• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.39-50
• /
• 2007

This study investigated how drivers' cognitive characteristics, such as perception-motor skills and safety-seeking motivation; personal characteristics, such as sensation-seeking disposition coping with physical and social dangers; their self-perceived driving ability; and their normal driving behaviors influence the number of driving violations. 352 drivers participated in the study. MANOVA was performed in order to test the differences in their driving behaviors according to their level of sensation-seeking disposition and driving ability, and Structural Equation Modeling was used to examine the causal relationships among their demographic characteristics, sensation-seeking dispositions, driving ability, driving behaviors and the number of violations. The results indicated that drivers who had higher perception-motor skills seemed to be careful with pedestrians. From the results, drivers who had somewhat higher safety-seeking motivation tended to violate fewer traffic regulations intentionally or accidentally and showed more positive driving behaviors. Furthermore, drivers who had higher perception-motor skills, higher sensation-seeking disposition, and lower safety-seeking motivation had a tendency to violate intentionally more traffic regulations. The older drivers showed driving behaviors that were careful of pedestrians. The drivers who had higher sensation-seeking disposition and longer driving careers violated more traffic regulations, both intentionally and accidentally. Results from LISREL indicated that the predictive variables directly or indirectly influenced on drivers' violation numbers ($x^2$=341.62(p=.00), GFI=.94. RMR=.10).

• Korean Journal of Culture and Social Issue
• /
• v.8 no.1
• /
• pp.61-77
• /
• 2002

This study focuses on drivers' risk perception & construct in risk scene. The measures used were the scores of hazard perception, namely the subjects' evaluation of the degree of risk through the 'Q-sorting' with 30 drivers. The subjects were divided into 3 groups according to their evaluating score, Z-score, road users' hazard(type 1), environmental hazard(type 2), situational hazard(type 3). And ten constructs derived from Q-sorting were compared through 'consensus item analysis'. It suggest that there are different in constructs for risk perception. Then those results are discussed in terms of theoretical and practical implication of traffic safety including accidents analysis and drivers' education.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.107-119
• /
• 2017

PURPOSES : The desire of drivers to increase their driving speeds is increasing in response to the technological advancements in vehicles and roads. Therefore, studies are being conducted to increase the maximum design speed in Korea to 140 km/h. The stopping sight distance (SSD) is an important criterion for acquiring sustained road safety in road design. Moreover, although the perception-reaction time (PRT) is a critical variable in the calculation of the SSD, there are not many current studies on PRT. Prior to increasing the design speed, it is necessary to confirm whether the domestic PRT standard (2.5 s) is applicable to high-speed driving. Thus, in this study, we have investigated the influence of high-speed driving on PRT. METHODS : A driving simulator was used to record the PRT of drivers. A virtual driving map was composed using UC-Win/Road software. Experiments were carried out at speeds of 100, 120, and 140 km/h while assuming the following three driving scenarios according to driver expectation: Expected, Unexpected, and Surprised. Lastly, we analyzed the gaze position of the driver as they drove in the simulated environment using Smarteye. RESULTS : Driving simulator experimental results showed that the PRT of drivers decreased as driving speed increased from 100 km/h to 140 km/h. Furthermore, the gaze position analysis results demonstrated that the decrease in PRT of drivers as the driving speed increased was directly related to their level of concentration. CONCLUSIONS : In the experimental results, 85% of drivers responded within 2.0 s at a driving speed of 140 km/h. Thus, the results obtained here verify that the current domestic standard of 2.5 s can be applied in the highways designated to have 140 km/h maximum speed.

• International Journal of Advanced Culture Technology
• /
• v.9 no.2
• /
• pp.18-31
• /
• 2021

The purpose of the present study was to present evidence for driving interventions for the elderly by conducting programs that can improve visual perception and cognitive function in a driving simulator for elderly drivers and analyse their effects. Three elderly subjects who were 65 years or older, did not have physical and cognitive impairments, and were able to drive themselves participated in the present study. A total of 12 intervention sessions, of which subjects participated in 10 sessions of nine different visual perception and cognitive function programs available in a driving simulator, were conducted and pre- and post-program assessments were conducted (two assessments in total). The assessments included the evaluation of visual perception, frontal lobe function, concentration, safe driving behaviour, and self-efficacy. The results showed positive effects of the driving simulator program on the visual perception, frontal lobe function, concentration, safe driving behaviour, and self-efficacy of all subjects. Changes in the simulator results showed remarkable improvement in the response evaluation, judgment evaluation, and predictive power evaluation, but showed difficulties in interference tasks and depth perception in common. The results showed positive effects of driving simulator training on the driving ability of the elderly, and consistent provision of such training is expected to improve the quality of life of the elderly by securing the safety of driving and actively supporting social participation.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.91-106
• /
• 2017

