• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.11-19
• /
• 2004

When pile foundation constructed by driving method, it is desirable to perform monitoring and estimation of pile drivability and bearing capacity using some suitable tools. Dynamic Pile Monitoring yields information regarding the hammer, driving system, and pile and soil behaviour that can be used to confirm the assumptions of wave equation analysis. Dynamic Pile Monitoring is performed with the Pile Driving Analyser. The Pile Driving Analyser (PDA) uses wave propagation theory to compute numerous variables that fully describe the condition of the hammer-pile-soil system in real time, following each hammer impact. This approach allows immediate field verification of hammer performance, driving efficiency, and an estimate of pile capacity. The PDA has been used widely as a most effective control method of pile installations. A set of PDA test was performed at the site of Donghea-1 Gas Platform Jacket which is located east of Ulsan. The drilling core sediments of location of jacket subsoil are composed of mud and sand, silt. In this case study, the results of PDA test which was applied to measurement and estimation of large diameter open ended steel pipe pile driven by underwater hydraulic hammer, MHU-800S, at the marine sediments were summarized.

• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.635-642
• /
• 2004

본 논문에서는 최대 견인력 제어를 위해서 부하토크외란관측기와 속도센서리스 백터제어를 이용하여 점착력 계수를 추정하고 추정한 점착력 계수의 미분치를 PI 토크 제어하는 Anti-slip제어를 제안한다. 점착력 계수를 추정하기 위해서는 전압, 전류값 뿐만 아니라 자속이나 속도정보가 필요하다. 따라서 전동기의 회전속도를 정확하게 검출 할 수 있는 속도센서가 필요하게 된다. 그러나 속도검출을 위해 속도센서를 부착하는 것은 여러 가지 면에서 단점을 가지고 있다. 이러한 문제점을 해결하기 위하여 속도센서 없는 센서리스 구동방식에 의한 부하토크외란관측기를 설계하여, 점착력 계수를 추정한다. 이와같은 제어 알고리즘을 구현하기 위하여 1C1M 철도모의장치를 이용하여 제안된 알고리즘을 실험을 통하여 확인하였다.

• 연구논문집
• /
• 통권22호
• /
• pp.27-38
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent control system to he wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steering, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR(JnfraRed) modem. Especially it is possible to easily network to use not an exclusive controller of AGV but personal computer(PC) when communicate and interface a different kind of controller.

• International Journal of Automotive Technology
• /
• 제1권2호
• /
• pp.61-69
• /
• 2000

This paper will address the basic requirements for realizing a stop and go cruise control system. Issues discussed comprise: functional, sensor and basic HMI requirements, primary characterization of naturalistic stop & go driving, and the basic approach of the transformation of situational knowledge in an elementary controller.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.240-249
• /
• 2013

This paper discusses the maneuvering control algorithm based on all-wheel independent driving and steering control techniques for special purpose 6WD/WS vehicles. The maneuvering control algorithms considering superior dynamic characteristics of high power in-wheel motors and independent steering system are designed to perform driving, steering, vehicle stability, and fault tolerant control. The maneuvering controller applies sliding and optimal control theories considering optimal torque distribution and friction circle related to the vertical tire force. The fault tolerant control algorithm is applied to obtain the similar maneuverability to that of the non-faulty vehicle. The simulations using the Matlab/Simulink dynamics model and experiments using HIL simulator mounting the real controllers with the designed control algorithms prove the improved performances in terms of vehicle stability and maneuverability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.758-768
• /
• 2005

The ball screw actuated by the electric motor is widely used as an essential actuator for driving the mechanical system by virtue of accuracy and force transmission capability. In this paper, a design of the global sliding mode control is presented to drive the ball screw actuator along the minimum time trajectory, In the proposed control scheme, if the ranges of parametric uncertainties and torque limits of the system are specified, the arrival time of the load along the minimum time trajectory can be estimated. Also, the arriving time at the reference input and the maximum acceleration are expressed in a closed form solution. Conversely, the capacity of a ball screw actuator including the motor can be easily designed if the external load and its transportation time are specified. The superior performance of the proposed control scheme and analysis is validated by the computer simulation and experiments comparing with other sliding mode controllers.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.190-196
• /
• 2001

The naval vessel must moves rolling, pitching, yawing by wave when it runs in ocean. Some narrow beam antenna needed position compensation by stabilizer or gimbal for best performance. This paper presents the precision position control for heavy weight(130kg) in roll and pitch direction. Generally it's called for gimbal. This gimbal uses P-I controller, and it's driven by linear actuator and servo motor. This gimbal gets ship's gyro signal and synchro, which have the absolute angle value. Some other similar equipments are driven by huge hydraulic power, but this gimbal is driven by small servo motor. This control loop gets the following procedure repeatedly; reading ship gyro and gimbal synchro, calculating compensated error and control output, driving motor and actuator The performance of gimbal system was satisfied.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.229-237
• /
• 1996

For the practical use of a fuel injection system using solenoid, some mechanical and electrical problems should be explicitly analyzed. In our study, we have investigated these problems experimentally and have improved such that a solenoid driving circuit is liable to establish a fast reponse and a precise control of injection quantity. This proposed fuel injecton system is capable to control equivalence ratio from low level to high level. Therefore, we expect that this proposed system should be applicable to an actual engine.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.974-979
• /
• 1990

The system discussed in this paper is an integrated stand-alone system with the full functional capabilities required of a telerobot system. It is complete with a force-reflecting 6-DOF hand controller, driving a PUMA 560 or 762 robot, with an integrated force-torque sensing wrist sensor and servo-driven parallel jaw gripper. A mix of custom and standard electronics, distributed computers and microprocessors, with embedded and downloadable software, have been integrated into the system, giving rise to a powerful and flexible teleautonomous control system.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.150-158
• /
• 1999

본 논문은 선박 장착을 위한 안정된 플랫폼형의 동적방식 광파이버 자이로콤파스의 구동시스템 안정화에 대한 연구이다. 구동모터로 선정된 스텝핑모터는 FOG 콤파스 특성에 따른 연구 목적상 정속 및 저진동의 안정한 운전을 필요로 한다. 이러한 측면에서 기발표된 주파수변조방식의 안정화 구동시스템의 설계상 나타났던 문제점을 보완할 수 있는 퍼지제어를 사용한 새로운 방식의 제어기를 제안한다. 시뮬레이션을 통하여 제안된 방식의 우수성을 보였으며, 특히 시스템의 크기, 무게 그리고 운전환경의 다양성 측면에서 자이로콤파스로서의 적용 가능성이 크다.