate the maximum number of waiting truck based on the waiting of truck and the occupancy of driving lane in yard, and analyzed the constraint state of space. To solve the space constraint, we provided a multi-job principle to define the space resource and described the solution and sequence diagram for the principle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.39-40
• /
• 2006

The operation of wheel-loader is mainly divided into steering and excavating. The existing wheel-loader is used by handle for steering operation and by joystic for excavating operation. When we do steering and excavating operation simultaneously, we feel so uncomfortable because we have to use handle and joystic simultaneously. Therefore, we need to develop eletro-joystic steering system instead of hydraulic-handle steering system. So we can improve driving convenience in industrial field. This paper analyze spool of steering wheel and joystic and drive open area diagram. As a result, we can know characteristics of each valve before developing new electro-joystic steering system for wheel-loader.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.153-160
• /
• 2008

Personal noise exposure was assessed in railroad operators working in 40 operation units including the Gyeongbu line, Honam line, and Janghang line between 2004 and 2006. 8-hour TWA were assessed based on the MOL (Ministry of Labor) guideline on noise evaluation, and 17% of these measurements exceeded 85 dBA while 70% were over 80 dBA. When the ACGIH TLV is adopted, 40% of measurements were over TLV (85 dBA). The noise exposure risk of railroad operators was higher for diesel locomotive operation and longer operational distances; in addition, the risk was higher for passenger car operation compared to freight car driving. Given that in Korea, over the past 30 years diesel locomotives have provided most of the railway's motive power and that hearing protective equipment is not likely to be used by workers during operation, railroad operators are at a high risk of noise-induced hearing loss. The result of audiometric test among 568 railroad operators showed that 32.6% of those tested had a hearing threshold shift of more than 40 dB. In conclusion, this study calls for more fundamental measures including noise control countermeasures within the operation areas, development of equipment that generates less noise and adopting limitation on the operation distance for a work shift.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.721-726
• /
• 2004

This study was performed to analyze the operation system of transfer crane to improve the reality of yard operation rules in container terminal and present the applicable method of operation rules to apply the operation priority. And we derived the procedure to estimate the maximum number of waiting truck based on the waiting of truck and the occupancy of driving lane in yard, and analyzed the constraint state of space. To solve the space constraint, we provided a multi-job principle to define the space resource and described the solution and sequence diagram for the principle.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.3
• /
• pp.94-106
• /
• 1986

Since the oil shock of '70s the engine makers have developed new types of diesel engine with low fuel consumption. There is an obvious tendency towards the use of poorer quality fuels, such as the residual oil from chemical processes of refinery. The shaft driving generators is also widely adopted on behalf of the auxiliary diesel engines, which are driving on the expensive diesel oil and have high fuel oil consumption rates, and some mania propulsion diesel engines are equipped with reduction gear systems to get better propulsive efficiency by slower propeller revolutions. The propulsion shafting system equipped with the shaft driving generator or the geared diesel engine shafting system has flexible couplings, and it requires extensive investigations of the torsional vibration and torque fluctuation in order to ensure the acceptable operation range in service. The characteristics of misfiring must be especially examined for the high viscosity fuels to be used. Both torsional vibration and fluctuating torque resulted from misfiring, should be examined for thier effects on the flexible coupling and propulsion shafting system. This paper is to investigate and solve the above mentioned problems which must be predicted on the design-stage of marine propulsion shafting system. A computer program is developed to calculate the indicated diagram, fluctating torque and torsional vibration for both normal and misfiring conditions.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.72-79
• /
• 2014

The purpose of this study is to draw the improvement plan through the analysis of problems of main stretchers that are being used by the 119 EMS. In order to find out the problems, we used the literature review and analysis, survey questionnaire and we also made full use of KJ method (Kawakita Jiro method, affinity diagram), graph method, and priority matrix method to produce the improvement indicators. The problems of main stretchers are summarized as follows. they are being recognized as part of the emergency vehicle, they have the imperfection of performance verification criteria, and they cause the injuries of paramedics and patients accidents in operation. The indicators such as the ease of operation, the high performance, the multi-function, the driving performance, the durability and the lightweight, was produced to improve the problems. The results of the interconnection analysis and the applying priority matrix method on the indicators are the ease of operation ${\rightarrow}$ the multi-function ${\rightarrow}$ the driving performance ${\rightarrow}$ the high performance ${\rightarrow}$ the durability and the lightweight in order of importance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.523-530
• /
• 2006

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element hearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as veil as the rotor itself. Each resultant hearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.