PURPOSES : Because elderly drivers are more prone to becoming confused when approaching an urban intersection and thus may yield prolong judgment and decision times than non-elderly drivers, to increase the comfort and safety of the intersection environment for elderly drivers, this study applied autonomous driving tests at an urban intersection to examine their driving characteristics. METHODS : To obtain a more comprehensive understanding of driving features, this study collected drive data of non-elderly drivers and elderly drivers via an autonomous experiment using OBD2 and an eye-tracker, in addition to performing a literature review on the measured visibility range of elderly drivers at intersections. This literature review was conducted considering the general knowledge of elderly drivers having relatively reduced visibility. Additionally, as they are commonly more vulnerable, this study analyzes characteristics of elderly drivers as compared to those of non-elderly drivers. CONCLUSIONS : The results of this study can be summarized as follows: 1) the peripheral visible distance of elderly drivers is reduced as compared to that of non-elderly drivers; 2) elderly drivers approach and proceed through intersections at slower speeds than non-elderly drivers; and 3) elderly drivers yield increased driving distances when performing a right or left turn as compared to non-elderly drivers as a result of their reduced speed and acceleration and larger turning radii relative to non-elderly drivers.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.144-144
• /
• 1999

Phantom phenomena on the signal light was observed and change of perception-reaction time of the observer was measured. If phantom phenomena occurs, signal light perception- reaction time by the drivers is prolonged, the extent of which may disturb driving. Length of the perception-reaction time is affected by the luminance contrast between the turned-on and tuned-off signals. Based on the measured results, several methods to prevent phantom phenomena were suggested.

• Journal of Distribution Science
• /
• v.20 no.3
• /
• pp.23-31
• /
• 2022

Purpose: The purpose of this study is to analyze the Safety and Logistical Distribution Management system in Thailand's Highway Work Zone based on data from Logistics drivers. Accidents in highway construction zones have caused enormous casualties in Thailand yearly. Statistical data shows evidence of correlation between numbers of accidents and drivers' recklessness. Research design, data, and methodology: In this study, we conducted an in- depth interview with 414 logistics drivers and highway construction workers in Khon Kaen province, Thailand. The data was collected based on 63 questionnaires aiming at capturing factors contributing to the risk of safety and cause of accidents in logistic infrastructures such as Highway work zone. Results: The result reveals two significant factors affecting safety in highway work zone, which includes construction environment and safety management system. Moreover, the result shows that feeling of afraid and confused while driving within the construction zones significantly affecting driver's risk of having an accident. Conclusions: The findings of this study offer that a strategic planning and evaluation of the logistics drivers' satisfaction and construction workers' participation to mitigate highway accidents at construction zones and that drivers' knowledge and perception toward construction safety management plays a significant role in preventing highway accidents at the construction areas.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.127-134
• /
• 2013

PURPOSES: Speeding is often the primary contributor to fatal crashes. Surprisingly, driving behaviors are indirectly affected by personal factors such as law-abidance, risk sensitivity, and situational adaptability. This research aims to verify the effectiveness of pavement markings at reducing the speeds of high-risk drivers. The purpose of this study is to establish how drivers (including law-abiding or law-breaking, high-risk or low-risk) react to different pavement markings in a driving simulator. METHODS: The five different pavement markings were selected from markings used in other nations. The forty-two drivers were then surveyed, via questionnaires, and placed into the corresponding groups. Finally, statistical analysis was conducted to determine the extent of speed reduction for each pavement marking. RESULTS: Higher speeds were linked to the high-risk drivers. Furthermore, after analysis of the mean difference of average speeds by pavement marking, it was determined that Dragon's Teeth had the greatest speed reducing effect on these drivers. CONCLUSIONS: Perceptual countermeasures are unlikely to strongly affect high-risk drivers' perception of speed on the curves. This statistically demonstrates that Dragon's Teeth have a subtle effect on reducing speeds in the driving simulator. This study's significance lies in the improved understanding of high-risk drivers in terms of road facilities. It approaches the effects of various patterns of pavement markings for high-risk drivers.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.59-72
• /
• 2018

PURPOSES : This study was conducted to develop expressway safety treatments based on the analysis results of older driver behaviors through literature review, surveys, and driving simulator experiments. METHODS : In this study, three analyses were conducted: surveys of 700 older drivers to find the risk segments they recognized, driving simulator experiments with older and younger drivers to investigate driver behaviors, and expert surveys to find the priority of expressway safety treatments for older drivers. RESULTS : Through survey results it was found that merging areas and tunnels were identified as the most dangerous areas, and more dangerous older driver behaviors were observed on those expressway segments in the driving simulator experiments. In addition, the priorities of safety treatments for each segment of expressways were decided based on expert surveys. CONCLUSIONS : It was concluded that choice and concentration strategies of expressway safety treatments for older drivers should be applied as perceptions regarding dangerous spots and older driver behaviors, including geometric designs, safety facilities, regulation, and institutes to improve expressway safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.