• Journal of Ecology and Environment
• /
• v.36 no.3
• /
• pp.173-181
• /
• 2013

Two varieties of Aucuba japonica differ in ways that can be considered adaptive to differing geo-climatic conditions in their respective distribution ranges. Irrespective of growth stage, the mean leaf size of A. japonica var. japonica was significantly larger than A. japonica var. borealis. Smaller leaf size and ultimately smaller stature of A. japonica var. borealis are an advantage under the higher snow load and lower temperatures in the forests along the East Sea where the variety grows. Snow load also acted as an important driving force for structural modifications of A. japonica var. borealis from cellular level in leaves to the organization of branch extension growth. Global warming by changing snowfall patterns in Japan may lead to range shifts in the two varieties of A. japonica.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.187-190
• /
• 2004

Transducer for ultrasonic linear motor with the symmetric and anti-symmetric modes was studied. The ultrasonic liner motor consists of two Lngevin type piezoelectric vibrators that cross at right angles with each other in tip. In order to excite symmetric and anti-symmetric mode, the transducer must have a 90 degree phase difference of voltage. Therefore, the tip of transducer moves on an elliptical motion. In this paper, the finite element analysis was used. The ultrasonic motor was fabricated using the simulated result and the driving characteristics were measured.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.843-848
• /
• 2000

In general, inchworm actuators are composed of two clamping piezoelectric elements and one expansion piezoelectric element. In this paper, two electromagnetic clampers are used for higher speed and high load. Dynamic equation is derived to simulate the behavior of the inchworm actuator with electromagnets. Electromagnetic clamper is used to improve the performance of the inchworm actuator. The electromagnetic clamper is composed of two permanent magnets and one traditional electromagnet. The permanent magnets play the role of the source of magnetic field to make clamping force higher, and the electromagnet is to change the mode between clamping and free. The driving voltage profile is also analyzed to improve the speed of inchworm actuator. The real system was manufactured and experimented to find dynamic characteristics and the maximum speed is obtained. Dynamic model is verified by comparing with experimental results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.66-72
• /
• 2012

Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper gives a description of an experimental study of the ultrasonic welding of metals. A horn suitable for 40,000Hz was attached to the ultrasonic metal welder in order to weld Cu sheet. The Cu sheet welding was done with different amplitude, pressure and welding time, and its maximum tension was measured. Maximum tension of 177.99N was obtained when the pressure was 2.5bar, amplitude was 80%, and welding time was 0.34sec. Therefore, excessive welding condition negatively influences maximum tension measurement result.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.993-997
• /
• 1998

This paper presents a two-switch boost chopper with a sinewave current shaping and power factor correction scheme, which is applied for driving electronic ballast using high frequency resonant inverter. A working principle of the proposed one-converter type electronic ballast with power factor correction and active filtering schemes is described on the bases of the equivalent circuit of each operation mode, together with operation analysis. The steady-state performance evaluations of this electronic ballast are illustrated and discussed in experiment.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.502-505
• /
• 2002

A singl-phase power factor corrected converter for switched reluctance motor driving is presented to achieve sinusoidal, near unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver Into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet is designed to evaluate the proposed topology The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.938-943
• /
• 1998

The induction motor of the electric vehicles is controlled based on the vector control method to obtain good torque control characteristics. In the conventional vector control system, the field exciting current should be kept on a constant value to keep a stable flux level. This method has a liability that core loss becomes increasing at the light load region. To solve this liability, the efficiency maximizing control method of the vector controlled induction motor is proposed in thid paper. We developed light weight water cooled 60kW induction motor drive system which adopts our method and fabricated a conversion electric car for actual vehicle test. We demonstrate the usefulness of drive system by comparing its driving mode with conventional field oriented system and an efficiency maximizing controlled induction motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.288-294
• /
• 2001

In this study, a new PWM method considering the actuation delay of high speed solenoid valves is proposed to improve the response characteristics of electro hydraulic servo systems controlled by high speed solenoid valves. In addition, the decision method for the system gain, the basic period of PWM, and the sampling time is proposed, Since the conventional system controlled by high speed solenoid valves is too slow to apply this method, a high speed driving circuit(Quick-Drive) which enables rapid switching of the high speed solenoid valve at a high speed sampling mode is applied to realize this method. The experimental result shows that it is possible to achieve precision and quiet control without occurrence of limit cycle and wide range dead band.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.77-82
• /
• 1999

대형 화물트럭의 차실 내에 높은 수준의 차바닥 진동을 수반한 높은 소음이 발생하였다. 측정 및 분석결과 문제의 진동 소음은 추진축의 회전 1차 및 2차 성분으로 나타났다. 진동 전달경로상의 구성계 및 구성요소들에 대해 모드해석과 실차 주행 모드 해석시험을 실시한 결과 드라이브라인 및 프레임의 공진주파수가 문제가 되는 소음진동 주파수와 거의 일치하였으며, 또한 캡의 실내음향 공진 모드가 문제되는 주파수에서 존재하였다. 실험결과에 따라 액슬과 액슬간의 축의 장착각도를 변경하여 가진력을 줄이고, 비틀림 동흡진기를 추진축에 장착하여 드라이브라인계 공진을 제어함으로써 문제의 시내진동소음을 현저히 개선하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.489-494
• /
• 2000

In the high speed driving conditions, the vibrational phenomena with relation to chassis system are becoming more important factors in chassis design and development. In this paper Commercial Dynamic program is used to model middle size bus for brake judder phenomenon. To verify the effects of a body structure in brake judder, body structure is modeled in flexible. Also mode shapes and frequencies are obtained from Commercial FEA program in the same condition of experimental test. The simulation results are compared to the experimental results and summarized