• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.985-992
• /
• 2005

Vehicle Stability Control (VSC) system prevents vehicle from spinning or drifting out mainly by braking intervention. Although a control threshold of conventional VSC is designed by vehicle characteristics and centered on average drivers, it can be a redundancy to expert drivers in critical driving conditions. In this study, a manual adaptation of VSC is investigated by changing the control threshold. A control threshold can be determined by phase plane analysis of side slip angle and angular velocity which is established with various vehicle speeds and steering angles. Since vehicle side slip angle is impossible to be obtained by commercially available sensors, a side slip angle is designed and evaluated with test results. By using the estimated value, phase plane analysis is applied to determine control threshold. To evaluate an effect of control threshold, we applied a 23-DOF vehicle nonlinear model with a vehicle planar motion model based sliding controller. Controller gains are tuned as the control threshold changed. A VSC with various control thresholds makes VSC more flexible with respect to individual driver characteristics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.423-429
• /
• 2013

A 6-Gb/s differential voltage mode driver is presented whose output impedance and pre-emphasis level can be controlled independently. The voltage mode driver consists of five binary-weighted slices each of which has four sub-drivers. The output impedance is controlled by the number of enabled slices while the pre-emphasis level is determined by how many sub-drivers in the enabled slices are driven by post-cursor input. A prototype transmitter with a voltage-mode driver implemented in a 65-nm CMOS logic process consumes 34.8-mW from a 1.2-V power supply and its pre-emphasized output signal shows 165-mVpp,diff and 0.56-UI eye opening at the end of a cable with 10-dB loss at 3-GHz.

• 한국컴퓨터정보학회논문지
• /
• 제22권8호
• /
• pp.33-39
• /
• 2017

In this paper, we propose a method which implements warning to drivers through real-time analysis of risky and unexpected driver and vehicle behavior using only a smartphone without using data from digital tachograph and vehicle internal sensors. We performed the evaluation of our system that demonstrates the effectiveness and usefulness of our method for risky and unexpected driver and vehicle behavior using three information such as vehicle speed, azimuth and GPS data which are acquired from a smartphone sensors. We confirmed the results and developed the smartphone application for validate and conducted simulation using actual driving data. This novel functionality of the smartphone application enhances drivers' situational awareness, increasing safety and effectiveness of driving.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.1-5
• /
• 2010

The purpose of the paper is to review current trends and future issues of automotive ergonomics. The current trends include 1) universal design considering for regional differences, elderly drivers, female drivers, 2) quantification of driver's discomfort 3) trade-off between design trends and comfort, 4) digital ergonomic evaluation with digital human models 5) optimization of driver's interface. The future issues of automotive ergonomics cover 1) intelligent driver assistance system 2) Fun-to-drive and 3) differentiation from other vehicles based on ergonomics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.523-531
• /
• 2007

The research for the improvement of the aptitude test system in the field of railroad is progressing actively in advanced countries. Our government is also promoting some systematic supplementation for railroad safety on the basis of the Railroad Safety Act. In this paper, we focus our attention on an improvement of the present aptitude test system which will lead to the improvement of the safety supervision of Korean railroad. For this purpose, we perform a comparative analysis of domestic and foreign aptitude test systems for train drivers. We provide useful information that is needed to derive desirable aptitude test systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.507-513
• /
• 2007

Since 1971, the aptitude test for domestic train drivers has been long maintained. With the revision of the Railroad Safety Act in 2006, the aptitude test was changed from the type of written and skill test into the type of question-and-answer and reaction test. However, the main structure of the test was not changed. In this paper, we focus our attention on the improvement of the present aptitude test. We surveyed on two groups, one is the railroad expert group and another is train driver's group, questioning about the importance of the domestic and foreign aptitude test items. Based on the analysis, we suggest desirable aptitude test system for the railroad safety.

• 산업경영시스템학회지
• /
• 제23권58호
• /
• pp.71-79
• /
• 2000

In this study, through the roadside interview, drivers'feeling about fatigue has been evaluated synthetically and systematically when they drive a vehicle according to their sex, vehicle type, driving career, etc. Also, with the human sensibility evaluation technique, we grasped the human sensibility structure for the fatigue in a vehicle and as an objective evaluation index for comfort and fatigue in a vehicle, we developed a sensibility database. Through the survey and research, extracting and understanding the importance of factors which have influence on the fatigue in driving can be used as basic data that can suggest more comfort and pleasant driving environment to drivers. Also, human sensibility database regarding to the comfort and fatigue in a vehicle can be used as basic data in ergonomic vehicle design, evaluation for seat , comfort seat development, development of vibration reduction method and so on.

• The Journal of Korean Physical Therapy
• /
• 제21권3호
• /
• pp.81-86
• /
• 2009

Purpose: This study compared the characteristics of the brake response time during the driving task between elderly and younger drivers. Methods: The participants consisted of an elderly group (n=12) and a younger group (n=12). The brake response time (BRT), which consisted of the reaction time (RT) and movement time (MT), was assessed in an actual driving car. The BRT was measured at the initiation and termination of the brake response for the driving task Results: The elderly group showed a significantly longer delay in the initiation and termination of the brake response than the younger group. The BRT correlated significantly with both the RT and MT. However, the RT showed a more significant correlation. Conclusion: A delay in the initiation and termination of the brake response may have clinical implications. A further study will be needed to determine the different factors contributing to the driving performance of elderly drivers.

• 월간산업보건
• /
• 통권2호
• /
• pp.4-10
• /
• 1988

In order to investigate the prevalence of occupational disease in coal mine workers in Chonnam area, a cross sectional study was conducted in 1,097 workers from September to December in 1987. The results were as follows; 1. The prevalence of pneumoconiosis including suspected cases was 6.9% and was increased by age and working duration. 2. The prevalence of pneumoconiosis excluding suspected cases was 2.8%. 3. By the kind of job, prevalence of pneumoconiosis including suspected cases was l2.9% in tunnel drivers, 6.3% in coalface workers and 6.0% in other workers. 4. The prevalence of noise induced hearing loss was 5.1% and was increased by age and working duration. 5. The prevalence of noise induced hearing loss was the highest among tunnel drivers(7.3%), but it was not significantly different by the kind of job. 6. Occupational disease caused by vibration was not found in coal mine workers.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.65-68
• /
• 2003

Using composite materials for lilting train system has many advantages such as manufacturing variety, specific high-strength & stiffness characteristics, and long-life durability, but the strongest advantage could be the possibility of lightweight product. In the leading countries, the composite materials are used for the material fer drivers' cabs, interior/exterior equipments for railway train, and it is now developing the composite materials applied for the train car body structure. In this paper, we examine the use of composite materials for the drivers' cabs and interior/exterior equipments for the developing tilting train in Korea, and review the car body design using composite materials.